Ani-Motion - Machine à effets Adj - Free user manual and instructions
Find the device manual for free Ani-Motion Adj in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Effect Machine |
| Brand | Adj |
| Model | Ani-Motion |
| Dimensions (L x W x H) | 15.7 x 10.2 x 8.7 inches (400 x 260 x 220 mm) |
| Weight | 12.3 lbs (5.6 kg) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 300W |
| Control Protocols | DMX512, Manual, Remote |
| DMX Channels | 2, 4, or 6 channels |
| Fluid Type | Water-based fog fluid |
| Fluid Tank Capacity | 1.3 gallons (5 liters) |
| Output Volume | Up to 5000 cubic feet per minute |
| Warm-up Time | 3 minutes |
| Motorized Pan/Tilt | Pan: 180°, Tilt: 90° |
| Housing Material | Aluminum and steel |
| Cooling System | Fan cooling |
| Maintenance & Cleaning | Clean exterior with damp cloth; flush fluid system periodically with distilled water. |
| Safety Features | Thermal overload protection, auto shut-off when fluid empty. |
| Spare Parts & Repairability | Heater, pump, fan, motor, and control board available; user-replaceable fuses. |
| General Information | Intended for professional stage use. Always place on a stable surface. Keep away from flammable materials. |
Frequently Asked Questions - Ani-Motion Adj
What type of fluid should I use with the Adj Ani-Motion?
Use only water-based fog fluid specifically designed for fog machines. Never use oil-based fluids as they can damage the heater.
How do I connect the Ani-Motion to a DMX controller?
Connect a standard DMX cable from your controller to the DMX input on the machine. Set the DMX address using the DIP switches or menu interface.
The machine is not producing fog. What should I check?
Ensure the fluid tank is filled, the machine is powered on, and the warm-up cycle is complete. Check for clogged nozzles or empty fluid.
How often should I clean the Ani-Motion?
Clean the exterior after every use. For the fluid system, flush with distilled water after every 20 hours of use to prevent residue buildup.
Can I control the fog output remotely?
Yes, the Ani-Motion can be controlled via DMX, manual control panel, or optional wired remote controller.
What is the power consumption of the Ani-Motion?
The power consumption is approximately 300 watts. Always use a grounded outlet rated for at least 10 amps.
Does the Ani-Motion have a pan/tilt function?
Yes, the Ani-Motion features motorized pan (180°) and tilt (90°) to direct the fog output.
How do I replace the fuse?
Disconnect power, locate the fuse holder near the power input, remove the faulty fuse and replace with one of the same rating (T5A/250V).
What is the warm-up time?
The heater takes approximately 3 minutes to reach operating temperature. The indicator light will turn green when ready.
Can I use the Ani-Motion outdoors?
Yes, but only in dry weather conditions. Protect from rain and moisture. Ensure the machine is placed on a stable, level surface.
User questions about Ani-Motion Adj
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Machine à effets in PDF format for free! Find your manual Ani-Motion - Adj and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ani-Motion by Adj.