S-12825 RB - Pregnant PEAVEY - Free user manual and instructions
Find the device manual for free S-12825 RB PEAVEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PA Speaker Cabinet |
| Brand | Peavey |
| Model | S-12825 RB |
| Woofer Size | 12 inches |
| Tweeter Type | 1-inch compression driver |
| Power Handling (RMS) | 250 W |
| Power Handling (Peak) | 500 W |
| Impedance | 8 ohms |
| Frequency Response | 50 Hz – 20 kHz |
| Sensitivity | 98 dB SPL |
| Dimensions (H x W x D) | 24 x 16 x 14 inches (61 x 41 x 36 cm) |
| Weight | 35 lbs (15.9 kg) |
| Enclosure Material | Plywood |
| Finish | Black carpet |
| Input Connectors | 1/4" phone jack, Speakon |
| Grille Material | Steel |
| Mounting Options | Pole mount socket, floor monitor angle |
| Recommended Amplifier Power | 250 – 500 W RMS at 8 ohms |
| Cleaning Instructions | Wipe with a dry cloth; avoid moisture |
| Safety Warning | Ensure proper ventilation; do not exceed power rating |
| Spare Parts Availability | Contact Peavey authorized service centers |
| Intended Use | Live sound reinforcement, PA system |
Frequently Asked Questions - S-12825 RB PEAVEY
How do I connect the Peavey S-12825 RB to an amplifier?
Use a standard speaker cable with either a 1/4" phone jack or a Speakon connector. Ensure the amplifier is turned off before connecting. Match the impedance (8 ohms) and power handling (250-500W RMS) of the speaker.
What is the impedance of this speaker?
The Peavey S-12825 RB has an impedance of 8 ohms.
What is the power handling capacity?
The speaker handles 250 W RMS (continuous) and 500 W peak. Use an amplifier that delivers between 250 and 500 watts RMS at 8 ohms for optimal performance.
Can I use this speaker with a subwoofer?
Yes, the Peavey S-12825 RB works well as a mid/high cabinet when paired with a subwoofer. Use an active crossover or a DSP to separate low frequencies (e.g., below 80-100 Hz) to the subwoofer.
How should I clean and maintain this speaker?
Wipe the enclosure with a dry, soft cloth. Do not use water or cleaning solvents. Keep the grille and drivers free of dust. Avoid exposing the speaker to moisture or extreme temperatures.
What type of cables do I need?
Use speaker cables with 1/4" TS jacks or Speakon connectors. For long runs, use thick gauge wire (12-14 AWG) to minimize power loss.
Is the speaker covered by warranty?
Peavey typically offers a limited warranty for defects in materials or workmanship. Check your purchase documentation or contact Peavey customer support for details specific to your region.
Where can I find the user manual?
The user manual can be downloaded as a PDF from the notice-facile.com website or the official Peavey support page. Use the 'Download' button on the manual page.
Can I mount this speaker on a stand?
Yes, the cabinet has a pole mount socket (standard 1.5" diameter) for tripod speaker stands. Ensure the stand is rated for the speaker's weight (35 lbs / 15.9 kg).
What is the frequency response of this speaker?
The Peavey S-12825 RB has a frequency response of 50 Hz – 20 kHz, making it suitable for full-range sound reproduction in live sound applications.
User questions about S-12825 RB PEAVEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual S-12825 RB - PEAVEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S-12825 RB by PEAVEY.