CP-AW100N - Projector HITACHI - Free user manual and instructions
Find the device manual for free CP-AW100N HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ultra-Short Throw Projector |
| Brand | Hitachi |
| Model | CP-AW100N |
| Display System | 3LCD |
| Resolution | WXGA (1280 x 800) |
| Brightness | 2500 lumens |
| Contrast Ratio | 2000:1 |
| Lamp Type | UHP lamp, 215W |
| Lamp Life | Up to 5000 hours (normal mode) |
| Throw Ratio | 0.3:1 |
| Keystone Correction | Vertical |
| Dimensions (W x H x D) | 345 x 85 x 303 mm |
| Weight | 5.5 kg |
| Power Consumption | 250W (typical) |
| Inputs | HDMI, VGA, Composite, Component, Audio |
| Outputs | Audio, Monitor Out |
| Network | RJ45 for control |
| Speaker | 10W mono |
| Safety Features | Auto Power Off, Overheat Protection |
| Maintenance | Filter cleaning every 1000 hours, lamp replacement |
| Spare Parts | Lamp (DT01021), Filter |
| Repairability | User-replaceable lamp and filter |
| General | Interactive pen support (optional), wireless adapter optional |
Frequently Asked Questions - CP-AW100N HITACHI
What is the optimal projection distance for the CP-AW100N?
As an ultra-short throw projector, the CP-AW100N can project a 80-inch image from just 30 cm away from the screen.
How do I replace the lamp?
Turn off the projector and unplug it. Wait for the lamp to cool. Remove the lamp cover on the bottom, unscrew the lamp module, and replace with a new Hitachi DT01021 lamp. Reinstall the cover.
Can I connect a laptop to the projector wirelessly?
Yes, using an optional wireless adapter (e.g., Hitachi WLAN adapter) you can connect wirelessly. Alternatively, use an HDMI or VGA cable.
The projector shows a 'Filter' warning. What should I do?
Clean the air filter. Turn off the projector, remove the filter cover, gently vacuum or wash the filter (let it dry completely), then reinstall and reset the filter timer via the menu.
What is the maximum supported resolution?
The native resolution is WXGA (1280x800). It can accept signals up to 1920x1080 (1080p) and downscale them.
Why is the image not sharp?
Ensure the projector is at the correct distance and focus is adjusted using the focus ring. Also check that the screen is smooth and the input resolution matches the native resolution.
How do I calibrate the interactive pen?
Go to the 'Interactive' menu in the OSD and select 'Calibration'. Follow the on-screen instructions to touch the pen to the calibration points.
The projector turns off automatically. What could be the cause?
This may be due to overheating. Check if the air filter is clogged, ensure ventilation is not blocked, and verify the auto-off timer setting in the menu.
Can I use a 3D content with this projector?
The CP-AW100N does not support 3D projection by default. It is designed for 2D content only.
Where can I download the user manual?
The user manual is available for free download on notice-facile.com and the official Hitachi support website.
User questions about CP-AW100N HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual CP-AW100N - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CP-AW100N by HITACHI.