SC813MT-410C - Server Supermicro - Free user manual and instructions
Find the device manual for free SC813MT-410C Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server (1U Rackmount) |
| Brand | Supermicro |
| Model | SC813MT-410C |
| Form Factor | 1U Rackmount Chassis |
| Dimensions (H x W x D) | 1.75 in x 17.2 in x 25.6 in (44.5 mm x 437 mm x 650 mm) |
| Weight | Approx. 30 lbs (13.6 kg) depending on configuration |
| Power Supply | 410W Single Power Supply (Model 410C) |
| Supported Processors | Dual Intel Xeon 5500/5600 Series (Nehalem/Westmere EP) |
| Memory Support | Up to 256GB DDR3 ECC Registered (16 DIMM slots) |
| Drive Bays | Up to 4 x 3.5-inch Hot-Swap SATA/SAS (or 8 x 2.5-inch with optional tray) |
| Ethernet | Dual Gigabit Ethernet via Intel 82574L controllers |
| Remote Management | IPMI 2.0 with Dedicated LAN |
| Expansion Slots | 1 PCI-E 2.0 x8 (low-profile) and 1 PCI-E 2.0 x4 (low-profile) |
| Cooling | 4 x 40mm heavy-duty fans with fan speed control |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Maintenance | Clean dust filters monthly; avoid moisture; ensure proper ventilation |
| Safety Precautions | Use ESD grounding; disconnect power before servicing; do not block air vents |
| Replaceable Parts | Hot-swap fans, hard drives, and power supply; tool-less drive and fan trays |
| Repair Difficulty | Moderate; some components require basic tools |
| Warranty | Standard 1-year limited warranty (extendable) |
Frequently Asked Questions - SC813MT-410C Supermicro
How many drives can I install in the Supermicro SC813MT-410C?
The chassis supports up to 4 hot-swap 3.5-inch SATA/SAS drives. With an optional 2.5-inch drive tray kit, it can accommodate up to 8 x 2.5-inch drives.
What type of processors does the SC813MT-410C support?
It supports dual Intel Xeon processors from the 5500/5600 series (Nehalem/Westmere EP architectures). These are Socket LGA1366 CPUs.
How much RAM can I install?
The server supports up to 256GB of DDR3 ECC Registered memory in 16 DIMM slots. Ensure you use compatible registered modules.
Does the SC813MT-410C include remote management?
Yes, it has an integrated IPMI 2.0 controller with a dedicated management LAN port for remote monitoring and control.
How do I reset the IPMI to factory defaults?
If you have physical access, you can reset IPMI by clearing the CMOS/jumper or using the IPMI web interface's factory reset option. Alternatively, run ipmitool raw 0x32 0x66 to cold reset.
What power supply is included?
The model '410C' indicates a single 410W power supply. It is a standard ATX form factor and can be replaced with a compatible unit if needed.
Is the server rackmountable?
Yes, it is a 1U rackmount chassis that fits standard 19-inch racks. Rack rails are usually included or sold separately.
How do I update the BIOS?
Download the latest BIOS from Supermicro's support site. Use a bootable USB drive with the BIOS utility (e.g., AFUDOS or FreeDOS). Boot the server, run the flasher, and follow instructions.
Can I use SAS drives in addition to SATA?
Yes, if you have a compatible SAS controller (e.g., onboard or add-on), the backplane supports both SATA and SAS drives. Check your controller's specifications.
What is the recommended maintenance for this server?
Regularly clean dust from filters and fans every 3-6 months. Keep the ambient temperature below 35°C. Ensure all hot-swap components are securely seated. Use ESD precautions when working inside.
User questions about SC813MT-410C Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SC813MT-410C - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC813MT-410C by Supermicro.