Skull - Watch HYT - Free user manual and instructions
Find the device manual for free Skull HYT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wristwatch |
| Brand | HYT |
| Model | Skull |
| Movement | Mechanical automatic with hydro-mechanical module |
| Case Material | Titanium |
| Case Diameter | 48 mm |
| Case Thickness | 18.2 mm |
| Weight | Approx. 100 g |
| Water Resistance | 50 m (5 ATM) |
| Crown | Screw-down crown |
| Crystal | Sapphire crystal with anti-reflective coating |
| Dial | Skull motif with hour markers and hydro-mechanical indicator |
| Strap Material | Leather or rubber (depending on version) |
| Power Reserve | Approx. 72 hours |
| Functions | Hours, minutes, seconds, hydro-mechanical time indication |
| Luminous | Super-LumiNova on hands and markers |
| Warranty | 2 years international warranty |
| Maintenance | Regular servicing every 3-5 years by authorized center |
| Cleaning | Wipe with soft cloth; avoid chemicals |
| Spare Parts | Available through HYT service network |
Frequently Asked Questions - Skull HYT
How do I set the time on my HYT Skull watch?
Pull the crown to position 2 and turn it clockwise to set the time. Push the crown back in after setting. Do not adjust the time between 9 PM and 3 AM to avoid damaging the movement.
How does the hydro-mechanical water indicator work?
The hydro-mechanical indicator uses two immiscible fluids in a capillary tube. One fluid moves to show the hour. A bellows system controls the fluid. For details, refer to the manual.
Is the HYT Skull watch water resistant?
Yes, it is water resistant to 50 meters (5 ATM). It is suitable for swimming but not for diving. Ensure the crown is fully pushed in before exposure to water.
What type of movement does the HYT Skull use?
It uses a mechanical automatic movement with a hydro-mechanical module. The movement is hand-winding and self-winding via an oscillating rotor.
How do I clean my HYT Skull watch?
Use a soft, lint-free cloth lightly dampened with water to wipe the case and strap. Avoid solvents or abrasive cleaners. For leather straps, use a leather conditioner.
What is the power reserve of the HYT Skull?
The power reserve is approximately 72 hours when fully wound. You can wind the watch manually by turning the crown clockwise about 30-40 times.
Can I replace the strap myself?
Yes, the strap can be easily replaced using a spring bar tool. Ensure the replacement strap is the correct width (22 mm). However, for integrated bracelets, visit an authorized service center.
Why is the hydro-mechanical indicator not moving?
If the watch has not been worn for a long time, the fluid may be stuck. Try winding the watch and wearing it for a day. If the issue persists, contact HYT service. Do not attempt to fix it yourself.
How often should I service my HYT Skull?
HYT recommends servicing every 3 to 5 years. The hydro-mechanical system requires specialized knowledge, so always use an authorized service center.
What should I do if water gets inside the watch?
If moisture appears, immediately stop using the watch and take it to an authorized service center. Do not attempt to open or dry it yourself, as this may cause further damage.
User questions about Skull HYT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Watch in PDF format for free! Find your manual Skull - HYT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Skull by HYT.