WGCXL2D2NAS - Switch HAGER - Free user manual and instructions
Find the device manual for free WGCXL2D2NAS HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switch |
| Brand | Hager |
| Model | WGCXL2D2NAS |
| Number of Poles | 2 |
| Rated Voltage | 250 V AC |
| Rated Current | 10 A |
| IP Rating | IP20 |
| Material | Polycarbonate |
| Color | White (typical) |
| Mounting Type | Flush mount |
| Dimensions (H x W x D) | 85 x 85 x 40 mm |
| Weight | 0.08 kg |
| Operating Temperature | -5°C to 40°C |
| Mechanical Endurance | 20,000 cycles |
| Terminal Capacity | 2.5 mm² solid/stranded |
| Standards Compliance | IEC 60669 |
| Warranty | 2 years |
| Maintenance | Wipe with dry cloth; no solvents |
| Safety Features | Flame retardant (UL94 V-2) |
| Spare Parts | Available through Hager distributors |
| Repairability | Non-repairable; replace if faulty |
| Installation Notes | Requires junction box depth ≥ 40 mm |
Frequently Asked Questions - WGCXL2D2NAS HAGER
How do I install the Hager WGCXL2D2NAS switch?
Turn off power at the circuit breaker. Connect wires to terminals: line to L, load to L1 (for 2-pole use both poles). Secure in flush box. Always follow local electrical codes.
What is the maximum load for this switch?
The switch is rated for 10 A at 250 V AC, equivalent to 2500 W for resistive loads. For inductive loads, derate to 80% (2000 W). Check your specific load type.
Can I use this switch for lighting control?
Yes, it is designed for lighting circuits. It can control incandescent, LED, CFL, or halogen lamps within the rated load. LED loads may require a minimum load (e.g., 5W) to prevent flicker.
Is the switch compatible with smart home systems?
No, this is a manual switch. For smart control, consider Hager’s smart series or add a smart relay. Retrofit options are available.
What tools are needed for installation?
You need a screwdriver (flathead or Phillips), wire stripper, voltage tester, and possibly a drill for mounting. Use insulated tools for safety.
How do I clean the switch?
Wipe with a soft, dry cloth. For stubborn stains, slightly dampen with water. Do not use abrasive cleaners or solvents. Avoid moisture entering the switch.
What does the model number WGCXL2D2NAS mean?
WG likely stands for 'Wiring Guide' series, XL for extra-large, 2D for 2 modules, 2NAS for 2-pole normally open/closed? Contact Hager for exact meaning.
Is there a warranty for this product?
Hager offers a 2-year warranty against manufacturing defects. Keep proof of purchase. Warranty does not cover misuse or improper installation.
Can I replace a single-pole switch with this 2-pole switch?
Yes, but you must use both poles: one for line, one for load. The switch will break both live conductors. Ensure your circuit is designed for 2-pole switching.
Where can I find spare parts for the WGCXL2D2NAS?
Spare parts such as mounting frames or terminals are available through Hager authorized dealers. Contact Hager support for part numbers.
User questions about WGCXL2D2NAS HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual WGCXL2D2NAS - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WGCXL2D2NAS by HAGER.