SI2227TB - Car kit Scosche - Free user manual and instructions

Product Type	In-Dash Installation Kit for Aftermarket Radio
Brand	Scosche
Model	SI2227TB
Vehicle Compatibility	2006-2013 Suzuki Grand Vitara
Radio Type Supported	Single DIN or Double DIN Aftermarket Radio
Material	Polypropylene (PP) and Metal Brackets
Color	Black
Included Components	Mounting kit panel, pocket, trim ring, screws, metal mounting brackets
Installation Type	Mounts to factory metal brackets; rear support available (sold separately)
Safety Features	Disconnect vehicle battery before installation; avoid airbag wiring
Cleaning Instructions	Wipe with a soft, damp cloth; do not use abrasive cleaners
Warranty	Limited lifetime warranty (refer to manufacturer)
Manufacturing Country	China (typical)
Weight	Approximately 0.5 lb (0.23 kg)
Dimensions (Open Package)	12 x 6 x 3 inches (30.5 x 15.2 x 7.6 cm)

Frequently Asked Questions - SI2227TB Scosche

What vehicles is the Scosche SI2227TB compatible with?

The Scosche SI2227TB is designed for 2006-2013 Suzuki Grand Vitara models.

Can I install a single DIN or double DIN radio?

Yes, this kit supports both single DIN and double DIN aftermarket radios. A pocket is included for single DIN installations.

Do I need any special tools for installation?

Basic tools like screwdrivers, a trim removal tool, and a voltmeter are recommended. Avoid using test lights to prevent damage to the vehicle's electronics.

Is the rear support bracket included?

The rear support bracket is not included but is available separately to add structural integrity to the installation.

How do I mount the radio to the kit?

For single DIN, mount the radio to the factory metal brackets using the top holes. For double DIN, align the brackets to the double DIN holes (two top, one bottom) and secure with factory hardware.

What should I do before starting installation?

Always disconnect the vehicle's negative battery terminal to prevent electrical damage or short circuits.

Are there any safety warnings about airbags?

Yes, avoid all factory airbag wiring. Accidental deployment can cause serious injury or death.

How do I clean the installation kit?

Clean with a soft, damp cloth. Do not use abrasive cleaners or solvents.

What is the warranty on the Scosche SI2227TB?

Scosche offers a limited lifetime warranty. Contact their customer support for details.

Does the kit include wiring instructions?

The manual includes factory wiring codes and general installation steps. For specific vehicle wiring, refer to the vehicle's service manual.

USER MANUAL SI2227TB Scosche

Iability physical Member

STEREO INSTALLATION

FACTORY WIRING CODES

instructions.

• Bead all institutional acquiring your car stereo/cassette player for proper wiring and mounting

• See your vehicles' instructions for any special tools your installation might require.

NOTES:

DISCONNECT YOUR VEHICLES NEGATIVE BATTERY TERMINAL BEFORE THE INSTALA- TOON TO HELP PREVENT ELECTRICAL DAMAGE. WE RECOMMEND THE USE OF A VOL/T/ OHM METER OVER A TEST LIGHT TO CHECK WRING. A TEST LIGHT OR GRUNDED WIRE PROVE CAN CAUSE DAMAGE TO THE VEHICLES COMPUTER AND/OR DIAGNOSTIC SYSTEMS. AVOID ALL FACTORY AIR BAG WRING - AIR BAGS CAN ACCIDENTALUT DEPLOY CAUSING SERIOUS UNJURY OR DEATH.

Thank you for purchasing the Scoscene S1227TB Kit. This kit was manufactured with the highest of quality standards.

INTRODUCTION / PRELIMINARY

IN-DASH INSTALATION KIT FOR 2006-UP SUZUKI GRAND VITARA

.3HDSODS

S12227TB

MOUNTING THE RADIO

NOTE: REAR SUPPORT AVAILABLE SEPARATEX REAR SUPPORTING THE RADIO ADDS TO THE INSTALLATIONS STRUCTURAL INTEGRITY.

C. Secure the whole panel assembly to the dash using screws used to secure the factory radio. Trim ring. De usable Airpin radio mounting assembly to the kit panel

A. Mount the aftermarket DIN radio to the factory metal mounting breaks using top holes with the factory hardware. B. For Double din aftermarket radio align factory breaks (double din holes, two top hole and one bottom hole).

MOUNTING THE RADIO FOR SINGLE DIN OR DOUBLE DIN:

Press the pocket into the lower position of the mount opening. There are (4) hole mounting locations to mount. Use supplied screws from installation kit.

Ataching the Trim Bings:

POCKET ASSEMBLY