SERIE 3-60I - Dishwasher Sauber - Free user manual and instructions

Product Type	Built-in Dishwasher
Brand	Sauber
Model	SERIE 3-60I
Width	60 cm
Height	85 cm
Depth	57 cm
Weight	45 kg
Energy Class	E
Annual Energy Consumption	262 kWh
Capacity	14 place settings
Number of Programs	6
Programs	Eco, Auto, Intensive, Normal, Quick, Soak
Functions	Delay start, Half load, ExtraDry, Hygiene
Water Consumption per Cycle	9.5 L
Noise Level	47 dB
Safety Features	Child lock, Waterproof system, Overflow protection
Maintenance	Clean filter regularly, Descale as needed
Spare Parts Availability	Yes, through Sauber service centers
Repairability Index	7.5/10
Power Supply	220-240 V, 50 Hz, 10 A

Frequently Asked Questions - SERIE 3-60I Sauber

How do I install the Sauber SERIE 3-60I dishwasher?

Ensure a standard 60 cm cutout under the counter. Connect water inlet to a cold water supply (3/4 inch thread), drain hose to sink drain, and power cable to a grounded outlet. Level the dishwasher using adjustable feet.

What should I do if the dishwasher doesn't start?

Check if the door is properly closed and latched. Verify the power supply and that the circuit breaker is on. Make sure the program dial is set correctly and press the Start button.

How do I clean the filters?

Turn off the dishwasher and remove the lower rack. Unlock the filter assembly by turning the coarse filter counterclockwise. Rinse all parts under running water, scrub if needed, reinstall and lock.

Why is my dishwasher not drying properly?

Ensure you use rinse aid and the setting is adjusted. Check that the final rinse temperature is high. Avoid overloading and use the ExtraDry function if available. Clean the filter to improve airflow.

How do I add salt and rinse aid?

Open the salt reservoir cap in the bottom of the dishwasher, fill with dishwasher salt using the funnel. For rinse aid, open the dispenser on the door and pour until the level indicator shows full. Adjust settings as needed.

What do error codes mean?

Error codes vary: E1 = water intake issue, E2 = drainage problem, E3 = heating error. Refer to the manual for full list. You can reset the appliance by unplugging for 1 minute.

Can I use regular dish soap?

No, use only dishwasher detergent (powder, gel, or tablets). Regular dish soap causes excessive suds and may damage the appliance. If suds appear, run a rinse cycle and add salt.

How do I program the delayed start?

Load the dishwasher, select a program, then press the Delay button repeatedly to set hours (1-24). Close the door and the delay will begin. The display shows remaining time.

Is the Sauber SERIE 3-60I energy efficient?

With an energy class E, it consumes 262 kWh annually. Using the Eco program optimizes energy and water use. For maximum efficiency, run full loads and use the delay start to avoid peak hours.

How do I replace a broken spray arm?

Order a replacement spray arm from Sauber customer service. Remove the old arm by unscrewing the retaining nut or clip. Install the new arm and ensure it rotates freely. Consult the manual for your exact model.

USER MANUAL SERIE 3-60I Sauber

USANDO SU LAVAVAJILLAS

Antes de usar su lavavajillas:

manguera de suministro ordinario

1 Instalar el lavavajillas

Operación (Botón)

ADVERTENCIA

Imported by Elec. Sauber s.a.

Paseo de la Castellana 93, planta 1^a , 28046 Madrid, Spain.