Beta XP Ten - Audio crossover INFINITY - Free user manual and instructions

Product Type	Vacuum Cleaner
Brand	Infinity
Model	Beta XP Ten
Dimensions (cm)	30 x 25 x 20
Weight (kg)	4.2
Power (W)	1200
Cord Length (m)	5
Dust Capacity (L)	1.5
Filtration	HEPA
Noise Level (dB)	75
Bagless	Yes
Color	Silver
Material	Plastic
Suction Control	Adjustable
Main Functions	Dry vacuuming, HEPA filtration
Care Instructions	Empty container after each use; wash filter monthly
Safety Precautions	Do not vacuum wet surfaces; keep away from water and children
Spare Parts Available	Replacement HEPA filter, brush roll
Repairability	User-serviceable parts: filter and brush roll
Warranty	2 years

Frequently Asked Questions - Beta XP Ten INFINITY

How do I start the vacuum cleaner?

Plug the cord into an outlet and press the power button on the handle.

How do I change the filter?

Open the filter cover, remove the old HEPA filter, and insert a new one. Ensure it is seated properly.

What should I do if suction power decreases?

Check the dust container for fullness and empty it. Also clean the filter and inspect the brush roll for blockages.

Can I use the vacuum without a bag?

Yes, this model is bagless. The dust container collects debris directly.

How do I clean the brush roll?

Turn off and unplug the vacuum. Remove the brush roll cover, cut away any hair or threads, and wipe with a damp cloth.

Is it safe on hardwood floors?

Yes, the adjustable suction and soft brush roll make it safe for hardwood. Use the appropriate setting.

How often should I replace the HEPA filter?

Replace the HEPA filter every 6 to 12 months depending on usage.

What is the warranty period?

The vacuum comes with a 2-year warranty against manufacturing defects.

Where can I buy spare parts?

Genuine spare parts like HEPA filters and brush rolls are available on the Infinity website or authorized retailers.

How should I store the vacuum?

Store the vacuum in a dry place. Wrap the cord around the cord hooks and keep it upright.

USER MANUAL Beta XP Ten INFINITY

Thank you for purchasing an Infinity Beta XP One or Ten 2-Way Passive Crossover. The Beta XP One lets you fine-tune the highs, precisely directing power between your choice of the Beta Four, Five, or Six midrange speaker and a Beta One tweeter. The Beta XP Ten provides the same functionally, except you'd use a Kappa 10t tweeter instead.

Both models feature a sophisticated Linkwitz-Riley 4th-order acoustic design with near-perfect phase characteristics and steep, 24 dB per octave, filter slopes for cleanly-defined sound. What's more, with their transparent case design, quality components, and black-and-gold circuit design, these Beta crossovers look as great as they sound. They even feature gold-plated terminals for rock-solid signal transfer.

Each Infinity Beta XP One/Ten crossover is covered by our limited parts and labor warranty (see the enclosed warranty card). Keep your original dated bill of sale in case warranty service is required. For a detailed warranty statement, contact Customer Service at the address below.

IMPORTANT: Installation of automotive stereo components can require extensive experience in dealing with a variety of mechanical and electrical procedures. Although these instructions explain how to install a Beta XP One or Ten crossover in a general sense, they do not show the exact installation methods for your particular vehicle. If you do not have the experience, do not attempt the installation yourself, but instead ask your Authorized Infinity Car Audio Dealer about professional installation options.

PRECAUTIONS

• Turn off all audio systems and other electrical devices before you start. Disconnect the (−) negative lead from your vehicle's battery.
• At the installation site, locate and make a note of all fuel lines, hydraulic brake lines, and electrical wiring. Use extreme caution when cutting or drilling in and around these areas.
• Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Always wear protective eyewear when using any tools.

INSTALLATION

The Beta XP One/Ten crossover can be mounted in any convenient location. However, do not mount a crossover in an exposed outside area and place it nearer to the speakers than to the amplifier.

1. At the mounting site, use the crossover base to mark two screw holes. Make sure the intended site provides necessary clearance for the mounting screws. Use a hole punch for drilling guides. If necessary, clear away any carpet or other material prior to drilling.
2. Use a drill with a 1/8" bit to drill two holes for the crossover and fasten it to the site with the supplied mounting screws.
3. Observing correct polarity, connect speaker wires from the amplifier output and the mid-woofer and tweeter terminals to the appropriate crossover terminals, as shown in Figure 1 (on other side).
4. Set the Tweeter and Woofer controls fully clockwise (refer to Figure 2 on other side), reconnect the battery, and turn on the audio system.
5. For lower high frequencies, turn the Tweeter control counter-clockwise. If installed mid-range speakers are on-axis (to listening position), leave the Woofer control at the full clockwise position. For off-axis mid-range speakers, turn the Woofer control counter-clockwise. Experiment with the settings until you find a pleasing sound contour for your vehicle's installation.

SPECIFICATIONS

Crossover Frequency

Beta XP One: 1.5 kHz

Beta XP Ten: 3.5 kHz

Crossover Type: Linkwitz-Riley; 4th-order acoustic

Crossover Slope: 24 dB per octave

Adjustments: Woofer Contour and Tweeter Level

Dimensions: 2" (50.8 mm) high 3 ^3/8 " (85.7 mm) wide 8 ^3/4 " (222.3 mm) long

Infinity®

Infinity Systems, Inc. · 20630 Nordhoff Street, Chatsworth, CA 91311, USA · [phone] · FAX [phone]

Figure 2. Network frequency response shows range of Beta XP One Tweeter and Woofer controls. The Beta XP Ten is similar with a 3.5 kHz crossover.

Infinity®

Infinity Systems, Inc. · 20630 Nordhoff Street, Chatsworth, CA 91311, USA · [phone] · FAX [phone]