MX520 - Projector BENQ - Free user manual and instructions
Find the device manual for free MX520 BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DLP Projector |
| Model | MX520 |
| Brand | BenQ |
| Display Technology | Single 0.55" DLP Chip |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 3200 ANSI Lumens |
| Contrast Ratio | 13,000:1 (Full On/Off) |
| Lamp Type | 190W |
| Lamp Life (Normal/Eco) | 4000 / 6000 hours |
| Projection Lens (Focal Length) | F = 2.56 – 2.68, f = 22.04 – 24.14 mm |
| Zoom Ratio | 1.1x |
| Keystone Correction | Vertical ±40° |
| Input Connections | VGA x2, HDMI x1, S-Video x1, Composite x1, Audio 3.5mm |
| Output Connections | VGA out x1, Audio out x1 |
| Control Interface | RS-232C (9-pin), USB Type Mini-B |
| Built-in Speaker | 2W Mono |
| Noise Level (Normal/Eco) | 33 / 30 dB |
| Power Consumption (Normal/Standby) | 270W / <0.5W |
| Dimensions (W x D x H) | 311 x 244 x 104 mm |
| Weight | 2.5 kg |
| Operating Temperature | 0°C to 40°C |
| Lamp Replacement | User-replaceable (see manual for part number) |
| Cleaning Instructions | Use soft, dry cloth for exterior; air filter cleaning every 300 hours |
| Safety Features | Auto shutdown, Kensington lock slot |
| Spare Parts Availability | Lamp, air filter, remote control, power cord |
Frequently Asked Questions - MX520 BENQ
How do I replace the lamp on the BenQ MX520?
Turn off the projector and unplug it. Wait 30 minutes for cooling. Unscrew the lamp cover, remove the old lamp module, and insert the new one. Tighten screws and replace cover. Reset the lamp timer in the OSD menu.
How do I connect my laptop to the BenQ MX520?
Use a VGA or HDMI cable. Connect to the corresponding input on the projector. Select the correct input source via the projector's menu or remote control.
What is the native resolution of the MX520?
The native resolution is XGA (1024x768). It can accept signals up to 1080p but will downscale to 1024x768.
How do I adjust keystone correction?
Press the Keystone button on the remote or navigate to Menu > Display > Keystone. Use the arrow keys to adjust vertical keystone up to ±40°.
Why is the projector overheating and shutting down?
Check for blocked air vents or a dirty air filter. Clean the filter and ensure proper ventilation. Operating temperature should be between 0°C and 40°C.
Can I project from a USB drive?
No, the USB port is only for firmware updates or service. Use VGA or HDMI for video input.
How do I clean the projector lens?
Use a soft, lint-free cloth or lens cleaning paper. Do not use liquid cleaners. Gently wipe in a circular motion.
What does the eco mode do?
Eco mode reduces lamp power consumption, lowering brightness and noise. It extends lamp life to 6000 hours. Activate via Menu > Setup.
How do I reset the lamp timer?
After replacing the lamp, go to Menu > Setup > Lamp Settings. Select 'Reset Lamp Timer' and confirm.
What is the throw distance for a 100-inch screen?
With a 1.1x zoom, the distance ranges from about 3.0 to 3.3 meters. Check the user manual for a full distance chart.
User questions about MX520 BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual MX520 - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX520 by BENQ.