VK7920NHAQY - Vacuum Cleaner LG - Free user manual and instructions

Product Type	Canister Vacuum Cleaner
Bagless	Yes (Cyclonic Technology)
Suction Power	2000 W (variable)
Dust Capacity	1.5 L
Filtration System	HEPA H13 washable filter
Cord Length	8 m (automatic rewind)
Operating Radius	12 m
Noise Level	80 dB(A)
Weight	5.5 kg
Dimensions (L x W x H)	400 x 280 x 320 mm
Power Cord Type	Automatic rewind
Floor Types	Hard floors, carpets, tiles
Accessories Included	Floor nozzle, crevice tool, dusting brush, upholstery tool
Variable Speed Control	Electronic suction control on handle
Maintenance	Clean dust container, wash filters regularly
Repairability	Spare parts available (filters, brush, motor)
Safety Features	Thermal motor protection, auto-shutoff

Frequently Asked Questions - VK7920NHAQY LG

How do I clean the HEPA filter?

Turn off and unplug the vacuum. Remove the dust container and take out the HEPA filter. Tap it gently to remove dust or wash with cold water if washable. Let it dry completely for 24 hours before reinstalling.

Why is my vacuum losing suction?

Check if the dust container is full, the filter is clogged, or the hose is blocked. Also ensure the floor nozzle is not obstructed. Clean or replace the filter if necessary.

How do I replace the dust container?

Press the release button on top of the dust container and pull it out. Empty it and rinse with water if needed. Dry thoroughly before reinserting until it clicks.

Can I use the vacuum on hardwood floors?

Yes, the vacuum has a floor nozzle suitable for hard floors. You can also adjust the suction power to prevent scratching.

What does the automatic cord rewind do?

Press the cord rewind button on the back of the vacuum to retract the power cord automatically. Always hold the plug while rewinding to avoid whip.

How often should I clean the filters?

Clean the pre-motor filter every month and the HEPA filter every 3 months, or more often if used frequently or in dusty areas.

The vacuum overheats and shuts off. What should I do?

Overheating protection is normal. Turn off the vacuum, unplug it, and let it cool for at least 30 minutes. Check for blockages and clean the filters before restarting.

Where can I buy replacement parts?

Genuine LG replacement parts are available from authorized service centers and online retailers. Check the user manual for part numbers.

How do I use the crevice tool?

Attach the crevice tool to the end of the hose or wand. Use it to clean tight spaces like corners, between cushions, and along baseboards.

Is the vacuum suitable for pet hair?

Yes, the cyclonic suction and brush nozzle are effective for removing pet hair from carpets and upholstery. Clean the brush roll regularly to prevent tangles.

USER MANUAL VK7920NHAQY LG

This information contains important instructions for the safe use and maintenance of the vacuum cleaner. Especially, please read all of the information on page 4, 5, 6 for your safety. Please keep this manual in an easily accessible place and refer to it anytime.

YENI TIP CYCLONE ELEKTRIKLI SÜPÜRGE

Important safety instructions 4\~6

Assembling vacuum cleaner 10\~11

Operating vacuum cleaner 12

Using carpet and floor nozzle/ hard floor nozzle 13

Using 2 in 1 nozzle 15

Using accessory nozzles 16

Cleaning dust tank 23

Cleaning exhaust filter 25

What to do if your vacuum cleaner does not work 26

What to do when suction power decreases 26

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire, electric shock, personal injury, or damage when using the vacuum cleaner. This guide do not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand. This appliance complies with the following EC Directives :-2006/95/EC Low Voltage Directive -2004/108/EC EMC Directive.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "WARNING" or "CAUTION."

These words mean:

WARNING

This symbol will alert you to hazards or unsafe practices which could cause serious bodily harm or death.

CAUTION

This symbol will alert you to hazards or unsafe practices which could cause bodily injury or property damage.

WARNING

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by LG Electronics Service Agent in order to avoid a hazard
4. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

• Do not plug in if control knob is not in OFF position. Personal injury or product damage could result.
• Keep children away and beware of obstructions when rewinding the cord to prevent personal injury The cord moves rapidly when rewinding.
• Disconnect electrical supply before servicing or cleaning the unit or when cleaner is not in use. Failure to do so could result in electrical shock or personal injury.
• Do not use vacuum cleaner to pick up anything that is burning or smoking such as cigarettes, or hot ashes. Doing so could result in death, fire or electrical shock.
• Do not vacuum flammable or explosive substances such as gasoline, benzene, thinners, propane (liquids or gases).

The fumes from these substances can create a fire hazard or explosion. Doing so could result in death or personal injury.

• Do not handle plug or vacuum cleaner with wet hands.
  Doing so could result in death or electrical shock.
• Do not unplug by pulling on cord. Doing so could result in product damage or electrical shock. To unplug, grasp the plug, not the cord.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.

Failure to do so could result in electrical shock or personal injury.

- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.

Failure to do so could result in electrical shock or personal injury or fire or product damage.

- The hose contains electrical wires. Do not use it if it is damaged, ccut or punctured.

Failure to do so could result in death, or electrical shock.

- Do not allow to be used as toy. Close attention is necessary when used by or near children.

Personal injury or product damage could result.

• Do not use the vacuum cleaner if the power cord or plug is damaged or faulty.
  Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard.
• Do not use vacuum cleaner if it has been under water. Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard.
• Do not continue to vacuum if any parts appear missing or damaged.

Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard.

- Do not use an extension cord with this vacuum cleaner.

Fire hazard or product damage could result.

• Using proper voltage.

Using improper voltage may result in damage to the motor and possible injury to the user. Proper voltage is listed on the bottom of vacuum cleaner.

- Turn off all controls before unplugging.

Failure to do so could result in electrical shock or personal injury.

- Do not change the plug in any way.

Failure to do so could result in electrical shock or personal injury or product damage. Doing so result in death. If plug does not fit, contact a qualified electrician to install the proper outlet.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Repairs to electrical appliances may only be performed by qualified service engineers.

Improper repairs may lead to serious hazards for the user.

- Do not put fingers near the gear.

Failure to do so could result in personal injury.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

• Do not put any objects into openings.
  Failure to do so could result in product damage.
• Do not use with any opening blocked: keep free of dust, lint, hair, and anything that may reduce air flow. Failure to do so could result in product damage.
• Do not use vacuum cleaner without the dust tank and/or filters in place.
  Failure to do so could result in product damage.
  • Always clean the dust bin after vacuuming carpet cleaners or fresheners, powders and fine dust. These products clog the filters, reduce airflow and can cause damage to the cleaner. Failure to clean the dust bin could cause permanent damage to the cleaner.
• Do not use vacuum cleaner to pick up sharp hard objects, small toys, pins, paper clips, etc. They may damage the cleaner or dust bin.
• Store the vacuum cleaner indoors. Put the vacuum cleaner away after use to prevent tripping over it.
• The vacuum cleaner is not intended to use by young children or infirm people without supervision.
  Failure to do so could result in personal injury or product damage.
• Only use parts produced or recommended by LG Electronics Service Agents.
  Failure to do so could result in product damage.
• Use only as described in this manual. Use only with LG recommended or approved attachments and accessories.
  Failure to do so could result in personal injury or product damage.

• To avoid personal injury and to prevent the machine from falling when cleaning stairs, always place it at the bottom of stairs.
  Failure to do so could result in personal injury or product damage.

• Use accessory nozzles in sofa mode.
  Failure to do so could result in product damage.

• Don't grasp the tank handle when you are moving the vacuum cleaner.
  The vacuum cleaner's body may fall when separating tank and body. Personal injury or product damage could result. You should grasp the carrier handle when you are moving the vacuum cleaner. (Page 22)
• Make sure the filters (exhaust filter and motor safety filter) are completely dry before replacing in the machine.
  Failure to do so could result in product damage.
• Do not dry the filter in an oven or microwave. Failure to do so could result in fire hazard.
• Do not dry the filter in a clothes dryer. Failure to do so could result in fire hazard.
• Do not dry near an open flame. Failure to do so could result in fire hazard.
• Do not use filters that is not dried.
• If the power cord is damaged, it must be replaced by an approved LG Electronics Service Agent to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  Children should be supervised to ensure that they do not play with the appliance.

Thermal protector :

This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner.

Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch. If the vacuum cleaner still does not run, contact a qualified electrician.

How to save Energy

For power saving, please turn the switch off on the body.

Push the telescopic pipe into the nozzle.

Push the fitting pipe on the flexible hose into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner, press the button situated on the fitting pipe, then pull the fitting pipe out of the vacuum cleaner.

How to use Operating vacuum cleaner

③ Park mode Park modu

This is equipped with a pedal which allows you to alter its position according to the type of floor to be cleaned.

- Carpet or rug position

Press the pedal (☐) to lower brush.

- Hard floor position (tiles, parquets floor)

Press the pedal ( ) to lift the brush up.

• Cleaning carpet and floor nozzle

- Clean the hole and the brush of the nozzle.

• Efficient cleaning of hard floors (wood, linoleum, etc)

How to use Using 2 in 1 nozzle

Upholstery nozzle is for vacuuming upholstery, mattresses etc.

Dusting brush is for vacuuming picture frames, furniture frames, books and other irregular surfaces.

How to use Using accessory nozzles

Crevice tool is for vacuuming in those nomally hard-to-reach place such as reaching cobwebs or between the cushions of sofa.

Upholstery nozzle is for vacuuming upholstery, mattresses etc. The thread collectors help to pick up the threads and fluff.

Dusting brush is for vacuuming picture frames, furniture frames, books and other irregular surfaces.

Use accessory in the sofa mode.

Uyari

This nozzle picks up even dust inside through beating.

The bottom part can be separated to be cleaned.

Since the bottom does not stick to the surface, vacuuming is easy.

Özellikler

Follow the directions below for properuse.

Kullanımı

Connect the nozzle to the telescopic pipe.

Kurulum

Set the suction power control switch to MAX POWER before vacuuming.

Depending on the type of bedding, handling may be awkward or it may cause a lot of noise.

If this is the case, adjust the suction power control switch to a lower setting.

This Sani Punch nozzle is for effective cleaning of beds and blankets to remove mites and dust.

Lay out the blanket and vacuum it on the bed

It is easier to clean a light blanket or sheetby pushing the nozzle in the direction of the arrow. To increase cleaning efficiency for light blankets, lay on top of a bulky blanket and then clean.

For simple cleaning of the vacuum nozzle, detach the Sani Punch nozzle from the telescopic pipe and attach the crevice tool to vacuum dust.

Since the vibrator inside is composed of precision parts, never disassemble the body.

Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle.

Since removal of the punch bar may cause performance problems, do not warp or remove it.

Attach the bottom plate properly before using. Without this bottom plate, it may not function.

Since this vacuum nozzle has been made exclusively for cleaning beds, blankets and upholstery, use it only for these cleaning purposes.

(Using it to clean the floor may result soiling it or a drop in performance, do not use it for such purposes.)

Follow the instruction below for through washing.

(Do not soak the entire body of the vacuum nozzle in water, it may cause the vibrator to malfunction)

How to use Emptying dust tank

The dust tank needs emptying when the dust tank level reaches the MAX line.

• Turn off the vacuum cleaner and unplug it.
• Grasp the handle of the tank and then press the tank separation button.
• Pull out the dust tank.
• Empty the tank and then assemble the dust tank as shown.

NOTICE

• If suction power decreases after emptying the dust tank, clean the dust tank → next page

Uyari

Moving the vacuum cleaner

- Don't grasp the tank handle when you are moving the vacuum cleaner. The vacuum cleaner's body may fall when separating tank and body. You should grasp the carrier handle when you are moving the vacuum cleaner.

How to use Cleaning dust tank

If suction power decreases after cleaning the dust tank, clean the air filter and the motor safety filter.

→ Next page

Uyari

- Inside of dust separator, air filter, motor safety filter

Kullanım

- Inside of dust separator, air filter, motor safety filter

If suction power decreases after cleaning the dust tank, clean the air filter and the motor safety filter.

The air filter and the motor safety filter are located on the top of the vacuum cleaner as above the figure.

• Open the vacuum cleaner cover by pushing the button.
• Grasp the handle of the dust separator and take out it.
• Open the guide cover by pulling the guide cover lever and remove the dust.
• Open the air filter cover by pushing the air filter cover lever and take out the air filter.
• Separate the motor safety filter from the dust separator.
• Wash the air filter and the motor safety filter.
• Do not wash filters with hot water.
• Dry fully in shade so that moisture is entirely removed.
  • The air filter and the motor safety filter should be cleaned as above the figure.

If filters are damaged, do not use them. In this cases, contact LG Electronics Service Agent.

Wash filters at least Once a month.

Uyari

How to use Cleaning exhaust filter

• The exhaust filter is a reusable filter.
• To clean the exhaust filter, open the exhaust filter cover by pushing the button.
- Separate the exhaust filter by pushing the lever.
- Dust off the exhaust filter.(Do not wash the exhaust filter with water.)
- Insert the exhaust filter lugs into the grooves of the motor housing and push the exhaust filter.
• The exhaust filter should be cleaned at least a year.

Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working.

What to do when suction power decreases

• Turn off the vacuum cleaner and unplug it.
• Check the telescopic pipe, flexible hose and cleaning tool for blockages or obstructions.
• Check that the dust tank is not full. Empty if necessary.
• Check that the exhaust filter is not clogged. Clean the exhaust filter if necessary.
• Check that the air filter and the motor safety filter are not clogged.
  Clean the them if necessary.
• Check the inside of the dust separator.
  Clean the inside of the dust separator if necessary.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
5. Comply with the EEE Directive

LG Electronics Inc. LG Twin Towers 20,

Yeouido-dong, Yeongdeungpo-gu,

Seoul, Korea 150-721

TEL:[phone]