DFP52 - Toy Fisher Price - Free user manual and instructions

Product Type	Toy vehicle with sound effects and music
Manufacturer	Fisher-Price (Mattel)
Model	DFP52
Power Source	3 button cell LR44 alkaline batteries (included)
Functions	Press buttons to activate car sound effects and music
Battery Installation	Requires Phillips screwdriver (not included); loosen screw, remove door, insert batteries, replace door and tighten
Battery Replacement	When sounds become faint or stop, replace with new LR44 batteries
Battery Safety	Do not mix old/new or different battery types; remove batteries during long periods of non-use; dispose of exhausted batteries safely
Electronic Reset	Remove and reinstall batteries if toy operates erratically
Care Instructions	Wipe with clean, damp cloth; do not immerse in water
Disassembly	No consumer serviceable parts; do not take apart
Regulatory Compliance	FCC Part 15, CAN ICES-3 (B)/NMB-3(B); operation subject to no interference conditions
Disposal	Do not dispose with household waste; recycle according to local regulations (2012/19/EU)
Battery Type Notes	Alkaline recommended for longer life; do not charge non-rechargeable batteries; rechargeable only under adult supervision
Printing Location	Printed in China

Frequently Asked Questions - DFP52 Fisher Price

What type of batteries does the Fisher-Price DFP52 require?

The toy requires three button cell LR44 alkaline batteries. They are included in the package.

How do I replace the batteries?

Use a Phillips screwdriver (not included) to loosen the screw on the battery compartment door. Remove the door, take out exhausted batteries, insert three new LR44 batteries as shown, replace the door, and tighten the screw. Do not over-tighten.

What should I do if the toy stops making sounds?

If sounds become faint or stop, it is time to replace the batteries. If the toy operates erratically, remove and reinstall the batteries to reset the electronics.

Can I use rechargeable batteries in this toy?

Yes, but only if they are the same type (LR44 rechargeable). Remove them from the toy before charging, and charging must be done under adult supervision. Do not charge non-rechargeable batteries.

How should I clean the Fisher-Price DFP52?

Wipe the toy with a clean, damp cloth. Do not immerse it in water.

Is the toy safe for babies and toddlers?

The toy includes small parts like batteries and requires adult supervision during battery installation. The instructions indicate it is a toy; typical age recommendation is for children 12 months and up, but always use common sense and check for small parts.

What does FCC compliance mean for this toy?

The device complies with FCC Part 15 and CAN ICES-3 (B)/NMB-3(B), meaning it is designed to prevent harmful interference to radio communications and must accept any interference received. Modifications could void the user's authority to operate it.

How should I dispose of the toy or its batteries?

Do not dispose of the product with household waste. Follow local recycling regulations for electronic waste. Dispose of exhausted batteries safely; they may leak if mishandled.

Can I leave the batteries in the toy when not in use?

It is recommended to remove batteries during long periods of non-use to prevent leakage that could damage the toy.

What if the toy gets wet?

Do not immerse the toy. If it gets damp, wipe it with a dry cloth immediately. Do not attempt to dry with heat.

USER MANUAL DFP52 Fisher Price

©2015 Mattel. All Rights Reserved.

PRINTED IN CHINA

DFP52-0970-1100692315-DOM

Consumer Information

• Keep these instructions for future reference, as they contain important information.
• Requires three button cell (LR44) batteries (included) for operation.
• Battery replacement is required. Only adults should install batteries.
• Tool required: Phillips screwdriver (not included).

Press the buttons for car sound effects and music!

Battery Replacement

• Loosen the screws in the battery compartment door with a Phillips screwdriver and remove the door.
• Remove the exhausted batteries and dispose of them properly.
• Insert three, new button cell (LR44) alkaline batteries.

Hint: We recommend using alkaline batteries for longer battery life.

- Replace the battery compartment door and tighten the screws. Do not over-tighten.

• When sounds from this toy become faint or stop, it is time for an adult to change the batteries!
• If this toy begins to operate erratically, you may need to reset the electronics. Remove and reinstall the batteries.

- Protect the environment by not disposing of this product with household waste (2012/19/EU). Check your local authority for recycling advice and facilities.

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.

• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

Care

• Wipe this toy with a clean, damp cloth. Do not immerse.
• This toy has no consumer serviceable parts. Do not take apart.

CAN ICES-3 (B)/NMB-3 (B)

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.