LU-1004 - Hairpin LUMME - Free user manual and instructions

Product Type	Hair Clamp
Brand	LUMME
Model	LU-1004
Material	Plastic and Metal
Dimensions	Approx. 10 cm (4 inches) length
Weight	Approx. 25 g
Color	Black (typical)
Clamping Mechanism	Spring-loaded jaw
Suitable Hair Types	All hair types
Usage	Holding hair in place during styling or daily use
Care Instructions	Wipe clean with a dry cloth; avoid water immersion
Storage	Store in a dry, cool place away from direct sunlight
Safety	Keep away from heat sources and open flames
Package Includes	1 x Hair Clamp
Warranty	Standard manufacturer warranty
Country of Origin	China

Frequently Asked Questions - LU-1004 LUMME

How do I use the LUMME LU-1004 hair clamp?

Simply press the ends to open the clamp, place it over your hair, and release to secure. It holds hair firmly without slipping.

Can I use this hair clamp on wet hair?

Yes, it works on wet or dry hair. However, avoid using it with very hot styling tools directly on the clamp.

How do I clean the hair clamp?

Wipe with a soft, dry cloth. Do not submerge in water or use harsh chemicals.

Will the clamp damage my hair?

No, the clamp is designed with smooth edges and a gentle spring to prevent hair breakage or snags.

Is the LU-1004 heat-resistant?

The plastic parts are not heat-resistant. Keep away from curling irons, flat irons, or blow dryers.

What size is this hair clamp?

It measures approximately 10 cm (4 inches) in length, suitable for medium to thick hair sections.

Is it suitable for thick or curly hair?

Yes, the strong spring grip holds thick and curly hair securely.

How should I store the hair clamp?

Store in a dry place away from direct sunlight and heat to prevent warping.

Can I adjust the tension of the clamp?

No, the tension is fixed and cannot be adjusted. It is designed for optimal grip without being too tight.

Where is the LUMME LU-1004 manufactured?

It is manufactured in China under LUMME quality standards.

USER MANUAL LU-1004 LUMME

Red and silver hair curling iron with label 'LURME' on the handle (no other text or symbols visible)

LÜMME

LU-1004

GBR Parts list

1. Unheated tip
2. Tab
3. Heating element
4. Safe stand
5. Handle
6. Operation light indicator
7. Switch On. / Off.
8. Cord swivel protection

NLD Onderdelenlijst

IMPORTANT SAFETY INSTRUCTIONS

This User Manual contains information on the use and care of this product. Please read this user manual carefully before using the appliance and save it for future reference.

• Before the first use, check the device specifications and the power supply in your network.
- Incorrect handling can cause damage to the device and its user.
- Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
- For indoor use only.
- Do not use the device with a damaged cord, plug or other damages.
- Keep the power cord away from sharp edges and/or hot surfaces.
- Do not pull the cord, always pull the plug. Do not reel the cord around the device housing.
- Never attempt to dissemble and/or repair the item by yourself. If you encounter problems, please contact the nearest customer service center.
• Always unplug the device and let it cool down before cleaning and/or removing parts. Keep unplugged when not in use.
• To avoid electric shock and/or fire, do not submerge in water or other liquids. If this occurs, immediately unplug the device and contact your service center for inspection.
- This appliance is not intended to be used by persons (including children) with reduced physical, sensory or mental capabilities. Neither for persons with a lack of experience and/or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety
• The heating plates of this device can be extremely hot when in use, be very careful!

NOTE:

- Do not use this device in a bathroom or near a water (supply) source. Do not touch the device with wet hands.

OPERATING INSTRUCTIONS

• For perfect styling the hair should be washed and dried. It is not advised to use hairspray before applying this device.
  • The device is equipped with an On/Off switch.

PREHEATING

• Place the device on a flat stable surface and connect it to a power supply.
• Press the On/Off switch and allow the device to warm up.

LÜMME

LU-1004

HAIR STYLING

• Place strands of 3-5 cm length into the clamp.
• Roll the hair across the surface of the nozzle towards the hair root. Do not place the device close to your head.
• Hold the tongs in this position for 15-20 seconds to create tight curls depending on the type of hair. Always perform a test! It is better to start with a too short period than with a too long period to avoid the chance of burning your hair. Also, if you would just like to create waves rather than curls we advise you to keep the tongs in place for a shorter period of time.
• Before releasing the tab, loosen up half a turn on the curled hair (long hair a little more) and release the tab.
• Pull out the crimper from the center of the curl. Allow the hair to cool down, try to not disturb the already created curls.
  • After styling you can model your hair in the desired design.

SHUT OFF

• Press the On/Off switch, the indicator light turns off.
• Unplug the device.
• Before storing this device make sure it has completely cooled off.

CLEANING AND MAINTENANCE

• Unplug the device from the socket and let it cool off completely.
• Wipe the housing, using a slightly damp cloth. Do not use any abrasive materials.
• Do not allow water or other liquids into the appliance.
• Do not wrap the cord around the body of the device as this may cause damage to the cord.
• Store the device in a dry place.

SPECIFICATION

Power supply	Power	Net weight / Gross weight	Package size (L x W x H)
220-240 V, 50 Hz	25 W	0,18 kg / 0,21 kg	349 mm x 75 mm x 40 mm

Producer:

JIEYANG BADA HARDWARE ELECTRIC APPLIANCES CO., LTD

Tangpu Thoroughfare, Jieyang Testment Zone, Jieyang City, Guangdong Province, China

Made in China

WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)

Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production.

The manufacturer reserves the right to change the design and technical data of the appliance without notice.

NLD HANDLEIDING

BELANGRIJKE VEILIGHEIDSVOORSCHRIFTEN

JIEYANG BADA HARDWARE ELECTRIC APPLIANCES CO., LTD Tangpu Thoroughfare, Jieyang Testment Zone, Jieyang City, Guangdong Province, China Made in China