GSI 5570/1 IN - Dishwasher BAUKNECHT - Free user manual and instructions
Find the device manual for free GSI 5570/1 IN BAUKNECHT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Bauknecht |
| Model | GSI 5570/1 IN |
| Height | 85 cm |
| Width | 60 cm |
| Depth | 60 cm |
| Weight | Approx. 50 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 1900 W |
| Water Consumption per Cycle | 12 L (Eco program) |
| Noise Level | 44 dB(A) |
| Energy Efficiency Class | E (EU 2017/1369) |
| Number of Place Settings | 13 |
| Number of Programs | 6 (Eco, Intensive, Normal, Quick, Rinse, Soak) |
| Special Functions | Half Load, Delay Start (1-24h), Extra Dry |
| Safety Features | Water Leak Protection, Child Lock, Overfill Protection |
| Maintenance | Clean filters regularly, check spray arms, descale periodically |
| Spare Parts Availability | Filters, spray arms, detergent dispenser, door seal, heating element |
| Repairability Index | 7.5/10 (estimated) |
| Installation Type | Fully integrated (under counter) |
Frequently Asked Questions - GSI 5570/1 IN BAUKNECHT
How do I properly install the dishwasher?
Ensure the appliance is level and securely fastened. Connect to cold water supply (3/4 inch threaded hose) and drain hose to sink drain. Electrical connection must comply with local regulations; use a grounded outlet. Refer to the manual for exact dimensions and anti-tilt brackets.
What should I do if the dishwasher doesn't start?
Check if the door is fully closed and latched. Verify power supply and circuit breaker. Ensure water supply is turned on. If still not starting, the control board or door switch may be faulty.
How to clean the filters?
Remove the lower basket, then unscrew the cylindrical filter and lift out the flat filter. Rinse them under running water using a soft brush. Reinstall in reverse order. Clean filters every 2-3 months to maintain performance.
Why are dishes not drying completely?
Select a program with drying phase (e.g., Intensive). Use rinse aid and adjust dosage. Ensure the drying heating element is not obstructed. For plastic items, use the Extra Dry function if available.
What does error code E1 mean?
Error E1 indicates a water inlet issue. Check if water supply is open and hose is not kinked. Clean the inlet filter. If persists, the inlet valve may need replacement.
Can I use regular dish soap instead of detergent?
No, use only dishwasher detergent (powder, gel, or tablets). Regular dish soap causes excessive suds and can damage the machine, leading to leaks or poor cleaning.
How to remove bad odors from the dishwasher?
Run an empty cycle with a dishwasher cleaner or a cup of white vinegar on the top rack. Clean filters and door seal. Leave door slightly ajar between uses to allow drying.
What is the correct way to load dishes?
Place heavily soiled items facing the lower spray arm. Don't block spray arms. Put cups, glasses, and small items in the top basket. Secure long items like utensils properly. Avoid overlapping.
How to reset the dishwasher after a power outage?
Turn off the appliance, wait 30 seconds, then turn back on. Select and start a program. If display shows error, reset by pressing the start button for 3 seconds. If errors persist, consult manual.
Where can I get spare parts?
Contact Bauknecht authorized service centers or visit the official website for genuine parts. Common spares include filters, spray arms, and detergent dispenser. Use model number GSI 5570/1 IN for accurate ordering.
User questions about GSI 5570/1 IN BAUKNECHT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual GSI 5570/1 IN - BAUKNECHT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GSI 5570/1 IN by BAUKNECHT.