AWK-6222-EU-T - Wi-Fi repeater Moxa - Free user manual and instructions
Find the device manual for free AWK-6222-EU-T Moxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Wi-Fi Repeater / Access Point |
| Brand | Moxa |
| Model | AWK-6222-EU-T |
| Wireless Standards | IEEE 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Max Data Rate | 300 Mbps (2.4 GHz) + 300 Mbps (5 GHz) |
| Antenna | 2 x RP-SMA connectors (external antennas included) |
| Power Input | 12 to 48 VDC (terminal block) or PoE (802.3af/at) |
| Power Consumption | 12 W max |
| Dimensions | 150 x 100 x 50 mm |
| Weight | 500 g |
| Mounting | DIN-rail, wall, or pole |
| Enclosure Rating | IP30 |
| Operating Temperature | -40 to 75°C |
| Storage Temperature | -40 to 85°C |
| Operating Humidity | 5% to 95% (non-condensing) |
| Wireless Security | WEP, WPA/WPA2-PSK, 802.1X |
| Management | Web GUI, CLI, SNMP, Moxa AeroGuard |
| Maintenance | Clean with a dry cloth; no liquids |
| Safety Certifications | CE, FCC, UL (varies by model) |
Frequently Asked Questions - AWK-6222-EU-T Moxa
What is the default IP address of the AWK-6222?
The default IP address is 192.168.126.254 for the LAN port, and the default subnet mask is 255.255.255.0.
How do I reset the device to factory defaults?
Press and hold the Reset button on the device for at least 5 seconds while power is applied. The device will reboot with factory settings.
Can the AWK-6222 be used as a Wi-Fi repeater?
Yes, it supports WDS (Wireless Distribution System) mode, allowing it to act as a repeater to extend the range of an existing Wi-Fi network.
What power supply options are available?
The device can be powered via a 12-48 VDC terminal block or through PoE (Power over Ethernet) compliant with IEEE 802.3af/at.
Does the AWK-6222 support dual-band simultaneous operation?
Yes, it can operate on both 2.4 GHz and 5 GHz bands simultaneously, providing combined throughput of up to 600 Mbps.
What is the maximum number of client connections?
The device can support up to 32 simultaneous wireless clients per radio, but performance may vary based on environment and configuration.
Is the device suitable for outdoor use?
The AWK-6222 has an IP30 rating, which means it is protected against dust but not against water. It is intended for indoor or sheltered outdoor use unless placed in a weatherproof enclosure.
How can I update the firmware?
Firmware updates can be applied via the web interface under System Maintenance > Firmware Upgrade. Download the latest firmware from the Moxa website.
Does the device support mesh networking?
Yes, with Moxa AeroGuard technology, the AWK-6222 can form a self-healing mesh network for extended coverage and redundancy.
What certifications does this model have?
The -EU-T suffix indicates European compliance with CE marking and possibly ATEX for hazardous locations (check specific variant). It also meets FCC for USA.
User questions about AWK-6222-EU-T Moxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual AWK-6222-EU-T - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AWK-6222-EU-T by Moxa.