HR2026 - Electric razor DCG - Free user manual and instructions

Brand	DCG
Model	HR2026
Product Type	Electric Razor
Dimensions (approx.)	5.5 x 2.0 x 2.0 inches (140 x 50 x 50 mm)
Weight (approx.)	8.5 oz (240 g)
Power Source	Rechargeable Li-ion battery, universal voltage 100-240V
Charging Time	8 hours for full charge
Usage Time	Up to 45 minutes of cordless use
Blade System	Double foil shaving head with precision trimmer
Wet/Dry Use	Wet and dry operation for use with foam or gel
Cleaning	Rinseable under running water; includes cleaning brush
Pop-up Trimmer	Integrated pop-up trimmer for sideburns and mustache
Indicator Lights	LED charging indicator; low battery warning
Travel Lock	Yes, press and hold power button for 3 seconds
Included Accessories	Protective cap, cleaning brush, charging adaptor
Replaceable Parts	Replacement foil and cutter set available
Reparability	User replaceable blades and foils; no specialist tools required
Safety Features	Auto shut-off when overloaded; fully sealed waterproof design
Storage	Store in a dry place; not designed for continuous charging

Frequently Asked Questions - HR2026 DCG

How long does it take to fully charge the HR2026 razor?

The HR2026 requires approximately 8 hours for a full charge. An LED indicator lights up during charging and turns off when complete.

Can I use the razor in the shower?

Yes, the HR2026 is designed for wet and dry use. It is fully waterproof and can be used with shaving foam, gel, or in the shower.

How do I clean the razor?

Rinse the shaving head under running water after each use. Remove the foil and cutter for thorough cleaning. A cleaning brush is included for removing hair particles.

How often should I replace the blades and foils?

Replace the foil and cutter set every 6-12 months for optimal performance. Signs of wear include pulling hairs or reduced sharpness.

Can I use the razor while it is charging?

No, the HR2026 cannot be operated while charging. Unplug the adaptor and use cordlessly after a full charge.

What does the LED indicator mean?

A solid LED indicates charging in progress. The light turns off when fully charged. A flashing LED indicates low battery.

How do I use the pop-up trimmer?

Slide the pop-up trimmer switch located on the side of the razor. Use it for precise trimming of sideburns, mustache, or beard lines.

Is the razor suitable for sensitive skin?

The HR2026 features gentle foil technology that minimizes irritation. Use the wet function with a moisturizing shave gel for extra comfort.

What should I do if the razor stops working?

Check if the battery is fully charged. If it still does not work, ensure the foils and cutters are properly assembled. If the problem persists, contact customer support.

Does the razor come with a warranty?

Yes, the DCG HR2026 is covered by a 2-year limited warranty against manufacturing defects. Keep your proof of purchase for service claims.

USER MANUAL HR2026 DCG

Black and white photo of a DCG professional barber brush with three circular brushes (no text or symbols visible on the device body)

CARATTERISTICHE TECNICHE

Batteria: al litio da 600mAh

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Shaver

1. Take off the shelter and press the switch.
2. Softly touch your skin and move in the contrary growth direction of beards slowly.
3. If you stretch your skin tightly, you can obtain better effect.
4. Once the shaving is over, push the switch down at once and cover it with the shelter.

Trimmer

1. Open the back cover and pull off the trimmer.
2. Softly touch your skin in the right-angle direction with the trimmer and trim slowly.
3. After using, push down the switch and cover it with the shelter.

4. Press the switch and take off the shelter. Press the outer-cutter button and take off the outer cutter. Clean the beards on the outer cutter, the inner cutter and the body (1 time a week).

5. After cleaning, assemble the outer cutter and the inner cutter on the original position and cover it with the shelter.

6. Don't press the net shelter.

7. Don't prizes open the net shelter with a screw with a screw driver.

Maintenance

1. Remove the protective cover of the grid
2. Press the button (located under the head) to separate the shaver head and body.
3. Also press the button on the back of the unit to remove the trimmer.
4. Remove the beard hairs with the brush provided and, if necessary, use a damp cloth to clean the body.
5. After cleaning, reassemble the razor head with body in accordance with the initial position and place the trimmer on the original position.
6. Replace the cover.

Charging

1. Push the switch down and close electrical power.
2. The charging indicator is on, which shows that it is charging.
3. After 2H, charging is over. Charging power is 220-240V\~50/60Hz.
4. At first using, be sure the scored power is completely out, before charging, which can durable the battery.

* Before cleaning switch the device off with the on/off switch. Open the battery compartment. Take the cleaning brush out of the holder on the battery compartment over and remove the battery form the battery compartment.
* Turn the shearing head to the left to loosen it and then pull it out. Pull out the shearing blade with caution. Warning: the cutting blade is sharp! DANGER OF INJURY!
* Brush the shearing head and clamp in a star-shaped manner. Remove even the smallest bits of hair by blowing.
* Mount the shearing head back on the drive shaft of the device and screw it on b turning to the right.
* After cleaning insert the cleaning brush back into the holder, insert the battery and close the battery cover.
* Push the protection cap back on the shearing head.

Before cleaning switch off the appliance

Always disconnect the apparatus and to let it cool before cleaning.

Clean the outside of the apparatus with a sponge or slightly wet linen.

Never plunge the apparatus in water or all other liquid!

Do not use abrasive cleaners, gritting, or metal brush or another cutting object.

STORAGE

• Ensure the unit is completely cool and dry.
• Do not wrap the cord around the appliance, as this will cause damage.
• Keep the appliance in a cool, dry place.

SPECIFICATIONS

Razor

Power supply: 220-240V\~ 50/60Hz

Power: 3W

Norm: Class II

Battery: 600MAH Lithium

Charging: 2H

Working: 60mins

ENVIRONMENTAL PROTECTION

(Destruction of Ni-MH or Ni-Cd batteries)

The appliance must be disconnected from the main power, when the battery is removed.

To remove the battery:

• Remove the two screws located in the upper part,
• Remove the screws at the back under the plate.
• Disassemble the two parts of the unit and remove the battery.
• THE BATTERY MUST BE REMOVED BEFORE THE UNIT IS GIVEN TO REBUS.
• THE BATTERY MUST BE ELIMINATED IN A SAFE WAY.

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)