MegaView AV1125 - Security Camera Arecont Vision - Free user manual and instructions
Find the device manual for free MegaView AV1125 Arecont Vision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | MegaView AV1125 |
| Image Sensor | 1.2 Megapixel CMOS |
| Resolution | 1280 x 1024 (SXGA) |
| Lens Type | Fixed focal length, 3.6mm |
| Minimum Illumination | 0.1 lux (color) |
| Day/Night Mode | Mechanical IR cut filter |
| Power Supply | 12V DC or PoE (IEEE 802.3af) |
| Power Consumption | 5W typical |
| Dimensions (W x H x D) | 2.75 x 2.75 x 5.5 inches |
| Weight | 1.2 lbs (0.54 kg) |
| Video Compression | H.264, MJPEG |
| Frame Rate | Up to 30 fps at 1.2MP |
| Network Interface | 10/100Base-T Ethernet |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Weather Resistance | IP66 (outdoor rated) |
| Motion Detection | Built-in, configurable |
| Audio Support | Two-way audio via external mic/speaker |
| Mounting Type | Wall or ceiling mount |
| Cleaning Instructions | Use a soft, dry cloth. Avoid abrasive cleaners. |
| Safety Warnings | Read user manual before installation. Use only certified power supply. |
| Spare Parts and Repairability | Contact Arecont Vision support for replacement parts. Not user-serviceable. |
| General Information | Manufacturer: Arecont Vision. Model: MegaView AV1125. Category: Security Camera. |
Frequently Asked Questions - MegaView AV1125 Arecont Vision
How do I connect the MegaView AV1125 to my network?
Connect the camera to your network using an Ethernet cable. The camera supports PoE, so you can power it through the same cable if using a PoE switch or injector. Ensure your network settings (DHCP or static IP) are configured correctly.
What is the maximum resolution of the AV1125?
The MegaView AV1125 provides a maximum resolution of 1280 x 1024 pixels (SXGA) at up to 30 frames per second.
Can I use this camera outdoors?
Yes, the camera is rated IP66 for weather resistance, making it suitable for outdoor use in rain or dust.
Does the AV1125 support night vision?
The camera features a mechanical IR cut filter for day/night mode, but it does not have built-in IR LEDs. You will need external IR illumination for complete darkness.
How do I reset the camera to factory defaults?
Press and hold the reset button (located near the Ethernet port) for 10 seconds while the camera is powered on. The camera will reboot with default settings.
What video compressions are supported?
The camera supports H.264 and MJPEG compression. H.264 offers efficient bandwidth usage while maintaining good video quality.
Can I view the camera feed on my smartphone?
Yes, you can access the camera remotely using the Arecont Vision software or a compatible third-party app. Ensure your network is configured for remote access.
What is the field of view?
The camera has a fixed 3.6mm lens, providing a horizontal field of view of approximately 70 degrees. Check the manual for exact specifications.
Does the camera support audio?
Yes, it supports two-way audio via an external microphone and speaker (not included). Audio is transmitted over the network.
How do I update the firmware?
Download the latest firmware from the Arecont Vision support website. Access the camera's web interface, go to the Maintenance section, and upload the firmware file. Do not power off during the update.
User questions about MegaView AV1125 Arecont Vision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual MegaView AV1125 - Arecont Vision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MegaView AV1125 by Arecont Vision.