TO25-S12 - Server GIGABYTE - Free user manual and instructions
Find the device manual for free TO25-S12 GIGABYTE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Gigabyte |
| Model | TO25-S12 |
| Form Factor | 2U Rackmount |
| Processor Support | Intel Xeon Scalable Processors |
| Memory | DDR4 ECC RDIMM, up to 1TB (16x slots) |
| Storage Bays | 12x 3.5" Hot-swap SATA/SAS |
| RAID Support | Software RAID 0/1/5/10; Optional Hardware RAID |
| Networking | 2x 10GbE RJ45 + 1x Dedicated Management Port |
| Power Supply | Redundant 800W (80+ Platinum) |
| Cooling | 4x Hot-swap System Fans |
| Management | IPMI 2.0 / BMC with Dedicated Web Interface |
| Dimensions (W x H x D) | 437 x 89 x 648 mm |
| Weight | ~25 kg (fully populated) |
| Operating Temperature | 5°C to 35°C |
| Certifications | CE, FCC, RoHS |
| Maintenance | Tool-less Access to Internal Components |
| Safety Features | Over-current, Over-voltage Protection |
| Spare Parts Availability | Authorized Gigabyte Resellers |
| Warranty | 3 Years Limited (Parts & Labor) |
Frequently Asked Questions - TO25-S12 GIGABYTE
How do I install the server in a rack?
Attach the rack rails to the server and then slide it into the rack, securing with screws. Ensure proper ventilation and cable management.
What type of hard drives are supported?
The server supports 3.5-inch SATA/SAS hot-swap hard drives. Both HDDs and SSDs are compatible with the backplane.
How to access the BIOS setup?
Press Del during boot to enter BIOS. Navigate using arrow keys to configure system settings such as boot order and virtualization.
How to reset the BMC (Baseboard Management Controller)?
You can reset the BMC via the web interface or by shorting the CMOS jumper on the motherboard. Refer to the manual for exact jumper location.
Can I use non-ECC memory?
No, the server requires ECC Registered DDR4 memory. Non-ECC memory may cause system instability or failure to boot.
How to update the system firmware?
Download the latest firmware from Gigabyte's support site. Use the BMC web interface or a USB drive with the BIOS update tool to flash.
How to configure RAID arrays?
Enter the RAID configuration utility by pressing Ctrl+I during boot (for Intel RSTe) or use the optional hardware RAID manager. Create arrays as needed.
What is the default IPMI password?
The default username is admin and password is typically printed on a label on the chassis. If not, try 'admin' or 'password' and change immediately.
How to connect to the management interface?
Connect an Ethernet cable to the dedicated management port. Assign an IP via DHCP or set static IP in BIOS. Access via web browser using https://
How to troubleshoot power issues?
Check both power supplies for indicator lights. Ensure power cords are secure. If no power, test with a known working outlet. Reset the PSU by unplugging for 30 seconds.
User questions about TO25-S12 GIGABYTE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual TO25-S12 - GIGABYTE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TO25-S12 by GIGABYTE.