CSB7 - Car speaker CALIBER - Free user manual and instructions

Product Type	Coaxial Car Speaker
Brand	Caliber
Model	CSB7
Woofer Size	6.5 inches (165 mm)
Tweeter Type	Piezo or Soft Dome
Peak Power Handling	120 W
RMS Power Handling	60 W
Impedance	4 ohms
Sensitivity	90 dB
Frequency Response	50 Hz – 20 kHz
Mounting Depth	55 mm
Mounting Hole Diameter	145 mm
Material	Polypropylene Cone, Rubber Surround
Weight	0.7 kg (per speaker)
Power Supply	12 V (car battery)
Compliance	RoHS Directive 2011/65/EU
Installation Notes	Do not use recessed screws; avoid touching flexible wire; do not change terminal direction; ensure terminals do not contact metal.
Maintenance	Clean with dry cloth; avoid moisture and direct sunlight.
Warranty	1 year
Included Accessories	Mounting screws, wire connectors, instruction manual

Frequently Asked Questions - CSB7 CALIBER

What size is the Caliber CSB7 speaker?

The Caliber CSB7 is a 6.5-inch (165 mm) coaxial car speaker.

What is the power handling of the CSB7?

The CSB7 has a peak power handling of 120 W and an RMS rating of 60 W.

What is the impedance of this speaker?

The impedance is 4 ohms, which is standard for most car audio systems.

Can I install the CSB7 in my car?

Yes, if you have a standard 6.5-inch speaker opening. Check the mounting depth (55 mm) and hole diameter (145 mm) to ensure fit.

Does the CSB7 come with a tweeter?

Yes, it is a coaxial speaker with an integrated tweeter for full-range sound.

What should I avoid during installation?

Do not use recessed screws, do not touch the speaker flexible wire, do not change the direction of the terminals, and ensure leads and terminals do not contact metal.

Is the CSB7 compatible with any car stereo?

It should work with any standard car stereo, but always refer to your stereo's manual for proper connections.

How do I clean the CSB7 speaker?

Use a soft, dry cloth to wipe the surface. Avoid water or harsh chemicals.

What is the frequency response of the CSB7?

The frequency response ranges from 50 Hz to 20 kHz, covering bass to high treble.

Is the Caliber CSB7 RoHS compliant?

Yes, it is compliant with the RoHS Directive 2011/65/EU, ensuring no hazardous substances.

USER MANUAL CSB7 CALIBER

CSB 7

MOUNTING INSTRUCTIONS

Do not use recessed screws

GB Caliber hereby declares that the item CSB7 is in compliance with the essential requirements and other relevant provisions of Directive 2011/65/EU (RoHS).

• Do not touch the speaker flexible wire.
• Do not change the direction of the speakers terminals assembly.
• Make sure lead and speaker terminals do not contact metal.
• When making connections, refer also the instruction manual of the car stereo used.

Attention!