9730 - Detector STI - Free user manual and instructions

Product Type	Wire Guard Damage Stopper
Brand	STI (Safety Technology International)
Model	9730
Category	Detector Accessory
Compatible Devices	Smoke detectors, photoelectric, horn/strobe, etc.
Material	16-gauge steel wire with white powder coat finish
External Dimensions (approx)	6.5 x 6.5 x 3.5 inches (165 x 165 x 89 mm)
Internal Clearance (approx)	5.5 inches diameter x 2.5 inches depth (140 x 64 mm)
Weight	0.5 lb (227 g)
Color	White
Mounting Type	Surface mount (flush or offset)
Mounting Hardware Included	6 screws and 6 plastic anchors
Drill Bit Size Required	1/4 inch (6.35 mm)
Hole Depth Required	1-1/2 inches (38 mm)
Installation Steps	Mark holes, drill, insert anchors, secure guard with screws
Features	Vandal resistant, weather resistant, prevents accidental damage
Certifications	Not listed (likely UL/CSA compliant)
Maintenance	Clean with damp cloth and mild detergent; do not use abrasive cleaners
Warranty	Limited lifetime warranty (by manufacturer)
Country of Origin	USA
Included Items	Wire guard, 6 screws, 6 anchors, installation instructions
Usage	Indoor and outdoor applications
Repairability	Not repairable; replace entire unit if damaged

Frequently Asked Questions - 9730 STI

What is the STI-9730 used for?

The STI-9730 is a wire guard damage stopper designed to protect smoke detectors, and similar devices from physical impact, vandalism, and accidental damage.

How do I install the STI-9730?

To install, center the guard over the device, mark the six hole locations, drill 1/4-inch holes 1.5 inches deep, insert the provided plastic anchors, place the guard, and tighten screws.

What tools are required for installation?

You will need a drill with a 1/4-inch drill bit, a pencil or marker, and a screwdriver (Phillips or flathead depending on screws).

What size detector does the STI-9730 fit?

The STI-9730 fits most standard smoke detectors up to 6 inches in diameter and approximately 2.5 inches deep. It is compatible with many models from various manufacturers.

Is the STI-9730 suitable for outdoor use?

Yes, the guard is made of weather-resistant steel with a powder coat finish, making it suitable for both indoor and outdoor installations.

Can I paint the wire guard?

Painting is not recommended as it may interfere with the fit or finish. The guard is designed to be used as supplied in white.

How should I clean the STI-9730?

Clean with a damp cloth and mild detergent. Avoid abrasive cleaners or solvents that could damage the coating.

Does the STI-9730 come with mounting hardware?

Yes, the package includes 6 screws and 6 plastic anchors suitable for most wall materials. Additional hardware may be needed for unusual surfaces.

Where can I purchase replacement parts for the STI-9730?

Replacement components are not sold separately. Contact STI customer service or an authorized distributor for a replacement unit.

What is the warranty on the STI-9730?

STI offers a limited lifetime warranty against defects in materials and workmanship. Register online at www.sti-usa.com/wc14 for warranty validation.

USER MANUAL 9730 STI

Safety Technology International, Inc. 2306 Airport Road • Waterford, Michigan 48327-1209 Phone: [phone] • Fax: [phone] Toll Free: 800-888-4784 • E-mail: [e-mail] Web: www.sti-usa.com

Safety Technology International (Europe) Ltd. Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch Worcestershire • 898 0HU • England • Tel: [phone] Fax: [phone] • Freephone: 0800 085 1678 (UK only) E-mail: [e-mail] • Web: www.sti-europe.com

INSTALLATION INSTRUCTIONS

1. Center and place wire guard over device or product to be protected and mark all 6 hole locations with pencil or marker.
2. Drill all 6 holes using 1/4" diameter drill 1-1/2" deep.
3. Insert anchors into drilled holes.
4. Place wire guard in position, insert screws and tighten.

EXTERNAL DIMENSIONS

INTERNAL DIMENSIONS

Electronic warranty form at www.sti-usa.com/wc14

INSTALLATION OF STI-9730 WIRE GUARD DAMAGE STOPPER®

All specifications and information shown were current as of publication and are subject to change without notice.

9730 OCT2010

ADDITIONAL WIRE GUARDS AVAILABLE

Visit www.sti-usa.com for complete details

SMOKE DETECTOR COVERS

STI-9601 Low profile - Flush mount

STI-9601-SS Low profile - Flush mount - Stainless Steel

STI-9602 Low profile - Surface mount

STI-9604 Mini - Flush mount

STI-9604-SS Mini - Flush mount -Stainless

Steel

STI-9605 Mini - Surface mount

STI-9605-SS Mini - Surface mount -

Stainless Steel

STI-9609 High profile - Flush mount

STI-9609-SS High profile - Flush mount - Stainless Steel

STI-9610 High profile - Surface mount

STI-9712 Photoelectric - Surface mount

STI-9713 Photoelectric - Flush mount

STI-9601

STI-9604-SS

PIR GUARDS

STI-9618 Corner Mount

STI-9619 Corner Mount

STI-9620 6.25 x 4 x 2.25"

STI-9621 7 x 5.75 x 4.50"

STI-9622 8.75 x 4 x 3.75"

STI-9618

STI-9621

EXIT SIGN WIRE CAGES

STI-9640 10.5 x 13.75 x 2.75"

STI-9740 15.5 x 20.5 x 6"

STI-9641 10.7 x 14.6 x 4"

STI-9644 8.7 x 17.7 x 5"

STI-9645 13.8 x 21.7 x 5.9"

STI-9649 10.75 x 24.75 x 11.25"

STI-9703 5 x 13.5 x 4"

STI-9649

BEAM SMOKE DETECTORS

STI-9625 For System Sensor Beam

Smoke Detector 6424

STI-9706 Flush Mount

STI-9707 Surface Mount

STI-9624

STI-9625

CLOCK/BELL WIRE CAGES

STI-9631 10.5" Diameter

STI-9631-SS 10.5" Diameter - Stainless Steel

STI-9631-R 10.5" Diameter - Red

STI-9632 16.5 Diameter

STI-9632-SS 16.5 Diameter - Stainless Steel

STI-9633 20" Diameter

STI-9632

BAY LIGHT WIRE CAGES

STI-9702 For Hubbell * Superbay Lights

21.43 x 22.50

STI-9709 For Hubbell * Superbay Lights - 24.5

×26"

STI-9702

BEACON & SOUNDER CAGES

STI-9614 7.9×6"

STI-9615 3.7 x 3.5"

SII-9617 5.9 x 4.9"

STI-9664 3.86 x 6.18"

STI-9665 7 x 8.43"

STI-9615

STI-9664

MISCELLANEOUS WIRE CAGES

STI-9651 Fluorescent Light Damage Stopper

STI-9705 Horn/Strobe/Speaker Damage Stopper - Flush

STI-9708 Horn/Strobe/Speaker Damage Stopper - Surface

STI-9711 Horn/Strobe/Speaker Damage Stopper - Flush

STI-9714 Horn/Strobe/Speaker Damage Stopper - Surface

STI-9716 Camera Damage Stopper

STI-9717 Speaker/Strobe Damage Stopper ✗ - Flush

STI-9720 Speaker Strobe Damage Stopper - Surface

STI-9730 Wire Guard Damager Stopper

STI-9796 Outdoor Light Damage Stopper

STI-9880 Fluorescent Lighting Damage Stopper - Small

STI-9881 Fluorescent Lighting Damage Stopper ^4 - Large

STI-9705

STI-9796

STI-9880