ioLogik R1241-T - Industrial controller Moxa - Free user manual and instructions
Find the device manual for free ioLogik R1241-T Moxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Remote I/O Controller |
| Brand | Moxa |
| Model | ioLogik R1241-T |
| Category | Industrial Automation |
| Dimensions (W x H x D) | 100 x 112 x 65 mm |
| Weight | 200 g |
| Power Supply | 24 VDC (12-36 VDC) |
| Power Consumption | 4 W max |
| Operating Temperature | -40 to 75°C |
| Analog Inputs | 8 channels, 4-20 mA or 0-10 V |
| Digital Inputs | 2 channels, dry contact |
| Digital Outputs | 2 channels, sink/source |
| Relay Outputs | 2 channels, Form A (NO) |
| Communication Interface | Ethernet (10/100Base-TX) |
| Supported Protocols | Modbus/TCP, SNMP, HTTP, TCP/IP |
| Ingress Protection | IP30 |
| Mounting | DIN-rail or wall mount |
| Configuration | Web-based, Windows utility |
| Safety Compliance | CE, UL 508 |
| EMC | EN 55022, EN 55024 |
| Maintenance | Routine visual inspection; keep dry and dust-free |
Frequently Asked Questions - ioLogik R1241-T Moxa
How do I configure the IP address of the ioLogik R1241-T?
Use the Moxa ioLogik Configuration Tool (Windows) or access the web interface via the default IP 192.168.127.254. Connect via Ethernet and assign a static IP in the same subnet.
What is the default username and password?
The default username is admin and the password is admin. It is recommended to change the password after first login.
How do I connect the analog inputs?
Connect 2-wire transmitters to the AI+ and AI- terminals. For 4-20 mA, set the DIP switch to current mode. Each channel can be configured as 4-20 mA or 0-10 V via software.
What do the LEDs indicate?
The PWR LED indicates power (green solid). Ready LED blinks when ready. Ethernet LEDs show link/activity. DI/DO LEDs reflect input/output states.
Can the ioLogik R1241-T be used in outdoor environments?
It has an IP30 rating, so it is not water-resistant. Use an enclosure if installed outdoors. The operating temperature range is -40 to 75°C, suitable for harsh industrial environments.
How do I reset the device to factory defaults?
Press and hold the Reset button (located near the Ethernet port) for 5 seconds until the Ready LED blinks rapidly. The device will reboot with default settings.
Which protocols are supported?
It supports Modbus/TCP, SNMPv1/v2c, HTTP, and TCP/IP. It can also be polled using Moxa's proprietary protocol or OPC (via Moxa Utility).
What is the maximum distance for analog input wiring?
For best accuracy, keep analog input wiring under 100 meters (328 ft). Use shielded twisted-pair cable and avoid running near high-voltage lines.
How many devices can be daisy-chained?
This model does not support daisy-chaining via Ethernet. Each unit must be individually connected to the network switch. However, you can use a switch to connect multiple ioLogik units.
Where can I download the user manual and software?
Download the manual and utility from Moxa's official website: www.moxa.com. Search for 'ioLogik R1241-T' to find product page with documents.
User questions about ioLogik R1241-T Moxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial controller in PDF format for free! Find your manual ioLogik R1241-T - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ioLogik R1241-T by Moxa.