SAMSUNG SI-L8T19112CEU - Light

SI-L8T19112CEU - Light SAMSUNG - Free user manual and instructions

Find the device manual for free SI-L8T19112CEU SAMSUNG in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SAMSUNG SI-L8T19112CEU - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type LED Tube Light
Model SI-L8T19112CEU
Power Consumption 19.0W
Color Temperature 4000K
Dimensions Diameter 28mm x Length 1213.6mm
Base Type G13
Replacement For 36W Fluorescent Lamp
Input Voltage 220-240V AC (via magnetic ballast)
Compatible Ballast Magnetic ballast only
Includes LED tube, LED starter, user manual
Installation Switch off power, remove old lamp, replace starter, insert LED tube, turn 90° to lock
Safety Warnings For dry locations only; not for outdoor use; do not use in totally enclosed fixtures; do not modify
Warranty 3 years from purchase date (requires receipt)
Usage Restrictions Not for emergency light fittings; single lamp only; no series connection; not for direct AC connection
Starter Type LED tube starter (glow starter not allowed)
Disposal Dispose according to local regulations for electronic waste

Frequently Asked Questions - SI-L8T19112CEU SAMSUNG

Can I use this LED tube with an electronic ballast?
No, this LED tube is designed for magnetic ballast only. Using it with an electronic ballast may cause malfunction or damage.
Can I install this LED tube outdoors?
No, this product is for dry locations only and should not be exposed to weather or moisture.
Do I need to remove the existing magnetic ballast?
No, the LED tube is compatible with the existing magnetic ballast. Just replace the old starter with the included LED starter.
What is the purpose of the included LED starter?
The LED starter replaces the old fluorescent starter and is required for proper operation with the magnetic ballast. Do not use a glow starter.
Can I install multiple LED tubes in series?
No, series connection is not permitted. Each tube must be wired in parallel according to the installation instructions.
How do I install the LED tube?
First, switch off power. Remove the old fluorescent lamp. Replace the old starter with the provided LED starter. Insert the LED tube into the lamp holder and rotate 90° to lock in place. Finally, switch on power.
What should I do if the LED tube does not light up?
Check that the power is on, the magnetic ballast is compatible, the LED starter is correctly installed, and the tube is securely locked. If it still doesn't work, consult a qualified electrician.
Is this LED tube dimmable?
No, this LED tube is not dimmable and should only be used on/off with a compatible magnetic ballast.
What is the warranty period?
Samsung offers a 3-year warranty from the purchase date. Keep your receipt or invoice as proof of purchase.
Can I use this LED tube in an enclosed light fixture?
No, do not use in totally enclosed fixtures as it may cause overheating. Ensure adequate ventilation.

User questions about SI-L8T19112CEU SAMSUNG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Light in PDF format for free! Find your manual SI-L8T19112CEU - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SI-L8T19112CEU by SAMSUNG.

USER MANUAL SI-L8T19112CEU SAMSUNG

Always have a qualified electrician to do your electrical work!

Switch off power before starting the installation!

Instructions for mounting:

Schematic steps for removing a fluorescent lamp and inserting a double-capped LED lamp

CCG LED Tube Starter S U N p.f correction capacitor SAMSONO LED Tube

1 2 90° 3 4 2 5 1 2 6 7 90° 8

• Installation instructions

(1) Switch off electricity.
(2) and (3) Remove the conventional lamp.
(4) and (5) Replace the old starter with the LED tube starter.
(6) Insert the LED lamp into the lamp holder.
(7) Secure it in position by turning the lamp 90°.
(8) Switch on electricity.

※ The overall energy efficiency and light distribution of installed lamps are determined by the design of the installation.

※ Existing power factor compensation capacitors worsen the power factor, but can remain within the light fitting.

1200mm L-Tube suitable for G13 Base Socket

Replacement: 1200mm 16.5W/19.0W replace fluorescent lamp 36.0W

Packing details: LED tube, LED Starter, User manual

Notice:

This lamp is designed for general lighting service (excluding eg.explosive atmospheres)

This LED tube is compatible with Magnetic ballast only.

This lamp is not suitable for use in emergency light fittings designed for double-capped fluorescent lamps.

Do not use this product in outdoor areas.

For dry locations only - not for use where exposed to the weather.

SAMSUNG SI-L8T19112CEU - Notice: - 1

SAMSUNG SI-L8T19112CEU - Notice: - 2

SAMSUNG SI-L8T19112CEU - Notice: - 3

SAMSUNG SI-L8T19112CEU - Notice: - 4

SAMSUNG SI-L8T19112CEU - Notice: - 5

Warning:

Any modification of the light fitting when installing the LED lamps is not permitted.

Please do not install this Magnetic ballast compatible LED tube using a glow starter.

Please do not install this Magnetic ballast compatible LED tube using a direct connection to an AC source.

Please do not install this Magnetic ballast compatible LED tube using another independent LED driver.

Please do not replace with a different type of LED tube! Risk of electrical shock!

Please use only for a single lamp (do not install over a double lamp and above).

Series connection is not permitted when installing this product.

Do not use this product in outdoor areas.

For dry locations only - not for use where exposed to the weather.

Turn off power before installing or replacing lamp.

Do not touch this product with wet hands.

Do not look directly at the lamp when being used.

Do not use in totally enclosed fixtures.

Do not disassemble, repair or alter in any way.

Power consumptionSize CCTModel Name
SI-L8R17212Cxy16.5WD28 x L1213.6mm max5000K
SI-L8T17212Cxy16.5WD28 x L1213.6mm max4000K
SI-L8V17212Cxy16.5WD28 x L1213.6mm max3000K
SI-L8R19112Cxy19.0WD28 x L1213.6mm max5000K
SI-L8T19112Cxy19.0WD28 x L1213.6mm max4000K
SI-L8V19112Cxy19.0WD28 x L1213.6mm max3000K

xy denotation : xy can be A-Z, standing for national/regional abbreviations eg. EU, CN, etc.

EU – European Union

Ballast Information:(One lamp)

Maker Model Name
HelvarL36TL4
HelvarL36A-K
HelvarL36A-T
ABBVVG 36-120 CF-30
ABB36-120 CF-55
Vossloh & SchwabeL36I.342
TRIDONICEC 36-1 C501K
SimensVVG 5LZ 363

Warranty:

The installation date must be documented to make a warranty claim.

The Samsung Electronics guarantees a product life-time of 3 years after the purchase date.

If you do not have a receipt (or invoice) the warranty starts from the production date.

The Samsung Electronics guarantee does not apply to failures caused by abnormal use.

In such circumstances all service and repair costs must be paid for by the customer.

The LED tube starter is a consumable, which can be purchased from your dealer.

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SAMSUNG

Model : SI-L8T19112CEU

Category : Light