FHT2300D - Access Control System ZKTeco - Free user manual and instructions
Find the device manual for free FHT2300D ZKTeco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control System |
| Brand | ZKTeco |
| Model | FHT2300D |
| Dimensions (W x H x D) | 150 mm x 80 mm x 30 mm |
| Weight | 0.3 kg |
| Power Supply | 12V DC, 1A |
| Power Consumption | ≤ 5W |
| Authentication Methods | Fingerprint, RFID Card, Password |
| Fingerprint Capacity | 3,000 templates |
| Card Capacity | 10,000 cards |
| Display | 2.8 inch TFT color screen |
| Communication | TCP/IP, RS485, USB Host |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 20% to 80% |
| Tamper Alarm | Yes |
| Wiegand Input/Output | Support |
| Door Lock Control | Relay output (dry contact) |
| Maintenance | Clean with soft dry cloth; avoid solvents |
| Security Features | Anti-passback, Duress alarm, Lockout |
| Included Accessories | Mounting bracket, screws, power adapter, quick start guide |
| Spare Parts / Repairability | Sold separately: power supply, cable, reader module |
| Warranty | 1 year (depending on region) |
| Compliance | CE, FCC, RoHS |
Frequently Asked Questions - FHT2300D ZKTeco
How do I reset the FHT2300D to factory defaults?
Press and hold the reset button (located on the back panel) for 5 seconds until the device beeps. Alternatively, navigate to Menu > System Settings > Factory Reset.
What types of cards are compatible with this device?
The FHT2300D supports 125kHz EM and 13.56MHz Mifare cards. Ensure cards are formatted correctly before use.
How many fingerprints can be stored?
The device can store up to 3,000 fingerprint templates. For optimal performance, register each finger multiple times.
Can I connect the device to a computer?
Yes, via TCP/IP or USB Host. Use ZKTeco's ZKAccess software for user management and logs.
What should I do if the fingerprint sensor is not reading?
Clean the sensor with a soft dry cloth. Avoid scratches. If issue persists, recalibrate the sensor in System Settings > Sensor Calibration.
How do I add a new user?
Go to User Management on the device. Select Add User, then choose authentication method (fingerprint, card, or password). Follow on-screen instructions.
Does the device have an anti-passback feature?
Yes, anti-passback is supported. Enable it under Access Control > Anti-Passback. Configurable for hard or soft anti-passback.
What is the default IP address?
The default IP is 192.168.1.201 with subnet mask 255.255.255.0. Reset to change via DHCP or static assignment.
How do I update firmware?
Download the latest firmware from ZKTeco's website. Copy to a FAT32 formatted USB drive, insert into the device, and navigate to System Settings > Firmware Update.
What is the operating temperature range?
The FHT2300D operates between 0°C and 45°C (32°F to 113°F) with humidity 20%–80% non-condensing.
User questions about FHT2300D ZKTeco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual FHT2300D - ZKTeco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FHT2300D by ZKTeco.