CFC690 - Switch HAGER - Free user manual and instructions
Find the device manual for free CFC690 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switch |
| Brand | Hager |
| Model | CFC690 |
| Rated Voltage | 250 V AC |
| Rated Current | 10 A |
| Number of Poles | 1-pole |
| Material | Polycarbonate |
| Color | White (typical) |
| Dimensions (H x W x D) | 85 x 85 x 40 mm |
| Weight | 75 g |
| Mounting Type | Flush mount |
| Terminal Type | Screw terminal |
| Protection Class | IP20 |
| Operating Temperature | -5°C to +40°C |
| Certifications | CE, EN 60669 |
| Maintenance | Wipe with dry cloth; no solvents |
| Safety | Install by qualified electrician; disconnect power before servicing |
| Spare Parts | Contact Hager customer service |
| Warranty | 2 years (check local regulations) |
Frequently Asked Questions - CFC690 HAGER
How do I install the Hager CFC690 switch?
Ensure power is off. Connect the live wire to the common terminal and the switched wire to the L1 terminal. Use screw terminals. For detailed steps, consult a qualified electrician.
What is the maximum load for this switch?
The switch is rated for 10 A at 250 V AC. Do not exceed this load to avoid overheating.
Can I use the CFC690 with LED lights?
Yes, but ensure the total LED load does not exceed the switch's rating. For very low loads, use a compatible dimmer or relay.
Is this switch suitable for outdoor use?
No, it has IP20 protection, designed for indoor use only. Do not expose to moisture.
What tools do I need for installation?
You will need a screwdriver (flat or Phillips), wire strippers, and a voltage tester. Use appropriate wall box and screws.
How do I clean the switch?
Wipe with a dry soft cloth. Do not use abrasive cleaners or solvents.
What should I do if the switch feels hot?
Immediately turn off power and check the load. Overload or loose connections can cause heat. Contact an electrician.
Does the CFC690 come with a backbox?
No, the switch is sold separately. Use a standard flush-mount backbox (e.g., Hager U90 series).
Can I replace an existing switch with the CFC690?
Yes, if the existing wiring is compatible. Ensure the live and switched wires match the terminal markings. Turn off power before replacement.
Where can I find the user manual?
The manual can be downloaded for free from the notice-facile.com website or Hager's official site.
User questions about CFC690 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual CFC690 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CFC690 by HAGER.