PLMRKT9 - Receiver Pyle - Free user manual and instructions
Find the device manual for free PLMRKT9 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Marine Audio Receiver |
| Brand | Pyle |
| Model | PLMRKT9 |
| Dimensions (W x H x D) | 7.0 x 5.0 x 2.0 inches |
| Weight | 1.5 lbs |
| Power Supply | 12V DC (negative ground) |
| Bluetooth | Yes, version 4.0 with A2DP |
| USB Port | Yes, for MP3/WMA playback and charging |
| FM Radio | Yes, with 30 presets |
| AUX Input | Yes, 3.5mm front panel |
| Max Power Output | 4 x 50 watts RMS |
| Water Resistance | IPX5 splashproof |
| Display | LCD with white backlight |
| Remote Control | Included wireless remote |
| Mounting | DIN standard or surface mount |
| Cleaning | Wipe with damp cloth; no harsh chemicals |
| Safety | Disconnect power before installation; use proper fuse |
| Spare Parts | Available via Pyle support (optional) |
Frequently Asked Questions - PLMRKT9 Pyle
How do I pair my phone via Bluetooth?
Press the BT button on the receiver to enter pairing mode. On your phone, search for PLMRKT9 and connect. Use PIN 0000 if prompted.
Does this receiver work with marine speakers?
Yes, it is designed for marine environments and can drive 4-ohm marine speakers up to 50W RMS per channel.
How do I reset the receiver?
Press the Reset button on the front panel with a paperclip. Alternatively, disconnect the power for 30 seconds.
What is the maximum USB drive size supported?
It supports USB drives up to 32GB formatted in FAT32.
Why is there no sound?
Check that the volume is not muted, speakers are connected properly, and the source is selected. Also verify the fuse is intact.
Can I control the receiver from my steering wheel?
Yes, it supports wired remote control via an optional adapter (not included).
How do I set the clock?
Press and hold the DISP button until the time flashes. Use the volume knob to adjust hours and minutes, then press DISP again to save.
What is the operating voltage?
It operates on 12V DC negative ground, typical for cars and boats.
Is the receiver weatherproof?
It has an IPX5 rating, meaning it can withstand splashes of water, but should not be submerged.
How do I update the firmware?
Firmware updates are not user-serviceable. Contact Pyle support for assistance if needed.
User questions about PLMRKT9 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PLMRKT9 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLMRKT9 by Pyle.