9002FX-ST - Unknown Red Lion - Free user manual and instructions
Find the device manual for free 9002FX-ST Red Lion in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Industrial Ethernet Switch |
| Model | 9002FX-ST |
| Port Configuration | 8 x 10/100Base-T(X) RJ-45 + 2 x 100Base-FX ST Fiber |
| Power Input | 12-48 VDC Redundant (dual terminal block) |
| Power Consumption | 18 W (max) |
| Operating Temperature | -40°C to 75°C |
| Enclosure | IP30, metal housing |
| Mounting | DIN rail or panel mount (brackets included) |
| Dimensions (W x D x H) | 4.5 x 6.2 x 1.5 inches (114 x 157 x 38 mm) |
| Weight | 1.2 lbs (0.54 kg) |
| Switching Capacity | 2.0 Gbps |
| MAC Address Table | 8K entries |
| Jumbo Frame Support | Up to 9216 bytes |
| Management Protocols | SNMP v1/v2c/v3, STP/RSTP, IGMP, VLAN, QoS, Port Mirroring |
| LED Indicators | Power, Fault, Link/Act per port |
| Safety Certifications | UL 508, CE, FCC Part 15 |
| Warranty | 5 years |
Frequently Asked Questions - 9002FX-ST Red Lion
What is the default IP address of the 9002FX-ST switch?
The default IP address is 192.168.1.100 with subnet mask 255.255.255.0. You can access the web interface via a browser.
How do I perform a factory reset on the Red Lion 9002FX-ST?
Press and hold the Reset button on the front panel for at least 10 seconds until the Fault LED flashes, then release. The switch will reboot with factory defaults.
What are the default login credentials for the web interface?
Default username is admin and password is 123456. It is recommended to change the password immediately after first login.
How do I connect fiber optic cables to the ST ports?
Use multimode fiber with ST connectors. Ensure the connector is clean and push firmly until it clicks. For single-mode, use appropriate transceivers if supported.
Can the switch be mounted on a DIN rail?
Yes, the 9002FX-ST comes with a DIN rail clip attached. Simply snap it onto a standard 35mm DIN rail in an industrial cabinet.
How do I enable VLANs on this switch?
Access the web interface under VLAN Configuration. Create VLANs (e.g., VLAN 10, 20) and assign ports as tagged or untagged members. Apply and save changes.
What is the maximum distance for fiber connections using the ST ports?
With multimode fiber (62.5/125 µm), the maximum distance is 2 km. For single-mode fiber, external transceivers may be needed for longer distances.
How can I monitor network traffic through the switch?
Enable Port Mirroring in the management interface. Select a source port and a destination port (mirror port) connected to a monitoring device.
Does the switch support redundant power supply?
Yes, it has dual 12-48 VDC power inputs. Connect both power sources for redundancy. If one fails, the other continues to power the switch.
How do I update the firmware on the 9002FX-ST?
Download the latest firmware from the Red Lion support website. In the web interface, go to Firmware Upgrade, select the file, and click Upgrade. Do not power off during upgrade.
User questions about 9002FX-ST Red Lion
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Unknown in PDF format for free! Find your manual 9002FX-ST - Red Lion and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9002FX-ST by Red Lion.