DFF100C2WDD - Freezer DANBY - Free user manual and instructions

Find the device manual for free DFF100C2WDD DANBY in PDF.

DANBY DFF100C2WDD - Freezer
📄 28 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice DANBY DFF100C2WDD - page 2
View the manual : Français FR English EN Español ES
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Freezer with Refrigerator Compartment
Brand Danby
Model DFF100C2WDD
Width 60.5 cm
Height 151.9 cm
Depth 77.1 cm
Power Supply 120 V, 60 Hz
Refrigerant Flammable (type R600a or similar)
Freezer Capacity Not specified, household use
Temperature Control Adjustable thermostat (MIN/MAX) for freezer and panel for refrigerator
Defrost Automatic
Interior Light Replaceable LED
Leveling Legs 2 adjustable legs
Door Reversal Possible (reversible)
Ice Cube Tray Flexible included
Cleaning Interior: baking soda solution; exterior: soft cloth and mild detergent
Maintenance Clean door gaskets regularly; do not use ammonia or alcohol
Warranty 18 months on functional parts (subject to conditions)
Customer Service 1-800-263-2629 (Danby)

Frequently Asked Questions - DFF100C2WDD DANBY

How to adjust the freezer temperature?
The freezer temperature control is located on the back wall of the compartment. Turn the knob: the MAX position gives the coldest, MIN the least cold. The midpoint is suitable for normal household use.
What to do if the freezer is not cooling enough?
Check that the plug is properly connected and the circuit breaker has not tripped. Ensure the door is closed tightly, the temperature setting is not too warm, and the unit is not near a heat source. Avoid opening the door too frequently.
How to reverse the door opening direction?
Follow the steps in the manual: remove the top hinge, freezer door, middle hinge, refrigerator door, then move the parts to the other side. Use the provided stops. Let the unit stand upright for 6 hours before plugging it back in after the operation.
How to clean the interior of the unit?
Unplug the unit. Use a soft cloth with a solution of one tablespoon of baking soda in one liter of water, or mild soap. Rinse and dry. Never use ammonia-based or alcohol cleaners.
Why is the unit making noise?
Normal noises can come from expansion of parts or refrigerant circulation. This is normal. If noise is excessive, check that the unit is level and not in contact with a wall.
How to defrost the unit?
This model has automatic defrost. Defrost water evaporates using compressor heat. No manual intervention is needed.
What to do in case of prolonged power outage?
If the outage lasts less than a few hours, avoid opening the door. If it is long, protect food by transferring it to a cooler. Wait 3 to 5 minutes before restarting the unit after power returns.
How to replace the interior LED bulb?
Unplug the unit. Press the tab at the bottom of the light cover to remove it. Gently pull the LED strip to disconnect it, then connect the new one and replace the cover. Contact customer service to obtain a new LED if needed.
Where to find spare parts?
Contact Danby consumer service at 1-800-263-2629. For parts like the LED strip, check warranty eligibility.
What is the warranty of this freezer?
Danby offers a limited 18-month warranty on functional parts for the original purchaser. Plastic parts are warranted for 30 days. The warranty does not cover damage due to improper installation, power failure, or commercial use.

User questions about DFF100C2WDD DANBY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Freezer in PDF format for free! Find your manual DFF100C2WDD - DANBY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFF100C2WDD by DANBY.

USER MANUAL DFF100C2WDD DANBY

Owner's Manual......1 - 8

FROST-FREE REFRIGERATOR

Welcome to the Danby family. We are proud of our quality products and we believe in dependable service. We suggest that you read this owner's manual before plugging in your new appliance as it contains important operation information, safety information, troubleshooting and maintenance tips to ensure the reliability and longevity of your appliance.

Visit www.Danby.com to access self service tools, FAQs and much more. For additional assistance call 1-800-263-2629.

Note the information below; you will need this information to obtain service under warranty. You must provide the original purchase receipt to validate your warranty and receive service.

Model Number: ____

Serial Number: ____

Date of Purchase: ____

Need Help?

Before you call for service, here are a few things you can do to help us serve you better.

Read this owner's manual:

It contains instructions to help you use and maintain your appliance properly.

If you receive a damaged appliance:

Immediately contact the retailer or builder that sold you the appliance.

Save time and money:

Check the troubleshooting section at the end of this manual before calling. This section will help you solve common problems that may occur.

Simple black-and-white icon of a telephone handset inside a circle (no text or symbols).

1-800-26-Danby

(1-800-263-2629)

DANBY DFF100C2WDD - Save time and money: - 2

Important Safety Information READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAFETY REQUIREMENTS

DANGER: Risk of fire or explosion. Flammable refrigerant used. Do not puncture refrigerant tubing.

  • Do not use mechanical devices to defrost refrigerator.
  • Ensure that servicing is done by factory authorized service personnel, to minimize product damage or safety issues.

WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

WARNING: Do not damage the refrigerant circuit.

WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

CAUTION: Risk of fire or explosion. Flammable refrigerant used.

  • Consult repair manual or owner's guide before attempting to service this product. All safety precautions must be followed.
  • Dispose of properly in accordance with federal or local regulations.
  • Follow handling instructions carefully.

CAUTION: Children should be supervised to ensure that they do not play with the appliance.

DANGER: Risk of child entrapment. Before throwing away an old appliance:

  • Remove the door or lid.
  • Leave shelves in place so that children may not easily climb inside.

SAFETY REQUIREMENTS

This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities may be different or reduced, or who lack experience or knowledge, unless such persons receive supervision or training to operate the appliance by a person responsible for their safety.

GROUNDING INSTRUCTIONS

This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.

This appliance has a cord that has a grounding wire with a 3-prong plug. The power cord must be plugged into an outlet that is properly grounded. If the outlet is a 2-prong wall outlet, it must be replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for.

WARNING - Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

Do not connect your appliance to extension cords or together with another appliance in the same wall outlet. Do not splice the power cord. Do not under any circumstances cut or remove the third ground prong from the power cord. Do not use extension cords or ungrounded (two prongs) adapters.

If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified person in order to avoid hazard.

INSTALLATION INSTRUCTIONS OPERATING

INSTRUCTIONS

LOCATION

  • Two people should be used when moving the appliance.
  • Remove interior and exterior packaging prior to installation. Wipe the outside of the appliance with a soft, dry cloth and the inside with a lukewarm wet cloth.
  • Place the appliance on a floor that is strong enough to support it when it is fully loaded.
  • Do not place the appliance in direct sunlight or near sources of heat, such as a stove or heater, as this can increase electrical consumption. Extreme cold ambient temperatures may also cause the appliance to perform improperly.
  • Do not use the appliance near water, for example in a wet basement or near a sink.
  • This appliance is intended for household use only. It is not designed for outside installation, including anywhere that is not temperature controlled (garages, porches, vehicles, etc.).
  • Before connecting the appliance to a power source, let it stand upright for approximately 6 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
  • This appliance is 60.5 cm (23.8 inches) wide by 151.9 cm (59.8 inches) high by 77.1 cm (30.4 inches) deep. Make sure that you leave the minimum amount of space between the appliance and all surrounding walls and vents.
  • Allow 12.7 cm (5 inches) of space between the back, sides and top of the appliance and all adjacent walls.
  • This appliance is intended for free-standing installation only and is not intended to be built into a cabinet or counter. Building in this appliance can cause it to malfunction.

FEATURES

  1. Wire Freezer Shelf
  2. Freezer Thermostat Control
  3. Magnetic Gasket
  4. Refrigerator Thermostat Control
  5. Interior Lights
  6. Wire Refrigerator Shelf
  7. Crisper
  8. Adjustable Feet

Diagram of a refrigerator interior with numbered compartments and labeled parts.

LEVELING INSTRUCTIONS

There are two adjustable feet on the bottom of the appliance that can be turned up or down to ensure that the appliance is level.

  1. Turn the leveling feet counter-clockwise as far as they will go, until the top of the foot is touching the bottom of the cabinet.
  2. Slowly turn the leveling legs clockwise until the appliance is level.

OPERATING INSTRUCTIONS

TEMPERATURE SELECTION

The refrigerator control panel is located on the back wall of the refrigerator compartment. Press the plus and minus button to reach the desired temperature.

The freezer temperature control is located on the back wall of the freezer compartment. The MAX position indicates the coldest setting. The MIN position indicates the warmest setting. The mid point of the dial should be sufficient for regular home use.

ICE CUBE TRAY

The appliance is supplied with a flexible ice cube tray. Gently twist the tray to remove the ice cubes. If the ice cube tray is frozen solid, run a little water over the tray to loosen the ice cubes. Never use sharp objects to remove the ice cube tray from the freezer as this can damage the refrigerant lines inside the freezer.

INTERIOR LIGHT

If the interior light burns out, the LED light strip can be replaced by following the steps below. Ensure that the appliance is unplugged before replacing the light strip.

  1. Remove the light cover by pressing upward on the tab on the bottom and pulling the light cover downward.
  2. Remove the LED light strip by gently pulling it downward and unplugging it from the port.
  3. Plug the new LED light strip into the port and tuck it into the housing.
  4. Replace the light cover by inserting the two tabs on the top of the light cover into the slots at the top of the housing and pressing the bottom tab inward until it clicks into place.

Note: Contact consumer care for information regarding receiving or purchasing a new LED light strip based on warranty eligibility.

Temperature scale: 2°C, 4°C, 5°C, 6°C, 8°C with checkboxes; corresponding Fahrenheit: 36°F, 39°F, 41°F, 43°F, 46°F. Plus and minus signs indicate adjustment.

MIN and MAX labels.

DANBY DFF100C2WDD - INTERIOR LIGHT - 3

OPERATING INSTRUCTIONS

DOOR REVERSAL INSTRUCTIONS

If the appliance is placed on its back or side for any length of time during this process, it must be allowed to remain upright for 6 hours before plugging it in to avoid damage to the internal components.

  1. Remove the hinge cover and the upper hinge. Remove the hinge hole covers from the top left side of the cabinet. Remove the freezer door from the cabinet.
  2. Remove the screws from the center hinge. Remove the center hinge, the center hinge spacer and the refrigerator door.
  3. Move the bushing from the top right side to the top left side of the refrigerator door.
  4. Remove the right door stop from the bottom of the refrigerator door.
  5. Remove the lower hinge from the right side of the cabinet, then install the lower hinge on the left side of the cabinet.
  6. Get the left door stop from the accessory bag, install it on the bottom left side of the refrigerator door.
  7. Remove the center hinge screw hole plugs and install them in the screw holes on the right side of the cabinet.
  8. Install the refrigerator door. Install the center hinge. Ensure that the center hinge spacer is installed with the center hinge as the spacer is necessary to allow the doors to have full range of motion. Get the left upper door stop from the accessory bag, install it on the bottom left side of the freezer door.
  9. Install the freezer door. Install the upper hinge and hinge cover on the top left side of the cabinet. Before tightening the screws on the upper hinge, ensure that the top of the door is level with the cabinet and that the rubber gasket is making a good seal. Install the screw hole covers on the top right side of the cabinet.

A. Hinge Cover B. Screws C. Upper Hinge D. Hinge Hole Cover E. Center Hinge Spacer F. Center Hinge G. Door Bushing H. Right Door Stop I. Lower Hinge J. Left Door Stop K. Screw Hole Cover

DANBY DFF100C2WDD - DOOR REVERSAL INSTRUCTIONS - 1

CARE & MAINTENANCE

CLEANING

Ensure the appliance is unplugged before cleaning.

  • To clean the inside of the appliance, use a soft cloth and a solution of a tablespoon of baking soda to one quart of water or a mild soap solution or some mild detergent.
  • Wash removable shelves in a mild detergent solution, then dry and wipe with a soft cloth.
  • Clean the outside with a soft, damp cloth and some mild detergent.
  • It is important to keep the area clean where the door seals against the cabinet. Clean this area with a soapy cloth. Rinse with a damp cloth and let dry.

Note: Do not use cleaners containing ammonia or alcohol on the appliance. Ammonia or alcohol can damage the appearance of the appliance. Never use any commercial or abrasive cleaners or sharp objects on any part of the appliance.

POWER FAILURE

Most power failures are corrected within a few hours and should not affect the temperature of the appliance if the door is only opened when absolutely necessary. If the power is going to be off for a longer period of time, take the proper steps to protect the contents.

Note: Wait 3 to 5 minutes before attempting to restart the refrigerator if operation has been interrupted.

DEFROSTING

This appliance is equipped with an automatic defrost function and does not require manual defrosting. Defrost water from the appliance is channeled into a drip tray located above the compressor. Heat transfer from the compressor causes the defrost water to evaporate.

ENERGY SAVING TIP

The appliance should be located in the coolest area of the room, away from heat producing appliances, and out of direct sunlight. Do not overload the appliance or block any ventilation openings.

VACATION

  • Short vacations: Leave the appliance operating during vacations of less than three weeks.
  • Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.

MOVING

  • Remove all contents.
  • Securely tape down the shelves inside the appliance.
  • Turn the adjustable legs up to avoid damage.
  • Tape the door shut.
  • Be sure the appliance stays in the upright position during transportation. Protect the outside of the appliance with a blanket.
  • If the appliance is placed on its back or side during transportation, upon reaching the destination, allow it to remain upright for 6 hours before plugging in to avoid damage to internal components.

DISPOSAL

This appliance may not be treated as regular household waste, it should be taken to the appropriate waste collection point for recycling of electrical components. For information on local waste collection points, contact your local waste removal agency or government office.

TROUBLESHOOTING

Danby Consumer Care: 1-800-263-2629

Hours of operation:

Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time

Friday 8:30 am - 4:00 pm Eastern Standard Time

Information in this manual is subject to change without notice.

PROBLEM POSSIBLE CAUSE
No power • A fuse may be blown or the circuit breaker tripped• Plug not fully inserted into the wall outlet
Internal temperature not cold enough • Temperature setting is too warm• Door is not shut properly or opened excessively• Recently added a large quantity of warm food to the cabinet• Close proximity to heat source or direct sunlight• Ambient temperature or humidity is very high
Appliance runs continuously • Temperature setting is too cold• Door is not shut properly or opened excessively• Recently added a large quantity of warm food to the cabinet• Close proximity to heat source or direct sunlight• Ambient temperature or humidity is very high
Internal temperature is too cold • Temperature setting is too cold
Noises • Parts are expanding or the refrigerant is circulating; this is normal

LIMITED "IN HOME" WARRANTY

This quality product is warranted to be free from manufacturer's defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer.

This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter "Danby") or by an authorized distributor of Danby, and is non-transferable.

TERMS OF WARRANTY

Plastic parts are warranted for thirty (30) days from the date of purchase, with no extensions provided.

First 18 months During the first eighteen (18) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor's option, at no charge to the original purchaser.

To obtain service Contact the dealer where the unit was purchased, or contact the nearest authorized Danby service depot, where service must be performed by a qualified service technician. If service is performed on the unit by anyone other than an authorized service depot, all obligations of Danby under this warranty shall be void.

Boundaries of in-home service Danby reserves the right to limit the boundaries of "In Home Service" to the proximity of an authorized service depot. Any appliance requiring service outside the limited boundaries of "In Home Service", will be the consumer's responsibility to transport at their own expense to the original point of purchase or a service depot for repair. If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center, it must be delivered to the nearest authorized Danby Service Depot by the purchaser.

Transportation charges to and from the service location are not protected by this warranty and are the responsibility of the purchaser.

Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, by Danby, there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by Danby or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statute is hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or property caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

1) Power failure. 2) Damage in transit or when moving the appliance. 3) Improper power supply such as low voltage, defective house wiring or inadequate fuses. 4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions (i.e. extremely high or low room temperature). 5) Use for commercial or industrial purposes (i.e. If the appliance is not installed in a domestic residence). 6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc. 7) Service calls resulting in customer education. 8) Improper Installation (i.e. Building-in of a free standing appliance or using an appliance outdoors that is not approved for outdoor application, including but not limited to: garages, patios, porches or anywhere that is not properly insulated or climate controlled).

Proof of purchase date will be required for warranty claims; retain bills of sale. In the event that warranty service is required, present the proof of purchase to our authorized service depot.

Warranty Service

In Home

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

Telephone: (519) 837-0920 FAX: (519) 837-0449

1-800-263-2629

04/17

Danby Products Inc

PO Box 669, Findlay, Ohio, U.S.A. 45840

Telephone: (419) 425-8627 FAX: (419) 425-8629

Welcome

1-800-26-Danby (1-800-263-2629)

Diagram of a refrigerator interior with numbered compartments and labeled parts.

LEVEL INSTRUCTIONS

1-800-26-Danby (1-800-263-2629)

Diagram of a refrigerator interior with numbered compartments and labeled parts.

Labels E, F, B, G.

Simple line drawing of a mechanical component with a circular symbol labeled 'G' and an arrow pointing to it.

Labels H and B.

Diagram showing a door with a control panel and labeled parts I and B, indicating a mechanical or electrical system.

6Labels J and B.

Diagram showing a particle entering a medium with a labeled mass K and directional arrow, likely illustrating a physics or optics concept.

E F G B

A B C D

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

Telephone: (519) 837-0920 FAX: (519) 837-0449

1-800-263-2629

04/17

Danby Products Inc.

PO Box 669, Findlay, Ohio, U.S.A. 45840

Telephone: (419) 425-8627 FAX: (419) 425-8629

NOTES / REMARQUES / NOTAS :

NOTES / REMARQUES / NOTAS :

MODEL • MODÈLE • MODELO

DFF100C1BDD

DFF100C1BSSDD

DFF100C2WDD

DFF100C2BSLDD

DFF100C2BSSDD

DFF123C2WDD

DFF123C2BSSDD

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : DANBY

Model : DFF100C2WDD

Category : Freezer