Punch P1-2X10 - Subwoofer Rockford Fosgate - Free user manual and instructions
Find the device manual for free Punch P1-2X10 Rockford Fosgate in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Rockford Fosgate |
| Model | Punch P1-2X10 |
| Speaker Size | 10 inches |
| Impedance | 4 ohms |
| Power Handling (RMS) | 200 watts |
| Peak Power Handling | 400 watts |
| Sensitivity | 87 dB |
| Frequency Response | 30 Hz - 250 Hz |
| Mounting Depth | 5.5 inches |
| Cutout Diameter | 9.25 inches |
| Recommended Enclosure Volume (Sealed) | 1.0 cu ft |
| Recommended Enclosure Volume (Ported) | 1.5 cu ft |
| Cone Material | Polypropylene |
| Surround Material | Rubber |
| Weight | 12 lbs |
| Wiring | Dual voice coil (2-ohm or 4-ohm compatible) |
| Maintenance | Clean with a dry, soft cloth. Avoid moisture. |
| Safety | Ensure proper polarity and secure mounting. Disconnect power before installation. |
| Repair and Servicing | Contact Rockford Fosgate authorized service center for any repairs. |
| General Information | Designed for car audio systems. Use with a compatible amplifier. |
Frequently Asked Questions - Punch P1-2X10 Rockford Fosgate
What is the power handling of the Rockford Fosgate Punch P1-2X10?
The RMS power handling is 200 watts and peak power is 400 watts.
What is the impedance of this subwoofer?
It has a dual 4-ohm voice coil, configurable for 2-ohm or 8-ohm loads.
What enclosure size is recommended for this subwoofer?
For a sealed enclosure, use 1.0 cu ft. For a ported enclosure, use 1.5 cu ft.
What is the mounting depth of the Punch P1-2X10?
The mounting depth is 5.5 inches.
How do I wire this subwoofer for a 2-ohm load?
Connect the two voice coils in parallel (positive to positive, negative to negative) for a 2-ohm load.
What is the frequency response of this subwoofer?
The frequency response is 30 Hz to 250 Hz.
What type of cone material does it use?
It features a polypropylene cone and a rubber surround for durability.
Can I use this subwoofer in a home audio system?
Yes, but it is optimized for car audio. For home use, ensure proper enclosure and amplifier matching.
How do I clean and maintain the subwoofer?
Gently clean the cone and surround with a dry, soft cloth. Avoid water or cleaning solvents.
Does Rockford Fosgate offer a warranty on this subwoofer?
Yes, it comes with a 1-year limited warranty against defects. Contact authorized dealers for claims.
User questions about Punch P1-2X10 Rockford Fosgate
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Punch P1-2X10 - Rockford Fosgate and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Punch P1-2X10 by Rockford Fosgate.