SPP85P30100DAEA - Uncategorized Skylane Optics - Free user manual and instructions
Find the device manual for free SPP85P30100DAEA Skylane Optics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 10 Gigabit SFP+ Optical Transceiver |
| Brand | Skylane Optics |
| Model | SPP85P30100DAEA |
| Form Factor | SFP+ (Small Form-factor Pluggable Plus) |
| Connector Type | LC Duplex |
| Wavelength | 850 nm |
| Data Rate | 10.3125 Gbps |
| Maximum Reach | Up to 300 m on OM3 Multimode Fiber |
| Power Consumption | < 1.0 W |
| Operating Temperature Range | 0°C to 70°C (Commercial) |
| Digital Diagnostic Monitoring (DDM) | Yes, compliant with SFF-8472 |
| Compatibility | MSA Compliant, interoperable with major switch brands |
| Dimensions (Approx.) | 56.5 x 13.4 x 8.5 mm |
| Weight (Approx.) | 20 g |
| Power Supply | 3.3 V DC (via host device) |
| Main Functions | Transmit and receive high-speed optical signals, hot-pluggable, DDM |
| Maintenance and Cleaning | Clean optical connectors with lint-free wipes and isopropyl alcohol; inspect with fiber microscope |
| Safety | Class 1 Laser Product (IEC 60825-1) |
| Spare Parts and Repairability | Not repairable; replace entire module if faulty |
| Application | Data center, enterprise networking, storage area networks |
Frequently Asked Questions - SPP85P30100DAEA Skylane Optics
What is the Skylane Optics SPP85P30100DAEA module used for?
It is a 10 Gigabit SFP+ optical transceiver used for high-speed data transmission over multimode fiber in data centers and enterprise networks.
What is the maximum distance supported?
Up to 300 meters on OM3 multimode fiber. Actual distance may vary with fiber type and quality.
Does this module support Digital Diagnostic Monitoring (DDM)?
Yes, it supports DDM functions per SFF-8472, providing real-time monitoring of temperature, voltage, bias current, and optical power.
Is the SPP85P30100DAEA compatible with all switches?
It is MSA compliant and compatible with most SFP+ ports. However, some vendors may require specific firmware or coding. Check your device's compatibility list.
What type of fiber cable should I use?
Use multimode fiber (OM3 or OM4) with LC duplex connectors. Single-mode fiber is not suitable for 850nm transceivers.
How do I clean the optical connectors?
Use a fiber optic cleaning kit with lint-free wipes and isopropyl alcohol. Always inspect with a microscope before mating.
What is the power consumption of this module?
Typical power consumption is less than 1.0 watt, making it energy-efficient.
Can I use this module in hot-swap applications?
Yes, it is hot-pluggable and can be inserted or removed without powering down the host device.
What safety class does this transceiver have?
It is a Class 1 Laser Product under IEC 60825-1, safe under normal operating conditions. Avoid direct eye exposure.
How do I troubleshoot if the module is not detected?
Check that the module is fully inserted, clean the connectors, verify compatibility, and ensure the host port is enabled. Use diagnostic commands or status LEDs.
User questions about SPP85P30100DAEA Skylane Optics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SPP85P30100DAEA - Skylane Optics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPP85P30100DAEA by Skylane Optics.