Fritz!Box Fon 711 - Router AVM - Free user manual and instructions
Find the device manual for free Fritz!Box Fon 711 AVM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router with integrated ADSL modem and VoIP telephony |
| Brand | AVM |
| Model | Fritz!Box Fon 711 |
| Dimensions (W x D x H) | Approx. 200 x 140 x 35 mm |
| Weight | Approx. 300 g |
| Power Supply | External power adapter, 12V DC |
| ADSL Support | ADSL2/2+ up to 24 Mbps |
| Wi-Fi Standard | IEEE 802.11g, up to 54 Mbps |
| LAN Ports | 4x 10/100 Mbps Ethernet |
| Telephone Ports | 2x analog (FXS) for VoIP telephony |
| USB Port | 1x USB 1.1 (for printer or storage) |
| Firewall | Integrated SPI firewall with NAT |
| VPN Support | IPSec, PPTP, L2TP |
| Wireless Security | WEP, WPA, WPA2, WPS |
| Maintenance and Cleaning | Clean with a dry, soft cloth. Avoid liquids and aerosols. |
| Safety | Use only the included power adapter. Place in a well-ventilated area. |
| Spare Parts and Repairability | Contact AVM support for spare parts or repair services. |
| General Information | Designed for home and small office use. Firmware updates available via AVM website. |
Frequently Asked Questions - Fritz!Box Fon 711 AVM
How do I reset the Fritz!Box Fon 711 to factory defaults?
Press and hold the Reset button on the back of the router for at least 10 seconds until the power LED blinks. The device will reboot with factory settings.
How can I change the Wi-Fi password?
Log in to the web interface (usually http://fritz.box or 192.168.178.1). Go to WLAN > Security and enter your new password in the Network Key field. Save changes.
The router is not connecting to the internet. What should I do?
First, check the ADSL cable and power. Then log into the web interface and verify the Internet settings (ISP username/password). Alternatively, run the Connection Test in the assistant.
How do I set up VoIP telephony on the Fritz!Box Fon 711?
Go to Telephony > Own Numbers and add your provider details. Then assign the number to one of the analog ports. Test by picking up a phone.
Can I use the Fritz!Box as a repeater or access point?
The Fritz!Box Fon 711 does not have a dedicated repeater mode. However, it can be configured as a simple access point by disabling DHCP and connecting via LAN.
How do I update the firmware?
Download the latest firmware from the AVM support page. Log into the web interface, go to System > Firmware Update and upload the file. Do not power off during update.
What are the default login credentials?
Default username: none, password: admin. For security, change the password immediately after first login.
The Wi-Fi signal is weak. How can I improve it?
Place the router centrally and away from walls. Adjust the antenna position. Use a different Wi-Fi channel in WLAN > Radio Channel. Consider adding a repeater.
How do I configure port forwarding?
Go to Internet > Permit Access > Port Forwarding. Add a new rule with the desired port range, protocol, and local IP address of the device.
Does the Fritz!Box Fon 711 support WPS?
Yes, it supports WPS (Wi-Fi Protected Setup). Press the WPS button on the router and activate WPS on your client device to connect securely.
User questions about Fritz!Box Fon 711 AVM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual Fritz!Box Fon 711 - AVM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fritz!Box Fon 711 by AVM.