DVL223EBCC - Tumble drier GE - Free user manual and instructions
Find the device manual for free DVL223EBCC GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Tumble Dryer |
| Brand | GE |
| Model | DVL223EBCC |
| Capacity | 7.0 cu. ft. |
| Dimensions (Width x Depth x Height) | 27 x 30 x 36 inches |
| Weight | 120 lbs |
| Power Supply | 240V, 60Hz, 30A |
| Drying Programs | Auto Dry, Timed Dry, Delicate, Heavy Duty, Air Fluff |
| Temperature Settings | High, Medium, Low, Extra Low |
| Sensor Dry | Yes, moisture sensors for optimal drying |
| Reversible Door | Yes, for flexible installation |
| Lint Filter | Removable, washable mesh filter |
| Drum Material | Stainless steel |
| Noise Level | Approx. 68 dB |
| Venting | 4-way rear venting; 4-inch duct |
| Controls | Electronic touch controls with LED display |
| Energy Star Certified | Yes |
| Safety Features | Door switch, thermal fuse, overload protection |
| Maintenance | Clean lint filter after each load; check vent annually |
| Warranty | 1 year limited parts and labor |
Frequently Asked Questions - DVL223EBCC GE
How do I clean the lint filter on my GE DVL223EBCC dryer?
Unplug the dryer, open the door, and pull the lint filter straight up. Roll off the lint with your fingers or rinse with water. Allow to dry completely before reinserting.
What is the recommended venting duct size for this dryer?
Use a rigid or flexible metal duct with a 4-inch diameter. Ensure the duct is as short and straight as possible for maximum efficiency.
Why does my dryer stop mid-cycle?
Common causes include a clogged lint filter, blocked vent, or thermal fuse tripping. Check the lint filter and vent, then reset the dryer by unplugging for 5 minutes.
Can I stack this dryer on top of a washer?
Yes, but you must use the GE stacking kit (model GESK-1) designed for this unit. Follow the installation instructions in the manual.
How do I reverse the door swing?
The door is reversible. Refer to the manual for step-by-step instructions. Typically, you need to remove hinge screws and swap the door handle side.
What does the 'Clean Lint' alert mean?
It indicates the lint filter needs cleaning. The dryer may also reduce performance. Clean the filter and press 'Start' to resume.
Is this dryer compatible with a 110V outlet?
No, the DVL223EBCC requires a 240V, 30A electrical connection. Do not use an adapter or extension cord.
How do I troubleshoot a dryer that is not heating?
Check the power supply, thermal fuse, and heating element. Ensure the vent is not blocked. If the fuse is blown, replace it with the exact part specified in the manual.
What is the maximum load size for this dryer?
Do not overload; the maximum capacity is 7.0 cubic feet. Overloading can cause poor drying and potential damage.
Where can I find replacement parts for my GE dryer?
Authorized GE parts dealers or online retailers like GE Appliance Parts. Use the exact model number DVL223EBCC for correct fit.
User questions about DVL223EBCC GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual DVL223EBCC - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DVL223EBCC by GE.