ZV680YSS - Range hood GE - Free user manual and instructions
Find the device manual for free ZV680YSS GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Under-cabinet range hood |
| Brand | GE |
| Model | ZV680YSS |
| Width | 30 inches |
| Depth | 19.5 inches |
| Height | 12 inches (adjustable) |
| Weight | Approximately 35 lbs |
| Power Source | 120 V, 60 Hz, 15 A |
| Fan Speeds | 4 speeds |
| Max Airflow | 600 CFM |
| Noise Level | 1.5 to 6.5 sones |
| Lighting | 2 x 50W halogen (or LED equivalent) |
| Filter Type | Aluminum mesh, dishwasher-safe |
| Ducting | Convertible: vented or recirculating (kit required) |
| Duct Size | 6 inches round |
| Finish | Stainless steel |
| Control Type | Electronic touch controls |
| Features | Dishwasher-safe filters, heat sensor auto-off |
| Installation Type | Under-cabinet |
| Warranty | 1 year limited |
Frequently Asked Questions - ZV680YSS GE
How do I install the GE ZV680YSS range hood?
The GE ZV680YSS is designed for under-cabinet installation. Ensure the power is off. Secure the hood to the cabinet using the provided screws. Connect ductwork if venting outside, or install a recirculation kit for non-ducted use. Refer to the manual for detailed steps.
How do I clean the filters?
The aluminum mesh filters are dishwasher-safe. Remove them by pulling the latch, then wash in the dishwasher on a gentle cycle. Alternatively, hand wash with warm soapy water. Allow to dry completely before reinstalling.
How often should I replace the filters?
Aluminum mesh filters are reusable and should be cleaned every 1-2 months depending on use. Replace them if they become damaged or permanently clogged, typically every 2-3 years.
Does the range hood require ducting?
The ZV680YSS can be used with ducting (vented) or without (recirculating). For recirculating operation, a charcoal filter kit (sold separately) is required. The manual includes instructions for both setups.
Why is my range hood noisy?
Noise levels vary from 1.5 to 6.5 sones depending on speed setting. If unusually noisy, check for loose parts, blocked ductwork, or dirty filters. Ensure the hood is securely mounted.
How do I change the light bulbs?
Turn off power to the hood. Remove the bulb cover if present. The ZV680YSS uses 2 x 50W halogen bulbs (GU10 base). Replace with the same type. For LED replacements, ensure compatibility.
What are the dimensions of the GE ZV680YSS?
The width is 30 inches, depth approximately 19.5 inches, and height 12 inches (adjustable with telescoping chimney). Always measure your space before installation.
Can I install this hood over a gas stove?
Yes, it is suitable for use over gas cooktops. Ensure the hood is installed at least 24-30 inches above the cooking surface as per local codes and the manual.
How do I reset the heat sensor?
If the hood automatically shuts off due to excessive heat, wait for it to cool down. The auto-off heat sensor resets automatically. Clean the filters and ensure proper ventilation to prevent recurrence.
Where can I find replacement parts?
Replacement parts like filters, bulbs, and recirculation kits can be ordered from GE Appliances' official website or authorized dealers. Use the model number ZV680YSS for compatibility.
User questions about ZV680YSS GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ZV680YSS - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZV680YSS by GE.