AIFZ5600 - Hob ASPES - Free user manual and instructions

Product Type	Induction Hob
Brand	Aspes
Model	AIFZ5600
Number of Cooking Zones	3 (including Flexi Area)
Power Supply	220-240V~ 50/60Hz
Installed Electric Power	7200W
Product Dimensions (W x D x H)	520 x 590 x 65 mm
Cut-out Dimensions (A x B)	490 x 560 mm
Material	Glass-ceramic
Control Type	Touch controls
Key Functions	Boost, Flexi Area, Stop & Go, Timer, Child Lock
Safety Features	Auto shutdown, residual heat indicator, pan detection, overheat protection, key lock
Cookware Requirements	Induction-compatible pans, flat base, min. diameter 120mm
Cleaning	Use specialized glass cleaner; avoid abrasive scourers
Installation Requirements	Well-ventilated space, min. 50mm clearance, professional installation recommended
Timer Range	Up to 99 minutes
Residual Heat Indicator	Yes (displays "H")

Frequently Asked Questions - AIFZ5600 ASPES

How do I start cooking on the AIFZ5600?

Touch the ON/OFF switch. Place a suitable pan on a cooking zone. Touch the zone selection control; the indicator will flash. Then use the power level slider to choose a heat setting. If no selection is made within 1 minute, the hob will switch off automatically.

What types of cookware are suitable for this induction hob?

Only cookware with a magnetic base is suitable. Look for the induction symbol or perform a magnet test. Pans must have a flat, smooth base with minimum diameter of 120mm. Avoid pans with jagged edges or curved bases. Materials like pure stainless steel, aluminum, copper, glass, ceramic, and earthenware are not suitable unless they have a magnetic layer.

What does the 'H' symbol mean on the display?

The 'H' symbol indicates that the cooking zone is hot (residual heat). It will disappear when the surface has cooled to a safe temperature. Do not touch the zone until it disappears.

How do I use the Boost function?

Select the cooking zone and touch the Booster key 'B'. The display will show 'P' for Boost. Boost operates for a maximum of 5 minutes, after which the zone returns to level 9. To cancel, touch the Booster key again or slide the power level down.

How can I lock the controls to prevent accidental use?

Touch the keylock control (padlock icon). The timer indicator will show 'Lo'. To unlock, touch and hold the keylock control for 3 seconds. The ON/OFF control remains active even when locked for emergency shutdown.

Why does the hob turn off unexpectedly?

Possible reasons: Auto shutdown triggered if a zone is left on for too long (varies by power level), or an error code is displayed (e.g., E2, E3, E4). Check if there is a power outage or if the controls are locked. Refer to the error code table in the manual.

How should I clean the glass surface?

For everyday soiling, switch off the hob, apply a specialized glass cooktop cleaner while the surface is warm (not hot), rinse, and wipe dry. For burnt-on spills, use a razor scraper at a 30° angle. Avoid abrasive scourers. Never use a steam cleaner.

Can I install this hob above an oven?

Yes, but the oven must have a built-in cooling fan. Ensure a minimum safety distance of 760mm between the hob and any cupboard above. The work surface must be made of heat-resistant material and at least 30mm thick.

What do error codes E2/E3 mean?

Error codes E2 and E3 indicate an abnormal supply voltage. Check that the power supply is stable and within the specified range (220-240V~). If the problem persists, contact a qualified technician.

How do I use the Flexi Area?

Press the Flexi area selection key. The display shows '='. The area can be used as a single large hotplate for rectangular pans or as two independent zones. Place cookware correctly over the area; only the covered inductors will activate. Slide the power level to adjust heat.

USER MANUAL AIFZ5600 ASPES

Electrical Shock Hazard

• Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it.
• Connection to a good earth wiring system is essential and mandatory.
• Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
• Alterations to the domestic wiring system must only be made by a qualified electrician.
• Failure to follow this advice may result in electrical shock or death.

Cut Hazard

• Take care - panel edges are sharp.
- Failure to use caution could result in injury or cuts.

Important safety instructions

• Read these instructions carefully before installing or using this appliance.
• No combustible material or products should be placed on this appliance at any time.
• Please make this information available to the person responsible for installing the appliance as it could reduce your installation costs.
• In order to avoid a hazard, this appliance must be installed according to these instructions for installation.

- This appliance is to be properly installed and earthed only by a suitably qualified person.

- This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply.

- WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.

- Failure to install the appliance correctly could invalidate any warranty or liability claims.

- Regarding the details of installation, thanks to refer to the section .

Operation and maintenance Electrical Shock Hazard

• Do not cook on a broken or cracked cooktop. If the cooktop surface is break or crack, switch the appliance off immediately at the mains power supply (wall switch) and contact a qualified technician.
• Switch the cooktop off at the wall before cleaning or maintenance.
• Failure to follow this advice may result in electrical shock or death.

Health Hazard

- This appliance complies with electromagnetic safety standards.

Hot Surface Hazard

• During use, accessible parts of this appliance will become hot enough to cause burns.
• Do not let your body, clothing or any item other than suitable cookware contact the ceramic glass until the surface is cool.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot
• Children less than 8 years of age shall be kept away unless continuously supervised.
• Handles of saucepans may be hot to touch. Check saucepan handles do not overhang other cooking zones that are on. Keep handles out of reach of children.
• Failure to follow this advice could result in burns and scalds.

Cut Hazard

- The razor-sharp blade of a cooktop scraper is exposed when the safety cover is retracted. Use with extreme care and always store safely and out of reach of children.

- Failure to use caution could result in injury or cuts.

Important safety instructions

• Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite.
• Never use your appliance as a work or storage surface.
• Never leave any objects or utensils on the appliance.
• Never use your appliance for warming or heating the room.
• After use, always turn off the cooking zones and the cooktop as described in this manual (i.e. by using the touch controls).

• Do not allow children to play with the appliance or sit, stand, or climb on it.

• Do not store items of interest to children in cabinets above the appliance. Children climbing on the cooktop could be seriously injured.

• Do not leave children alone or unattended in the area where the appliance is in use.
• Children or persons with a disability which limits their ability to use the appliance should have a responsible and competent person to instruct them in its use. The instructor should be satisfied that they can use the appliance without danger to themselves or their surroundings.
• Do not repair or replace any part of the appliance unless specifically recommended in the manual. All other servicing should be done by a qualified technician.
• Do not use a steam cleaner to clean your cooktop.
• Do not place or drop heavy objects on your cooktop.
• Do not stand on your cooktop.
• Do not use pans with jagged edges or drag pans across the glass surface as this can scratch the glass.
• Do not use scourers or any other harsh abrasive cleaning agents to clean your cooktop, as these can scratch the ceramic glass.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• This appliance is intended to be used in a domestic household environment only! Commercial use of any kind is not covered under the manufacturer's warranty!

• WARNING: The appliance and its accessible parts become hot during use.

• Care should be taken to avoid touching heating elements.

• Children less than 8 years of age shall be kept away unless continuously supervised.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

- Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

- WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.

- WARNING: Danger of fire: do not store items on the cooking surfaces.

- WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock, for hob surfaces of glass-ceramic or similar material which protect live parts.

• A steam cleaner is not to be used.

- The appliance is not intended to be operated by means of an external timer or separate remote-control system.

- CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously.

- Power cord can’t accessible after installation.

Congratulations on the purchase of your new hob. We recommend that you spend some time to read this Instruction / Installation Manual in order to fully understand how to install correctly and operate it.

Read all the safety instructions carefully before use and keep this Instruction / Installation Manual for future reference.

Product Overview

Top View

AIFZ5600

		g^*	P^*
L		1800W	2400W
		3000W	3600W

R. max. 3000 / 3600 W zone

1. Control panel

AI3600SB

1. Single zone max. 1800 / 2100 W zone
2. Single zone max. 1200 / 1500 W zone
3. Single zone max. 3000 / 4000 W zone
4. Control panel
5. Glass ceramic

AI3600

1. max. 1800 W zone
2. max. 1400 W zone
3. max. 2300 / 3000 W zone
4. Control panel

AI2300

1. max. 1800/2100 W zone
2. max. 1200/1500 W zone
3. Control panel

The Control Panel
AIFZ5600

1. ON/OFF switch
2. Select power level
3. Setting the timer

4. Childlock

5. Select the cooking zone

6. Flexi area/Booster
7. Stop & Go
8. Pan sensor indicator

Product Information

The induction hob can meet different kinds of cuisine demands because of resistance wire heating, micro-computerized control and multi-power selection, really the optimal choice for modern families.

The hob centers on customers and adopts personalized design. The hob has safe and reliable performances, making your life comfortable and enabling to fully enjoy the pleasure from life.

A Word on Induction Cooking

Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by electromagnetic vibrations generating heat directly in the pan, rather than indirectly through heating the glass surface. The glass becomes hot only because the pan eventually warms it up.

Diagram of a steam locomotive with wheels and motion indicators, no text or symbols present

iron pot

magnetic circuit ceramic glass plate induction coil induced currents

Before using your New Hob

• Read this guide, taking special note of the ‘Safety Warnings’ section.
• Remove any protective film that may still be on your Induction hob.

Using the Touch Controls

• The controls respond to touch, so you don't need to apply any pressure.
• Use the ball of your finger, not its tip.
• You will hear a beep each time a touch is registered.
  • Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth) covering them. Even a thin film of water may make the

controls difficult to operate.

Choosing the right Cookware

- Only use cookware with a base suitable for induction cooking. Look for the induction symbol on the packaging or on the bottom of the pan.

- You can check whether your cookware is suitable by carrying out a magnet test. Move a magnet towards the base of the pan. If it is attracted, the pan is suitable for induction.

• If you do not have a magnet:
1. Put some water in the pan you want to check. 2. Follow the steps under 'To start cooking'. 3. If ∪ does not flash in the display and the water is

Simple line drawing of a cooking pot with a U-shaped magnet attached (no text or symbols)

heating, the pan is suitable.

• Cookware made by the following materials is not suitable: pure stainless steel, aluminum or copper without a magnetic base, glass, wood, porcelain, ceramic, and earthenware.

Size of burner (mm)	The minimum cookware (diameter /mm)
160	120
190*90	120
180	140
210	160
280	220
320	180
Zone Flexible 390*210	250

The minimum diameter of cookware is 120mm. If diameter is smaller than it, it might cannot be detected.

Do not use cookware with jagged edges or a curved base.

Three identical cooking pots with crossed-out X marks, no text or symbols present

Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking zone. Always centre your pan on the cooking zone.

Four identical cooking pots with crossed-out X marks, shown in sequence (no text or symbols)

Always lift pans off the ceramic glass – do not slide, or they may scratch the glass.

Two cooking pots with arrows indicating opposing pressure directions (no text or symbols)

Using your Hob

To start cooking

- After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that the hob has entered the state of standby mode.

1. Touch the ON/OFF Ⓞ switch. all the indicators show “-”

1. Place a suitable pan on the cooking zone that you wish to use. Make sure the bottom of the pan and the surface of the cooking zone is clean and dry.

Line drawing of a cooking pot on a stand (no text or symbols)

1. Touching the heating zone selection control and an indicator next to the key will flash, then select a heating setting by touching the power level control.

Hand holding a credit card with a horizontal line (no text or symbols)

Simple line drawing of a hand pointing at a horizontal bar with tick marks (no text or symbols)

Note:

• If you don't choose a heat setting within 1 minute, the Induction hob will automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.

When you have finished cooking

1. Touching the heating zone selection that you wish to switch off.

Hand holding a credit card with a horizontal line symbol (no text or numbers present)

Turn the cooking zone off by slide down to"0". Make sure the display shows"0".

Turn the cooking zone off directly by slide down to "0".

Make sure the display shows "0".

1. Turn the whole cooktop off by touching the ON/OFF control.

1. Beware of hot surfaces

“H” will show which means cooking zone is too hot to touch. It will disappear when the surface has cooled down to a safe temperature. It can also be used as an energy saving function if you want to heat further pans, use the hotplate that is still hot.

Using Boost function

Activate the boost function

1. Select the zone with boost function.

1. Touching the booster key “B” when display is flashing, power level indication shows “P”.

Cancel Boost function

Select the zone with boost function.

Simple line drawing of a hand holding a square with equals sign (no text or symbols)

Touching the booster key “P” or slide down the power level to cancel the Boost function, and select the level you want to set.

Or

- Boost function can only last for 5 minutes, after that the zone will go to level 9 automatically.

Using Flexi Area(AIFZ5600)

This function allows the cooking zone to be used as a single hotplate or as two independent hotplates. It is perfect for oval, rectangular and elongated pans or more than one standard pan at the same time.

It consists of four inductors that work independently of each other. If using the flexible cooking zone, only the area that is covered by cookware is activated

Advice on using cookware

To ensure that the cookware is detected and heat is distributed evenly, correctly centre the cookware:

As a single hotplate

As two independent hotplates

* The corresponding pan sensor indicators will bright when cookware detected.

Activate the Flexi Area

1. Press Flexi area selection, display will show “=” and the corresponding power level.

1. Sliding the power level selector to select the level you want.

* Power detection will only detect the cookware once. If you move the cookware or place another cookware during cooking, you have to start from Step 1 to redetect cookware and select the power level.

Cancel the Flexi Area

1. Touch one of the cooking zone selections on the flexi area. Display “=” will turn to “-” and “0”. Now the flexi area is cancelled.

Using Stop & Go function(AIFZ5600)

Cooking can be interrupted briefly with the STOP button.

1. Press the Stop & Go key. All display will show “//”.

2. Press the Stop & Go key again, to cancel the pause function.

Locking the Controls

• You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are disabled.

To lock the controls

Touch the keylock control ☐. The timer indicator will show "Lo".

To unlock the controls

1. Make sure the hob is turned on.
2. Touch and hold the keylock control ☐ for 3 seconds.
3. You can now start using your hob.

When the hob is in lock mode, all the controls are disabled except the ON/OFF, you can always turn the hob off with the ON/OFF control in an emergency, but you shall unlock the hob first in the next operation.

Residual Heat

Warning

When the hob has been operating for some time, there will be some residual heat. The letter “H” appears to warn you to keep away from it.

Auto Shutdown

Safety feature of the hob is auto shut down. This occurs whenever you forget to switch off a cooking zone. The default shutdown times are shown in the table below:

Power level 1 2 3 4 5 6 7 8 9
Default working timer (hour) 8		8 8	4 4	4 2 2	2

Using the Timer

You can use the timer in two different ways:

• You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up.
• You can use it as cut-off timer to turn one or more cooking zones off after time is up.

* You can set the timer up to 99 minutes.

Using the Timer as a Minute Minder

1. Make sure the cooktop is turned on. And zone slection key is not activated (zone indication ‘-’ is not blinking).

Note: You can set minute minder before or after cooking zone power setting finished.

Touch the timer control, the “00” will show in the timer display and the “0” flashes.(The model AIFZ5600 should touch the timer selection directly.)

1. Set the time by touching “+”“-”.

1. Touch timer control again, the "0" will flash.

1. Set the time by touching the "-" or "+" control (e.g.9), now the timer you set is 95 minutes.

1. When the time is set, it will begin to count down immediately. The display will show the remaining time.

6.

1. Buzzer will bips for 30 seconds and the timer indicator shows “- - ” when the setting time finished.

Using the timer to switch off one or more cooking zones

1. Touching the heating zone selection control that you want to set the timer for. (If you want to set the timer for Flexi area, you need to touch both heating zone

selection at the same time.)

1. Touch timer control, the "00" will show in the timer display. And the "0" flashes.

2. Set the time by touching the slider control. (e.g.5)

1. Touch timer control again, the "0" will flash.

1. Set the time by touching the slider control (e.g.2), now the timer you set is 95 minutes.

NOTE: There will be a red dot in the right bottom corner of power level indication which indicating that zone is selected.

1. When cooking timer expires, the corresponding cooking zone will be switch off automatically.

Note: Other cooking zones will keep operating if they are turned on previously.

If the timer is set on more than one zone:

1. When you set timer for several cooking zones, red dots of the relevant cooking zones are indicated. The timer display shows the min. timer. The dot of the corresponding zone blinks.

1. Once the countdown timer expires, the corresponding zone will switch off. Then it will show the new min. timer and the dot of corresponding zone will flash.

Note: Touch the heating zone selection control, the corresponding timer will be shown in the timer indicator.

Cancelled the timer

1. Touching the heating zone selection control that you want to cancel the timer.

1. Touching the timer control, the indicator will flash.

1. Touching the timer key “-” to set the timer to "00", the timer is cancelled.

Cooking Guidelines

Take care when frying as the oil and fat heat up very quickly, particularly if you're using Boost. At extremely high temperatures oil and fat will ignite spontaneously and this presents a serious fire risk.

Cooking Tips

• When food comes to the boil, reduce the power setting.
  • Using a lid will reduce cooking times and save energy by retaining the heat.
• Minimise the amount of liquid or fat to reduce cooking times.
• Start cooking on a high setting and reduce the setting when the food has heated through.

Simmering, cooking rice

• Simmering occurs below boiling point, at around 85^ C, when bubbles are just rising occasionally to the surface of the cooking liquid. It is the key to delicious soups and tender stews because the flavours develop without overcooking the food. You should also cook egg-based and flourthickened sauces below boiling point.
• Some tasks, including cooking rice by the absorption method, may require a setting higher than the lowest setting to ensure the food is cooked properly in the time recommended.

Searing steak

To cook juicy flavoursome steaks:

1. Stand the meat at room temperature for about 20 minutes before cooking.
2. Heat up a heavy-based frying pan.
3. Brush both sides of the steak with oil. Drizzle a small amount of oil into the hot pan and then lower the meat onto the hot pan.
4. Turn the steak only once during cooking. The exact cooking time will depend on the thickness of the steak and how cooked you want it. Times may vary from about 2 – 8 minutes per side. Press the steak to gauge how cooked it is – the firmer it feels the more ‘well done’ it will be.
5. Leave the steak to rest on a warm plate for a few minutes to allow it to relax and become tender before serving.

For stir-frying

1. Choose a ceramic compatible flat-based wok or a large frying pan.
2. Have all the ingredients and equipment ready. Stir-frying should be quick. If cooking large quantities, cook the food in several smaller batches.
3. Preheat the pan briefly and add two tablespoons of oil.
4. Cook any meat first, put it aside and keeps warm.
5. Stir-fry the vegetables. When they are hot but still crisp, turn the cooking zone to a lower setting, return the meat to the pan and add your sauce.
6. Stir the ingredients gently to make sure they are heated through.
7. Serve immediately.

Heat Settings

Heat setting	Suitability
1 - 2	·delicate warming for small amounts of food·melting chocolate, butter, and foods that burn quickly·gentle simmering·slow warming
3 - 4	·reheating·rapid simmering·cooking rice
5 - 6	·pancakes
7 - 8	·sauteing·cooking pasta
9	·stir-frying·searing·bringing soup to the boil·boiling water

Care and Cleaning

What?	How?	Important!
Everyday soiling on glass (fingerprints, marks, stains left by food or non-sugary spillovers on the glass)	1. Switch the power to the cooktop off.2. Apply a cooktop cleaner while the glass is still warm (but not hot!)3. Rinse and wipe dry with a clean cloth or paper towel.4. Switch the power to the cooktop back on.	·When the power to the cooktop is switched off, there will be no ‘hot surface’ indication but the cooking zone may still be hot! Take extreme care.·Heavy-duty scourers, some nylon scourers and harsh/abrasive cleaning agents may scratch the glass. Always read the label to check if your cleaner or scourer is suitable.·Never leave cleaning residue on the cooktop: the glass may become stained.
Boilovers, melts, and hot sugary spills on the glass	Remove these immediately with a fish slice, palette knife or razor blade scraper suitable for ceramic glass cooktops, but beware of hot cooking zone surfaces:1. Switch the power to the cooktop off at the wall.2. Hold the blade or utensil at a 30° angle and scrape the soiling or spill to a cool area of the cooktop.3. Clean the soiling or spill up with a dish cloth or paper towel.4. Follow steps 2 to 4 for ‘Everyday soiling on glass’ above.	·Remove stains left by melts and sugary food or spillovers as soon as possible. If left to cool on the glass, they may be difficult to remove or even permanently damage the glass surface.·Cut hazard: when the safety cover is retracted, the blade in a scraper is razor-sharp. Use with extreme care and always store safely and out of reach of children.
Spillovers on the touch controls	1. Switch the power to the cooktop off.2. Soak up the spill3. Wipe the touch control area with a clean damp sponge or cloth.4. Wipe the area completely dry with a paper towel.5. Switch the power to the cooktop back on.	·The cooktop may beep and turn itself off, and the touch controls may not function while there is liquid on them. Make sure you wipe the touch control area dry before turning the cooktop back on.

Hints and Tips

Problem Possible causes What to do
The cooktop cannot Be turned on.	No power.	Make sure the cooktop is connected to the power supply and that it is switched on.Check whether there is a power outage in your home or area. If you've checked everything and the problem persists, call a qualified technician.
The touch controls are unresponsive.	The controls are locked.	Unlock the controls. See section ‘Using your ceramic cooktop’ for instructions.
The touch controls are difficult to operate.	There may be a slight film of water over the controls or you may be using the tip of your finger when touching the controls.	Make sure the touch control area is dry and use the ball of your finger when touching the controls.
The glass is being scratched.	Rough-edged cookware.Unsuitable, abrasive scourer or cleaning products being used.	Use cookware with flat and smooth bases. See ‘Choosing the right cookware’.See ‘Care and cleaning’.
Some pans make crackling or clicking noises.	This may be caused by the construction of your cookware (layers of different metals vibrating differently).	This is normal for cookware and does not indicate a fault.
The induction hob makes a low humming noise when used on a high heat setting.	This is caused by the technology of induction cooking.	This is normal, but the noise should quieten down or disappear completely when you decrease the heat setting.
Fan noise coming from the induction hob.	A cooling fan built into your induction hob has come on to prevent the electronics from overheating. It may continue to run even after you’ve turned the induction hob off.	This is normal and needs no action.Do not switch the power to the induction hob off at the wall while the fan is running.
Pans do not become hot and appears in the display.	The induction hob cannot detect the pan because it is not suitable for induction cooking.The induction hob cannot detect the pan because it is too small for the cooking zone or not properly centered on it.	Use cookware suitable for induction cooking. See section ‘Choosing the right cookware’.Centre the pan and make sure that its base matches the size of the cooking zone.
The induction hob or a cooking zone has turned itself off unexpectedly, a tone sounds and an error code is displayed (typically alternating with one or two digits in the cooking timer display).	Technical fault.	Please note down the error letters and numbers, switch the power to the induction hob off at the wall, and contact a qualified technician.

Failure Display and Inspection

If an abnormality comes up, the induction hob will enter the protective state automatically and display corresponding protective codes:

Problem Possible causes What to do
E4/E5	Temperature sensor failure Please contact the supplier.
E7/E8	Temperature sensor of the IGBT failure.	Please contact the supplier.
E2/E3	Abnormal supply voltage Please inspect whether power supply is normal. Power on after the power supply is normal.
E6/E9	Bad induction hob heat radiation	Please restart after the induction hob cools down.

The above are the judgment and inspection of common failures.

Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction hob.

Technical Specification

Induction Hob AIFZ5600 AI3600SB AI3600 AI2300
Cooking Zones 3 Zones 3 Zones 3 Zones 2 Zones
Supply Voltage 220-240V~	50/60Hz	220-240V~	220-240V~	220-240V~
		50/60Hz	50/60Hz	50/60Hz
Installed Electric Power 7200W 7200W 6200W 3600W
Product Size D×W×H(mm)	590×520×65	590×520×58	590×520×58	290×520×58
Building-in Dimensions A×B (mm)	560×490	560×490	560×490	270×490

Weight and Dimensions are approximate. Because we continually strive to improve our products we may change specifications and designs without prior notice.

Installation

Selection of installation equipment

• Cut out the work surface according to the sizes shown in the drawing.
- For the purpose of installation and use, a minimum of 50mm space shall be preserved around the hole.
- Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant work surface material to avoid larger deformation caused by the heat radiation from the hotplate. As shown below:

Warning: The work surface material must use the impregnated wood or other insulation material.

L(mm) W(mm)			H(mm) D(mm) A(mm) B(mm) X(mm)
AIFZ5600	590 520	65 54 560	490 50 min
AI3600SB	590 520	58 54 560	490 50 min
AI3600	590 520	58 54 560	490 50 min
AI2300	290 520	58 54 270	490 50 min

Under any circumstances, make sure the hob is well ventilated and the air inlet and outlet are not blocked. Ensure the hob is in good work state. As shown below Note: The safety distance between the hotplate and the cupboard above the hotplate should be at least 760mm.

A(mm) B(mm) C(mm) D E
760 50 min 20 min Air intake Air exit 5mm

Before you install the hob, make sure that

• The work surface is square and level, and no structural members interfere with space requirements.
• The work surface is made of a heat-resistant material.
• If the hob is installed above an oven, the oven has a built-in cooling fan.
• The installation will comply with all clearance requirements and applicable standards and regulations.
• A suitable isolating switch providing full disconnection from the mains power supply is incorporated in the permanent wiring mounted and positioned to comply with the local wiring rules and regulations.
• The isolating switch must be of an approved type and provide a 3mm air gap contact separation in all poles (or in all active [phase] conductors if the local wiring rules allow for this variation of the requirements).
• the isolating switch will be easily accessible to the customer with the hob installed
• you consult local building authorities and by-laws if in doubt regarding installation
• You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces surrounding the hob.

When you have installed the hob, make sure that

• The power supply cable is not accessible through cupboard doors or drawers.
  • There is adequate flow of air from outside the cabinetry to the base of the hob.
• If the hob is installed above a drawer or cupboard space, a thermal protection barrier is installed below the base of the hob.
• The isolating switch is easily accessible by the customer.

Before locating the fixing brackets

The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from the hob.

Locating the fixing brackets

• The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from the hob.
• Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after installation.
• Adjust the bracket position to suit for different work surface's thickness.

AI3600SB/AI3600

Isometric technical drawing of a mechanical or electronic component with grid and mounting features (no text or symbols)

AIFZ5600

Isometric technical drawing of a rectangular electronic device with two circular components and mounting holes (no text or symbols)

AI2300

Isometric line drawing of a rectangular frame with two corner clips and a base plate (no text or symbols)

Cautions

• The hob must be installed by qualified personnel or technicians. We have professionals at your service. Please never conduct the operation by yourself.
• The hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.
• The hob shall be installed such that better heat radiation can be ensured to enhance its reliability.
• The wall and induced heating zone above the work surface shall withstand heat.
• To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
• A steam cleaner is not to be used.
• This ceramic can be connected only to a supply with system impedance no more than 0.427 ohm. In case necessary, please consult your supply authority for system impedance information.

Connecting the hob to the mains power supply

The power supply should be connected in compliance with the relevant standard, or a single-pole circuit breaker. The method of connection is shown below.

AIFZ5600

AI3600SB/AI3600

• If the cable is damaged or needs replacing, this should be done by an after-sales technician using the proper tools, so as to avoid any accidents.
• If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must be installed with a minimum gap of 3mm between the contacts.
• The installer must ensure that the correct electrical connection has been made and that it complies with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and only replaced by a proper qualified person.

Symbol of a trash bin crossed with a diagonal line, no text or numbers present

DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

This appliance is labeled in compliance with European directive 2002/96/EC for Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is disposed of correctly, you will help prevent any possible damage to the environment and to human health, which might otherwise be caused if it were disposed of in the wrong way.

The symbol on the product indicates that it may not be treated as normal household waste. It should be taken to a collection point for the recycling of electrical and electronic goods.

This appliance requires specialist waste disposal. For further information regarding the treatment, recover and recycling of this product please contact your local council, your household waste disposal service, or the shop where you purchased it.

For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

V 2022.12 / 1.0

aspes

Diagram of a conveyor belt system with steam rising, showing motion arrows and control buttons (no text or symbols)

Olla de hierro

Simple line drawing of a cooking pot with crossed-out X marks (no text or symbols)

Simple line drawing of a cooking pot with crossed-out X symbol (no text or labels)

Symbolic illustration of a cooking pot with crossed arrows indicating pressure or resistance (no text or labels)

Simple line drawing of a hand pressing a button above a cooking pot on a stand (no text or symbols)

Nota:

Two hand gestures pointing at a card (no text or symbols present)

Two hand gestures pointing at a card (no text or symbols present)

Two hand gestures pointing at a credit card (no text or symbols present)

Three technical diagrams showing top-down views of circular components in different configurations (no text or labels)

Four identical diagrams showing a central circular object with four protruding ports, arranged in a 2x2 grid (no text or symbols)

	L(mm)	W(mm)	H(mm)	D(mm)	A(mm)	B(mm)	X(mm)
AIFZ5600	590	520	65	54	560	490	50 min
AI3600SB	590	520	58	54	560	490	50 min
AI3600	590	520	58	54	560	490	50 min
AI2300	290	520	58	54	270	490	50 min

Isometric line drawing of a rectangular frame with mounting brackets and corner fasteners (no text or symbols)

Precauciones

Symbol of a trash bin with crossed lines indicating no waste or discharge (no text or labels)