Pyle PSAC4G - Video camera

PSAC4G - Video camera Pyle - Free user manual and instructions

Find the device manual for free PSAC4G Pyle in PDF.

📄 5 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Pyle PSAC4G - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Waterproof MP3/DSC/DVR Device (Action Camera)
Brand Pyle
Model PSAC4G
Category Sport Video Camera / MP3 Player
Night Vision High quality night vision camera lens
Water Resistance Waterproof (with waterproof earphone, suitable for swimming)
Mounting Options Bicycle handlebar, clip holder for clothing, swimming goggle
Audio Output 2.5mm earphone jack
Included Accessories Multi-directional clip holder, bicycle handlebar bracket, bicycle holder, USB charger cable, waterproof earphone, sport earphone, waterproof earplug set, neoprene armband
Power Source Rechargeable battery via USB (charge min 3 hours)
Charging Time Minimum 3 hours
Music Transfer Drag and drop via USB (appears as removable drive)
Modes MP3 player, Digital Still Camera (DSC), Digital Video Recorder (DVR)
Controls Key switch, M button (mode), volume +/-, reset switch
Auto Power-Off Automatically turns off after 5 minutes of inactivity in DSC/DVR mode
Reset Function Yes, via paper clip on reset switch
LED Indicators Blue and red LEDs for power, mode, and recording status

Frequently Asked Questions - PSAC4G Pyle

How do I charge the PSAC4G?
Insert the USB cable into the audio jack and connect to a PC. Charge for at least 3 hours until the lights turn off.
How do I transfer music to the device?
Connect the device to a PC via USB. It will appear as a removable drive. Drag and drop music files, then right-click and select 'eject' before unplugging.
How do I mount the camera to my bicycle?
Attach the bicycle handlebar bracket to the handlebar and tighten. Slide the PSAC4G into the bicycle holder (aligning the raised point with hole k). Then slide the holder onto the bracket until it clicks. Adjust angle as needed.
Can I use the camera underwater?
Yes, the PSAC4G is waterproof when used with the included waterproof earphone. Attach it to your swimming goggles using the clip holder for underwater use.
How do I switch between MP3, camera, and video modes?
Press and hold the M button for 2 seconds to cycle through modes: MP3 → DSC (camera) → DVR (video) → back to MP3.
How do I take a photo or start recording?
In DSC mode, press any button to take a photo. In DVR mode, press any button to start recording; press again to stop.
How do I adjust the volume?
While playing music, press and hold the + or - buttons to increase or decrease volume.
What should I do if the device freezes?
Use a paper clip to press the reset switch (labeled f in the diagram). The system will reset and turn off.
What earphones are included?
The package includes a waterproof earphone for swimming, a sport earphone with volume control (non-waterproof), and a waterproof earplug set.
How long does the battery last?
The battery provides several hours of continuous use (e.g., music playback). A full charge takes at least 3 hours.

User questions about PSAC4G Pyle

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Video camera in PDF format for free! Find your manual PSAC4G - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSAC4G by Pyle.

USER MANUAL PSAC4G Pyle

natural_image Technical line drawing of a mechanical device with no visible text or symbols

User manual

PSAC4G

Welcome to the world of PYLE Sports where style and personal audio pleasure intertwine!

PSAC4G, PYLE Sports possesses a high quality of NightVision level of camera lens which can allow you to enjoy fun moment of your action or sport as well as music, photo under water, on the ground or on a bike tour.

Please read carefully the following instructions before use.

Box contents

  1. PYLE Sports, PSAC4G MP3/DSC/DVR device
  2. Multi-directional clip holder
  3. Bicycle handle bar bracket
  4. Bicycle holder
  5. USB charger cable
  6. Waterproof earphone
  7. Sport type Hifi earphone with volume control (non waterproof)
  8. Waterproof earplug set
  9. Neoprene amband

Product diagram

a. Camera lens
b. Key switch
c. Bicycle holder
d. Bicycle holder release lever
e. Bicycle handlebar bracket
f. Reset switch
g. Microphone
h. 2.5 mm earphone jack
I. Multi-directional clip holder
j. Clip holder Insert hole
k. Bicycle holder insert hole
1. Clip holder insert hole

a. waterproof) b. c. d. e.

f. g h. l.

Technical diagram of a cylindrical device with labeled parts and mounting points

OPERATIONAL INSTRUCTIONS

Mounting to your bicycle

  1. Clip on bicycle handlebar bracket and turn screw until tightly secure.
  2. Slide PSAC4G into bicycle holder. Be note that a raised point on the dip holder must go into the hole (hole k.) on the PSAC4G.
  3. Slide bicycle holder onto bicycle handlebar bracket until it clicks into place.
  4. Adjust angle by turning bicycle holder as required.
    5 Press key switch button to activate MP3/DSC/DVR.
    6 Use normal earphone and insert into the audio jack hole (h.) If listening MP3 is needed.
  5. To remove, press bicycle holder release lever and slide forward to detach from the bicycle handlebar bracket.

Attaching to your swimming goggle

  1. Align the PSAC4G to the hole on the unit and it clicks into place. Be note that a raised point on the clip holder must go into the hole. (hole j. or l. depends on the left or right side you choose to clip.)
  2. Clip the PSAC4G to your swimming goggle.
  3. Press key switch button to activate MP3/DSC/DVR.
  4. Use waterproof earphone and insert into the audio jack hole (h.) if listening MP3 is needed.
  5. Adjust angle by turning clip holder as required.

Wearing on your cloth on the go

  1. Align the PSAC4G to the hole on the unit and it clicks into place. Be note that a raised point on the clip holder must go into the hole. (hole j. or l. depends on the left or right side you choose to clip.)
  2. Clip the PSAC4G to your clothesleeve or collaret or waist band.
  3. Press key switch button to activate MP3/DSC/DVR.

  4. Use normal earphone and insert into the audio jack hole (h.) If listening MP3 is needed.

  5. Adjust angle by turning clip holder as required.

Charging and Music Transfer

Audio jack hole (h.) USB PC

  1. When charging PSAC4G, Insert the USB cable into audio jack hole (h.) and connect it to the PC USB port. It is recommended that you leave your MP3 player to charge for minimum of 3 hours (blue & red light will flash during recharging). Check when fully recharged, lights will turn off to ensure optimum battery life.

Transferring music to your PSAC4G

  1. Insert the USB cable into audio jack hole (h.) and connect it to a PC.
  2. The PSAC4G player will appear as a removable drive in 'My Computer'.
  3. Select the music files you want to simply drag and drop them onto the PSAC4G player.
  4. When you are finished transferring music, right-click on the PSAC4G player's icon and select 'eject'.
  5. It is then safe to unplug.

How to operate

MP3 mode

1) To switch the PSAC4G player on, press the button for two seconds till red & blue light goes on, and MP3 music will start playing.
2) To switch the PSAC4G player off, press the button for two seconds till red & blue light goes off.
3) While playing music, the blue light will keep flashing, and red light will keep off.
4) While playing music, tapping the ⊕ or ⊖ buttons once will sidp a track or replay the previous one.
5] While playing music, press and hold the + ion - buttons to adjust the volume.
6) To make PSAC4G pause while music is playing, short tap to pause song play. Blue light will start from stable flash and become quick flash, the red light will still keep off. Short tap again to continue playing. Blue light will return to stable flash, and red light will keep off. DSC mode
7) While in MP3 mode, hold M button down for 2 seconds to change to DSC mode. Blue light will stop and red light will be entire on.
8) While In DSC mode, blue light will be off, and red light will be entire on. When pressing any button to take a single photo, blue light will be entire on, and red light will be off.
9) The light will resume to blue light off and red light on once the photo taking is finished.

DVR mode

10) While in DSC mode, hold M button down for 2 seconds to change to DVR mode. Blue and red light will be entire on.
11) White in DVR mode, pressing any button will begin filming. Blue light will be entire on and red light will be flashing.
12) While filming, pressing any button will stop the recording. Blue and red light will be entire on.
13) While in DVR mode, hold M button down for 2 seconds to change to MP3 mode. MP3 will begin playing music. Blue light is from entire on to flask, red light will keep off.

Be note, under DSC and DVR mode, the system will be turn off in 5 mins when no key activation is detected.

Reset system

14) Use paper clip or the like and insert into reset switch until system resets, system will turn off.

Light vs. Function table

BR
Power on (2 secs only)
MP3 mode and playing
DSC mode and playing
DSC shooting
DVR mode and waiting
DVR filming
Power off

Blue light=B

Red light=R

Light on=

Light off=

Flashing=

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Pyle

Model : PSAC4G

Category : Video camera