MicroBlade MBI-311A-1T2N - Server Supermicro - Free user manual and instructions
Find the device manual for free MicroBlade MBI-311A-1T2N Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Blade Server Module |
| Model | MBI-311A-1T2N |
| Brand | Supermicro |
| Form Factor | Single-wide blade for MicroBlade chassis |
| Processor | Intel Xeon E-2100 or similar (socket LGA 1151) |
| Memory | DDR4 ECC UDIMM, up to 64 GB (2 slots) |
| Storage | 2x SATA3 2.5" hot-swap drive bays |
| Network | 2x 10GbE ports (Intel X550) |
| Expansion | 1x M.2 NVMe slot (optional) |
| Dimensions (W x D x H) | 5.0 x 10.5 x 1.7 in (12.7 x 26.7 x 4.3 cm) |
| Weight | 4.5 lbs (2.0 kg) |
| Power Consumption | 150W typical (depends on CPU load) |
| Input Voltage | 12V DC (from chassis backplane) |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Humidity | 8% to 90% (non-condensing) |
| Management | IPMI 2.0 with dedicated LAN |
| Compliance | FCC, CE, RoHS |
| Maintenance | Air filters should be cleaned every 3 months; fans are self-monitored |
| Safety Precautions | Disconnect power before servicing; avoid static discharge |
| Spare Parts Availability | PSU, fan modules, DIMMs, HDDs, M.2 SSD |
| Reparability | User-replaceable components: memory, drives, fans; CPU requires trained technician |
| General Information | Designed for high-density cloud computing; compatible with Supermicro MicroBlade chassis |
Frequently Asked Questions - MicroBlade MBI-311A-1T2N Supermicro
What type of processor does the Supermicro MicroBlade MBI-311A-1T2N support?
The MBI-311A-1T2N supports Intel Xeon E-2100 series processors with LGA 1151 socket. Always consult the latest compatibility list from Supermicro.
How much memory can I install?
It has two DDR4 ECC UDIMM slots supporting up to 64 GB total (32 GB per DIMM). Use registered or unbuffered ECC memory.
Can I use SATA or SAS drives?
The blade has two SATA3 2.5-inch drive bays for hot-swap hard drives or SSDs. SAS drives are not supported without additional controller.
What network interfaces are available?
It includes two 10 Gigabit Ethernet ports via Intel X550 controller. There is also an optional dedicated IPMI LAN.
Does this blade require a specific chassis?
Yes, the MBI-311A-1T2N is designed for the Supermicro MicroBlade chassis series (e.g., MBI-6118D, MBI-6128R). It cannot be used standalone.
How do I update the BIOS or firmware?
Updates can be performed via IPMI or bootable USB. Download the latest firmware from Supermicro's support website and follow the instructions in the manual.
What are the power requirements?
The blade receives 12V DC from the chassis backplane. No separate power supply is needed; the chassis PSU provides redundancy.
How can I troubleshoot if the blade does not boot?
Check LED indicators on the front panel. Verify that memory, CPU, and drives are properly seated. Use IPMI to check system event logs.
Is the blade hot-swappable?
Yes, the blade can be inserted or removed from the chassis without powering down, provided the chassis supports hot-swap.
How often should I clean the air filters?
Supermicro recommends cleaning air filters every 3 months to maintain airflow. The chassis filters are typically washable.
User questions about MicroBlade MBI-311A-1T2N Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual MicroBlade MBI-311A-1T2N - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MicroBlade MBI-311A-1T2N by Supermicro.