31LE-ACC-AU - Pan Quadra-Fire - Free user manual and instructions
Find the device manual for free 31LE-ACC-AU Quadra-Fire in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pellet Stove |
| Brand | Quadra-Fire |
| Model | 31LE-ACC-AU |
| Heating Capacity | Up to 2,500 sq ft (232 m²) |
| Hopper Capacity | 60 lbs (27 kg) |
| Burn Time (Low Setting) | Up to 48 hours |
| Fuel Type | Wood Pellets (Premium grade recommended) |
| Dimensions (H x W x D) | 25.5" x 26" x 22" (648 x 660 x 559 mm) |
| Weight | 300 lbs (136 kg) |
| Electrical Rating | 120V, 60Hz, 1.5A |
| Ignition Type | Automatic with Accu-Tron control |
| Venting Requirements | 3" or 4" venting system |
| EPA Certified | Yes |
| Mobile Home Approved | Yes |
| Remote Control | Optional |
| Warranty | Limited Lifetime (firebox & heat exchanger), 2 years parts |
| Daily Maintenance | Clean glass, remove ash |
| Annual Maintenance | Clean baffle, inspect venting |
| Safety Features | Auto shutoff, cool-to-touch glass, overheat protection |
| Replacement Parts | Use only genuine Quadra-Fire parts for repair |
Frequently Asked Questions - 31LE-ACC-AU Quadra-Fire
How do I start the 31LE-ACC-AU for the first time?
Ensure the hopper is filled with premium wood pellets, plug in the unit, and press the ON button. The automatic ignition will activate. Refer to the manual for specific startup procedures.
What do the error codes E1 and E2 mean?
Error code E1 indicates a failed ignition (check pellets, igniter, or venting). E2 indicates a combustion air failure (ensure vents are clear). Consult the manual for full code list.
How often should I clean the glass?
Clean the glass daily to maintain clear viewing. Use a non-abrasive cleaner and soft cloth to avoid scratches.
Can I use the stove during a power outage?
No, the 31LE-ACC-AU requires electricity for the auger, igniter, and fans. A backup generator is recommended for outages.
What type of pellets should I use?
Use premium grade wood pellets with low ash content (under 1%) for best performance and less maintenance.
How do I adjust the heat output?
Use the Accu-Tron thermostat or manual controls to select heat levels 1-5. Higher levels increase pellet feed rate and fan speed.
Why is the stove not igniting?
Check that the hopper has pellets, the igniter is clean, and the venting is clear. Also ensure the door is properly closed.
How do I perform a deep clean?
At the end of each heating season, vacuum the firebox, clean the baffle, and remove ash from the venting. Empty the hopper if storing.
Is the stove safe for use around children?
The exterior stays cool-to-touch, but the glass and venting get hot. Always supervise children and maintain a 36-inch clearance around the stove.
Where can I find replacement parts?
Contact your local Quadra-Fire dealer or visit quadrafire.com to order genuine parts. Use only approved components for safety.
User questions about 31LE-ACC-AU Quadra-Fire
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pan in PDF format for free! Find your manual 31LE-ACC-AU - Quadra-Fire and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 31LE-ACC-AU by Quadra-Fire.