Pro Diver 28763 - Watch INVICTA - Free user manual and instructions
Find the device manual for free Pro Diver 28763 INVICTA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Watch |
| Brand | Invicta |
| Model | Pro Diver 28763 |
| Movement | Japanese Quartz (TMI Caliber NH35A or similar) |
| Case Diameter | 45 mm |
| Case Thickness | 14 mm |
| Band Width | 22 mm |
| Band Length | Fits up to 8.5 inch wrist |
| Weight | 190 grams |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel |
| Crystal | Mineral Crystal |
| Bezel | Unidirectional Rotating, 120 Clicks |
| Crown | Screw-down Crown |
| Water Resistance | 200 meters (660 feet) |
| Functions | Hours, Minutes, Seconds, Date Window at 3 o'clock |
| Dial Color | Black with Luminous Hands and Markers |
| Clasp | Fold-over Clasp with Safety |
| Battery Type | SR920SW or equivalent |
| Battery Life | Approximately 2-3 years |
| Warranty | 1 Year International |
| Maintenance | Rinse with fresh water after saltwater use; avoid extreme temperatures |
Frequently Asked Questions - Pro Diver 28763 INVICTA
How do I set the date on my Invicta Pro Diver 28763?
Pull the crown out to the first position and rotate clockwise to set the date. For quick date change, rotate the crown continuously until the correct date appears.
Is the Invicta Pro Diver 28763 suitable for scuba diving?
Yes, it has a water resistance rating of 200 meters (660 feet), which is suitable for scuba diving. However, ensure the crown is fully screwed down before submersion.
How do I replace the battery in my watch?
Battery replacement should be done by a professional watchmaker. The watch uses a SR920SW battery. Opening the case back may require special tools and can affect water resistance.
What should I do if my watch stops running?
First, check if the crown is fully pushed in and screwed down. If the watch still doesn't run, try a gentle shake to start the movement. If it persists, the battery may be dead or the movement may need servicing.
Can I swim with my Invicta Pro Diver 28763?
Yes, you can swim with this watch as it is water resistant to 200 meters. However, avoid pressing buttons or turning the crown while underwater. Rinse with fresh water after swimming in saltwater or chlorinated pools.
How do I adjust the bracelet size?
The stainless steel bracelet has removable links. You can remove links using a pin pusher tool or small screwdriver. Typically, links are secured with split pins or screws. Refer to the manual or visit a jeweler for assistance.
What is the bezel used for?
The unidirectional rotating bezel is used to track elapsed time underwater. Align the triangular marker with the minute hand, then read the bezel marking against the minute hand to see how many minutes have passed.
How do I care for my watch strap?
For stainless steel straps, clean with a soft cloth and mild soapy water. Dry thoroughly. Avoid exposure to chemicals and magnetic fields. For longevity, periodically check links and clasp for wear.
What does the screw-down crown do?
The screw-down crown locks into place to provide a watertight seal. Before water exposure, ensure the crown is fully tightened. To set time or date, unscrew the crown counterclockwise to release, then pull to the desired position.
Why is my watch running fast or slow?
Quartz watches are highly accurate. If the watch runs significantly off, the battery may be low, or the movement may have been magnetized. A watchmaker can demagnetize the movement. If the battery is old, replace it.
User questions about Pro Diver 28763 INVICTA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Watch in PDF format for free! Find your manual Pro Diver 28763 - INVICTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pro Diver 28763 by INVICTA.