926-25102-WGB - Temperature and Humidity Sensor LA CROSSE TECHNOLOGY - Free user manual and instructions

Product Type	Wireless Weather Station
Model Number	926-25102-WGB
Brand	La Crosse Technology
Dimensions (Display)	Approx. 7.5 x 4.5 x 1 inches
Weight	Approx. 0.5 lbs (without batteries)
Power Supply	2 AA batteries for display; 2 AA batteries for remote sensor
Remote Sensor Range	Up to 330 feet (100 meters) open air
Temperature Range (Indoor)	32°F to 122°F (0°C to 50°C)
Temperature Range (Outdoor)	-40°F to 140°F (-40°C to 60°C)
Humidity Range (Indoor)	1% to 99% RH
Humidity Range (Outdoor)	1% to 99% RH
Display Features	Time, date, indoor/outdoor temperature and humidity, forecast icons, moon phase
Atomic Time Sync	Yes (WWVB receiver)
Main Functions	Temperature, humidity, weather forecast, time, date, alarm, backlight
Care and Cleaning	Wipe with soft dry cloth; avoid water exposure
Safety	Keep away from direct sunlight and moisture; use recommended batteries
Spare Parts & Reparability	Replacement sensors available; contact La Crosse Technology for service
General Information	Wireless transmission at 433 MHz; wall mountable display

Frequently Asked Questions - 926-25102-WGB LA CROSSE TECHNOLOGY

How do I set up the La Crosse Technology 926-25102-WGB weather station?

Insert two AA batteries into the display and outdoor sensor. Place the sensor outdoors. The display will automatically sync. For atomic time, place near a window.

Why is the outdoor sensor not showing readings?

Check that the sensor is within 330 feet of the display. Replace batteries if low. Ensure no obstructions. Press the 'TX' button on the sensor to resync.

How do I change the batteries?

Use fresh AA alkaline batteries. Remove the battery door on each unit, replace batteries, and close the door. The display will update automatically.

Does this weather station sync to atomic time?

Yes, it receives the WWVB signal from Fort Collins, Colorado. The display will automatically set time and date after syncing.

Can I mount the display on a wall?

Yes, the display has a built-in stand and a keyhole slot for wall mounting. Use screws appropriate for your wall type.

What does the weather forecast icon mean?

The display uses barometric pressure trends to predict weather for the next 12-24 hours. Icons include sunny, partly cloudy, cloudy, rainy, and stormy.

How do I set an alarm?

Press and hold the 'ALARM' button until the hour flashes. Use +/- to adjust. Press again to set minutes. Press 'ALARM' to confirm. Toggle alarm on/off with the 'SNOOZE' button.

Why is the time wrong after battery change?

The atomic sync may take up to 24 hours. Ensure the display is in a location with good signal (near a window). You can manually set time by pressing 'SET'.

What is the range of the outdoor sensor?

The maximum range is 330 feet (100 meters) in open air. Walls and interference can reduce range. Place sensor within 100 feet for best results.

How do I clean the weather station?

Use a soft, dry cloth to clean the display and sensor. Do not use water or cleaning chemicals. Keep the sensor free of snow and ice for accurate readings.

USER MANUAL 926-25102-WGB LA CROSSE TECHNOLOGY

WARRANTY AND SUPPORT

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support with questions or visit our online help:

Phone: [phone]

Online Product Support and Registration:

https://www.lacrossetechnology.com/support/lacrossealertsmobile/

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part '5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Roomort or relocate the receiving antenna.

- increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected:

- Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Operation is subject to the following two conditions:

(i) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this equipment. Such changes or modifications could void the user authority to operate the equipment.

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences.

All trademarks and patents are recognized.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.

Google Play and the Google Play logo are trademarks of Google Inc.

By LA CROSSE TECHNOLOGY® MOBILE™

Temperature/Humidity Sensor Set with Probe

CONTENTS NOT INCLUDED

1. Sensor TX60U-IT
2. One Probe (wet, dry, or threaded)
3. Screws & anchors
4. GW1000-U gateway, power cord, and LAN cable

• High speed INTERNET service and router to connect gateway
- Mobile device with cellular or WiFi service to use app

Model: TX60U-IT

DC: 041318

SETUP

Setup Video: www.lacrossetechnology.com/support/lacrossealertsmobile/

1. Connect gateway to router.
2. Insert power cord into outlet and into the gateway.
3. Wait for 4 red blinks
4. Optional: Insert Probe into sensor.
5. Insert 2 AAA batteries into sensor. Observe correct polarity.
6. Download La Crosse Alerts Mobile App.

1. Follow the on screen instructions.

GATEWAY LIGHTS

4 BLINKS: Ready to register

NO LIGHT: Check power cord

3 BLINKS: Cannot find server

RED/GREEN LIGHTS BLINK: Delete existing registration

2 BLINKS: No IP address

SOLID RED: Registered

1 BLINK: Check LAN cable

FACTORY RESET

Gateway:

1. Remove power cord
2. Hold gray button & insert power cord
3. Continue to hold until red light flashes twice. Release button.
4. When light flashes 4 times, register.

Sensor:

1. Hold gray button on sensor until sensor display resets.

CARE AND MAINTENANCE

• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
  • Always purchase the correct size and grade of battery most suitable for intended use;
• Clean the battery contacts and also those of the device prior to battery installation;
• Ensure the batteries have with correct polarity (+ / -)
• Remove batteries from equipment that will not to be used for an extended period.
• Promptly remove expired batteries.

SPECIFICATIONS

• Temperature: -40°F to 140°F (-40°C to 50°C)
• Humidity: 3% RH to 99% RH
• Probe Temperature: -40°F to 140°F (-40°C to 50°C)
• Transmission: 200 ft. (60.96m) in open air
- Battery Requirements: Sensor: 2 "AAA" (LR3) battery (not included)
- Dimensions: 1.44" L x 0.76" W x 5.73" H (3.66 L x 1.93 W x 14.55 H cm)

System Requirements:

• iOS 8 or greater is required with a Safari browser
• Android 4.0.3 or greater is required with Chrome or Stock browser

Browser:

• Mac supported versions (min) OSX 10.8, 10.9 or 10.10 with Safari 6.1.1+, Chrome 36+ or Firefox 39+
- Windows supported versions (min) 7/SP1, 8.1/Update 1, or 10 (Pro/Home) with Chrome 36+, Firefox 39+ or Internet Explorer 10/11.

⚠ WARNING: This product can expose you to chemicals including styrene, which is known in the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov