Vienda 1743 - Faucet Oras - Free user manual and instructions
Find the device manual for free Vienda 1743 Oras in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Basin Mixer Faucet |
| Model | Vienda 1743 |
| Brand | Oras |
| Material | Brass |
| Finish | Chrome-Plated |
| Handle Type | Single Lever |
| Number of Handles | 1 |
| Mounting Type | Deck-Mounted |
| Spout Type | Swivel Spout |
| Flow Rate (at 3 bar) | Approx. 5.7 L/min |
| Recommended Water Pressure | 1 - 10 bar |
| Connection Size | 3/8" Flexible Hoses |
| Weight (approx.) | 1.2 kg |
| Height (overall) | 150 mm |
| Spout Reach | 120 mm |
| Cartridge Type | Ceramic Disc Cartridge |
| Warranty | 5 Years (limited) |
| Country of Origin | Finland |
| Included Accessories | Fixing set, flexible hoses |
Frequently Asked Questions - Vienda 1743 Oras
How do I install the Oras Vienda 1743 faucet?
Installation should be performed by a qualified plumber. Ensure the water supply is turned off, then connect the flexible hoses to the corresponding hot and cold water pipes. Mount the faucet on the basin deck using the provided fixing set. Tighten the nuts and connect the hoses to the stop valves. Finally, turn on the water and check for leaks.
What is the recommended water pressure for this faucet?
The recommended operating water pressure is between 1 and 10 bar. For optimal performance, a pressure of around 3 bar is ideal.
How do I clean the Vienda 1743 faucet?
Clean the faucet with a soft damp cloth and mild soap. Avoid abrasive cleaners, scouring pads, or harsh chemicals that may damage the chrome finish. Rinse thoroughly and dry with a soft cloth.
What should I do if the faucet is leaking?
A leaking faucet often indicates a worn-out cartridge or O-ring. Turn off the water supply, disassemble the handle, and replace the ceramic disc cartridge. If the leak persists, check the connections and tighten any loose fittings. For complex issues, contact a professional.
The handle is stiff to move. What can I do?
A stiff handle may be due to mineral buildup or a failing cartridge. Try lubricating the cartridge with silicone grease. If the problem continues, replace the cartridge following the instructions in the manual.
Can I use this faucet with a low-pressure water system?
The faucet is designed for pressures between 1 and 10 bar. For low-pressure systems (below 1 bar), performance may be reduced. Contact Oras for specific recommendations.
What are the dimensions of the Vienda 1743?
The overall height is approximately 150 mm, with a spout reach of 120 mm. The faucet body diameter is about 50 mm. Exact dimensions can be found in the product manual.
Does the faucet come with a warranty?
Yes, the Oras Vienda 1743 comes with a limited 5-year warranty covering manufacturing defects. Warranty terms may vary by region. Keep the purchase receipt for service.
Where can I find spare parts for this faucet?
Spare parts such as cartridges, hoses, and handles are available from authorized Oras dealers or online spare parts stores. Use the model number Vienda 1743 to match the correct parts.
Is the spout swivel?
Yes, the spout can swivel for convenient use. Ensure the faucet is properly installed to allow smooth rotation.
User questions about Vienda 1743 Oras
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Faucet in PDF format for free! Find your manual Vienda 1743 - Oras and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vienda 1743 by Oras.