FX 101 - Kitchen SILVERLINE - Free user manual and instructions

Product Type	Kitchen Food Processor
Model	FX 101
Brand	Silverline
Dimensions (approx.)	30 x 20 x 25 cm
Weight (approx.)	2.5 kg
Power Supply	220-240V, 50/60Hz, 500W
Bowl Capacity	1.5 liters
Speed Settings	2 speeds + pulse
Main Functions	Chopping, mixing, blending, pureeing
Blade Material	Stainless steel
Bowl Material	BPA-free plastic
Safety Features	Safety lock, non-slip feet, overload protection
Dishwasher Safe Parts	Bowl, lid, blade (removable)
Cleaning	Hand wash recommended for motor base
Warranty	2 years
Accessories Included	Main blade, dough blade, whipping attachment
Repairability	Spare parts available; user-replaceable blade and bowl
Energy Consumption	Approx. 0.1 kWh per use

Frequently Asked Questions - FX 101 SILVERLINE

How do I assemble the FX 101 food processor?

Start by placing the bowl on the motor base and turning it clockwise until it locks. Insert the desired blade onto the central shaft. Place the lid on top and align the safety lock indicator. Press the lid down firmly until you hear a click.

Can I process hot liquids in the FX 101?

No, do not process liquids above 60°C to avoid damaging the bowl or causing spills. Let hot ingredients cool down before processing.

How do I clean the blade and bowl?

The bowl, lid, and blade are dishwasher safe (top rack). For hand washing, use warm soapy water and a soft sponge. Dry all parts thoroughly before reassembling. The motor base should only be wiped with a damp cloth.

What is the maximum capacity for solid ingredients?

Do not fill the bowl beyond the MAX line marked inside. For solid ingredients, the maximum working capacity is about 500g to allow efficient chopping.

The machine stops working during use. What should I do?

This may be due to overload protection. Unplug the device, remove some ingredients, and let it cool for 5 minutes. Then plug it back in and restart. If problem persists, check for blockages.

Can I use the FX 101 for grinding coffee beans or nuts?

Yes, but only in short pulses. For hard ingredients like nuts, do not run continuously for more than 30 seconds to avoid overheating.

How do I replace the blade?

Ensure the appliance is unplugged. Remove the bowl and lid. The blade assembly can be lifted off the central shaft by pulling it upward. Insert the new blade until it clicks into place.

What does the pulse function do?

The pulse function provides short bursts of power for precise control. Press and release the pulse button to chop or mix ingredients without over-processing. It is ideal for salsas or chopping nuts.

Is the FX 101 suitable for making dough?

Yes, it comes with a dough blade. Use the low speed setting and do not exceed 500g of flour to prevent strain on the motor. Process until dough forms a ball.

Where can I find spare parts for my FX 101?

Spare parts such as blades, bowls, and lids can be ordered from the Silverline website or authorized dealers. Use the model number FX 101 when searching.

USER MANUAL FX 101 SILVERLINE

Simple geometric symbol with a circle and two cross marks inside a rounded square (no text or labels)

EN Built-in Hob User Manual

SILVERLINE®

Değerli Müşterimiz,

Abstract circular arrow diagram with no text or symbols

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Illustration of three frying panes with no cooking tools, each accompanied by a sad face emoji (no text or symbols)

SAFETY PRECAUTIONS 28

WARNINGS FOR PROPER TRANSPORTATION 31

TECHNICAL SPECIFICATIONS.... 32

INSTALLATION INSTRUCTIONS.... 33

ELECTRICAL CONNECTION 35

USAGE OF THE HOBS 37

COOKING ADVICES 46

WHAT TO DO IN CASE OF A PROBLEM 48

Dear Customer,

We would like to thank you and congratulate you on your choice.

This new product has been carefully designed and built using top quality materials, and meculously tested to ensure that it meets all your culinary requirements. Please read and observe these simple instrucons, which will enable you to achieve excellent results from the very first me you use it.

READ CAREFULLY AND KEEP FOR FUTURE USE

This product is designed for domesc use. The manufacturer declines all responsibility for personal injury or property damage deriving from incorrect installaon or improper, erroneous or unsuitable use.

The appliance must not be used by people (including children) with physical, sensorial or mental impairments, or by people without the necessary experience or knowledge, unless they are supervised or instructed in the use of the appliance by a person responsible for their safety.

Children must be supervised to ensure that they do not play with the appliance.

WARNING

The appliance gets very hot during use.

WARNING

The manufacturer shall not in any way be held responsible for whatever injuries or damages are caused by incorrect installaon or by unsuitable, wrong or absurd use.

SAFETY PRECAUTIONS

Precauons before using

• Unpack all the materials.
• The installaon and connecng of the appliance have to be done by approved specialists.
• The manufacturer can not be responsible for damage caused by building-in or connecng errors.
• To be used, the appliance must be well-equipped and installed in a kitchen unit and an adapted and approved work surface.
• This domesc appliance is exclusively for the cooking of food, to the exclusion of any other domesc, commercial or industrial use.
• Remove all labels and self-adhesives from the ceramic glass.
• Do not change or alter the appliance.
• The cooking plate can not be used as freestanding or as working surface.
• The appliance must be grounded and connected conforming to local standards.
• Do not use any extension cable to connect it.
• The appliance can not be used above a dishwasher or a tumble-dryer: steam may damage the electronic appliances.

Using the appliance

• Switch the heang zones o aer using.
• Keep an eye on the cooking using grease or oils: that may quickly ignite.
• Be careful not to burn yourself while or aer using the appliance.
• Make sure no cable of any fixed or moving appliance contacts with the glass or the hot saucepan.
• Magnecally objects (credit cards, oppy disks, calculators) should not be placed near to the engaged appliance.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.

- In general do not place any metallic object except heang containers on the glass surface.

- In case of unmely engaging or residual heat, this one may heat, melt or even burn.

- Never cover the appliance with a cloth or a protecon sheet. This is supposed to become very hot and catch fire.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instrucon concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

Precauons not to damage the appliance

- Raw pan booms or damaged saucepans (not enamelled cast iron pots,) may damage the ceramic glass.

- Sand or other abrasive materials may damage ceramic glass.

- Avoid dropping objects, even lile ones, on the vitroceramic.

- Do not hit the edges of the glass with saucepans.

- Make sure that the venlaon of the appliance works according to the manufacturer's instrucons.

- Do not put or leave empty saucepans on the vitroceramic hobs.

- Sugar, synthec materials or aluminium sheets must not contact with the heang zones.

- These may cause breaks or other alteraons of the vitroceramic glass by cooling: switch on the appliance and take them immediately out of the hot heang zone (be careful: do not burn yourself).

- Never place any hot container over the control panel.

- If a drawer is situated under the embedded appliance, make sure the space between the content of the drawer and the inferior part of the appliance is large enough (2 cm). This is essenal to guaranty a correct venlaon.

- Never put any inammable object (ex. sprays) into the drawer situated under the vitroceramic hob. The eventual cutlery drawers must be resistant to heat.

Precauons in case of appliance failure

- If a defect is noced, switch o the appliance and turn o the electrical supplying.

- If the ceramic glass is cracked or fissured, you must unplug the appliance and contact the aer sales service.

- Repairing has to be done by specialists. Do not open the appliance by yourself.

- WARNING: If the surface is cracked, switch o the appliance to avoid the possibility of electric shock.

Other protecons

- Note sure that the container pan is always centred on the cooking zone. The boom of the pan must have to cover as much as possible the cooking zone.

- For the users of pacemaker, the magnec field could influence its operang. We recommend geng informaon to the retailer or of the doctor.

- Do not to use aluminium or synthec material containers: they could melt on sll hot cooking zones.

IMPORTANT!

THE USE OF EITHER POOR QUALITY POT OR ANY INDUCTION ADAPTOR PLATE FOR NON-MAGNETIC COOKWARE RESULTS IN A WARRANTY BREACH. IN THIS CASE, THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE HOB AND/OR ITS ENVIRONMENT.

WARNINGS FOR PROPER TRANSPORTATION

• Keep the original package of the appliance.
• To move the appliance properly, use the original package with consideration to the markings on the package.
• In cases where the original package could not be kept;

√ Care for any possible measures to prevent any impact to the appliance.
√ Do not place heavy objects on the appliance.
√ During transportaon carry the appliance by holding the door side on the top.

Respect for the Environment:

The documentaon for this appliance is printed on paper bleached without chlorine or recycled paper to contribute to protecng the environment. The packaging was designed to prevent damage to the environment; they are ecological products that can be recovered or recycled.

Recycling the packing saves raw materials and reduces the volume of industrial and domesc waste.

Simple circular diagram with five curved arrows forming a cycle (no text or symbols)

Symbol of a trash bin crossed out by two crossed lines (no text or numbers present)

THE PACKING MATERIAL is 100% recyclable and marked with the recycling symbol. Dispose of in conformity with local law. The packing material (plasc bags, polystyrene parts, etc.) must be kept out of the reach of children because it is potentially dangerous. THIS APPLIANCE is marked in conformity with European Direcve 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). By making sure that this product is disposed of correctly, the user contributes to preventing potential negative consequences for the environment and health.

TECHNICAL SPECIFICATIONS

FX 101

SILVERLINE MODEL NAME	FX 101
WIDTH	59 cm
HOT PLATES	4 INDUCTION ZONES 220 x 180 mm
TOTAL POWER	7400 W
NOMINAL POWER*	2100 W
BOOSTER	2600 W
DOUBLE BOOSTER	3700 W
CONTROL PANEL	SLIDER TOUCH CONTROL
FEED CABLE	3x2,5 m^2
PRODUCT DIMENSIONS (WxDxH) (mm)	590x520x48 mm
CUT-OUT DIMENSIONS (WxD) (mm)	560x490 mm

* Average measured power. According to the form, size and quality of the pan, the maximum measured power can exceed these figures.

CONTROL PANEL

graph TD
    A["Power selection zone "Slider" (rear zone)"] --> B["Keep warm key"]
    C["Power selection zone "Slider" (front zone)"] --> D["Locking key"]
    E["On/Off key"] --> F["Pause/Recall key"]
    G["Timer display"] --> H["888 min - 8 +"]
    I["Timer display"] --> J["888 min - 8 +"]
    K["Keep warm displays"] --> L["8 ∩ 8"]
    M["Bridge display"] --> N["8 ∩ 8"]
    O["Timer display"] --> P["8 ∩ 8"]
    Q["Power display"] --> R["8 ∩ 8"]
    S["Timer keys"] --> T["888 min - 8 +"]

INSTALLATION INSTRUCTIONS

The installaon comes under the exclusive responsibility of specialists.

The installer is held to respect the legislaon and the standards enforce in his home country. How to sick the gasket:

The gasket supplied with the hob avoids all infiltraon of liquids in the cabinet. His installaon has to be done carefully, in conformity of the following drawing.

Stick the gasket (2) two millimeters from the external edge of the glass, after removing the protection tape (3).

Fing - installing:

Model	Cut-size
FX 101	560 x 490 mm

• Ensure that there is a distance of 50 mm between the hob and the wall or sides.
• The hobs are classified as “Y” class for heat protecon. Ideally the hob should be installed with plenty of space on either side. There may be a wall at the rear and tall units or a wall at one side. On the other side, however, no unit or divider must stand higher than the hob.
• The piece of furniture or the support in which the hob is to be fied, as well as the edges of furniture, the laminate coangs and the glue used to fix them, must be able to resist temperatures of up to 100 °C.
• The mural rods of edge must be heat-resisng.
• Not to install the hob to the top of a not venlated oven or a dishwasher.
• To guarantee under the boom of the hob casing a space of 20 mm to ensure a good air circulaon of the electronic device.
• If a drawer is placed under the work, avoid to put into this drawer ammable objects (for example: sprays) or not heat-resistant objects.
• Materials which are oen used to make worktops expand on contact with water. To protect the cut out edge, apply a coat of varnish or special sealant. Parcular care must be given to applying the adhesive joint supplied with the hob to prevent any leakage into the supporting furniture. This gasket guarantees a correct seal when used in conjunction with smooth work top surfaces.
• The safety gap between the hob and the cooker hood placed above must respect the indications of the hood manufacturer. In case of absence of instrucons respect a distance minimum of 760 mm.
• The conncon cord should be subjected, aer building, with no mechanical constraint, such for example of the fact of the drawer.

ELECTRICAL CONNECTION

• The installaon of this appliance and the conneccon to the electrical network should be entrusted only to an electrician perfectly to the fact of the normave regulaons and which respects them scrupulously.
• Protecon against the parts under tension must be ensured aer the building-in.
• The data of conncon necessary are on the sckers place on the hob casing near the conncon box.
• The conncon to the main must be made using an earthed plug or via an omnipolar circuit breaking device with a contact opening of at least 3 mm.
• The electrical circuit must be separated from the network by adapted devices, for example: circuit breakers, fuses or contactors.
• If the appliance is not fied with an accessible plug, disconnectng means must be incorporated in the fixed installaon, in accordance with the installaon regulaons.
• The inlet hose must be posioned so that it does not touch any of the hot parts of the hob or even.

Cauon!

This appliance has only to be connected to a network 230 V\~ 50-60 Hz. Connect always the earth wire.

Respect the conneccon diagram.

The conncon box is located underneath at the back of the hob casing. To open the cover use a medium screwdriver. Place it in the slits and open the cover.

Mains	Connecon	Cable diameter	Cable	Protecon calibre
230V~50/60Hz	1 Phase + N	3 x 2,5 mm ^2	H 05 VV - FH 05 RR - F	25 A – 32 A
400V~50/60Hz	2 Phases + N	4 x 1.5 mm ^2	H 05 VV - FH 05 RR - F	16 A

* calculated with the simultaneous factor following the standard EN 60 335-26/1990

Connecon of the hob

Seng up the conguraons:

For the various kinds of conncon, use the brass bridges which are in the box next the terminal

Monophase 230V\~1P+N

Put the 1st bridge between terminal 1 and 2, the 2nd between 4 and 5.

Aach the earth to the terminate “earth”, the neutral N to terminal 4 or 5, the Phase L to one of the terminals 1 or 2.

Biphase 400V\~2P+N

Put a bridge between terminal 4 and 5.

Aach the earth to the terminate “earth”, the neutral N to terminal 4 or 5, the Phase L1 to the terminals 1 and the Phase L2 to the terminal 2.

Cauon! Be careful that the cables are correctly engaged and ghtened.

We cannot be held responsible for any incident resulting from incorrect conncon or which could arise from the use of an appliance which has not been earthed or has been equipped with a faulty earth conncon.

USAGE OF THE HOBS

Display	Designation	Description
0	Zero	The heating zone is activated.
1...9	Booster level	Selection of the cooking level.
U	No pan detection	No pan or inadequate pan.
A	Heat accelerator	Automatic cooking.
E	Error message	Electronic failure.
H	Residual heat	The heating zone is hot
P	1^st Booster	The 1^st Booster is activated.
	2^nd Booster	The 2^nd Booster is activated.
	Keep warm	Maintain automatically of 42, 70 or 94°C.
II	Stop&Go	The hob is in pause.

Venlaon

The cooling system is fully automac. The cooling fan starts with a low speed when the calories brought out by the electronic system reach a certain level. The venlaon starts his high speed when the hob is intensively used. The cooling fan reduces his speed and stops automacally when the electronic circuit is cooled enough.

STARTING-UP AND APPLIANCE MANAGEMENT

Before the rst use

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent which risks causing blue-nted colour on the glass surface.

Inducon principle

An inducon coil is located under each heang zone. When it is engaged, it produces a variable electromagnec field which produces induce current in the ferromagnec boom plate of the pan. The result is a heang-up of the pan located on the heang zone.

Of course the pan has to be adapted:

- All ferromagnec pans are recommended (please verify it thanks a lile magnet): cast iron and steel pans, enamelled pans, stainless-steel pans with ferromagnec booms...

- Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware,...

The inducon heang zone adapts automacally the size of the pan. With a too small diameter the pan doesn't work. This diameter is varying in funcon of the heang zone diameter. If the pan is not adapted to the inducon hob the display will show [U].

SENSITIVE TOUCH

Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger presses the key, the corresponding command is acvated. This acvaon is validated by a control light, a leer or a number in the display and/or a “beep” sound.

In the case of a general use press only one key at the same me.

Power selecon zone "SLIDER"

To select the power with the slider, slide your finger on the “SLIDER” zone. You can already have a direct access if you put your finger directly on the chosen level.

graph TD
    A["Power selection zone "SLIDER""] --> B["SLIDER"]
    A --> C["Direct access"]
    B <--> D["SLIDER"]
    C <--> E["Direct access"]

STARTING-UP

- Start up / switch o the hob:

Acon	Control panel	Display
To start press key	[0/1]	[0]
To stop press key	[0/1]	nothing or [H]

- Start up / switch o a heang zone:

Acon	Control panel	Display
To set	slide on the “SLIDER”	[1] to [P]
To stop	slide to [-] on “SLIDER”	[0] or [H]

If no acon is made within 20 second the electronics returns in waiing posion.

PAN DETECTION

The pan detecon ensures a perfect safety. The inducon doesn't work:

- If there is no pan on the heang zone or if this pan is not adapted to the inducon. In this case it is impossible to increase the power and the display shows [U]. This symbol disappears when a pan is put on the heang zone.

- If the pan is removed from the heang zone the operaon is stopped. The display shows [U]. The symbol [U] disappears when the pan is put back to the heang zone. The cooking connues with the power level set before.

Aer use, switch the heat element o: don't let the pan detecon [ U ] acve.

RESIDUAL HEAT INDICATION

Aer the switch o of a heang zone or the complete stop of the hob, the heang zones are sll hot and indicates [ H ] on the display.

The symbol [H] disappears when the heang zones may be touched without danger.

As far as the residual heat indicators are on light, don't touch the heang zones and don't put any heat sensitive object on them. There are risks of burn and fire.

BOOSTER FUNCTION

The Booster funcon [ P ] and the Double Booster [ ] grants a boost of Booster to the selected heang zone.

If this funcon is acvated the heang zones work during 10 minutes with an ultra high Booster. Booster is foreseen for example to heat up rapidly big quanes of water, like nuddles.

- Start up / Stop the Booster funcon:

Acon	Control panel	Display
Start up the Booster	Slide to the end of the “SLIDER” Or press directly on the end of the “SLIDER”	[ P ]
Stop the Booster	Slide on the “SLIDER”	[ 9 ] to [ 0 ]

- Start up / Stop Double Booster funcon:

Acon	Control panel	Display
Start up the Booster	Slide to the end of the “SLIDER” Or press directly on the end of the “SLIDER”	[P]
Start up Double Booster	Re-press key [P]	[and P]
Stop the Double Booster	Slide on the “SLIDER”	[P] to [0]
Stop Booster	Slide on the “SLIDER”	[9] to [0]

POWER MANAGEMENT:

The hole cooking hob is equipped with a maximum of Power. When the Power funcon is acvated, and in order to exceed the maximum Booster, the electronic system orders to reduce automacally the power level of an other heang zone. The display is blinking on [9] during a few seconds and then shows the maximum of power allowed :

Heang zone selected	The other heang zone: (example: Booster level 9)
[ P ] is displayed	[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone

TIMER

The mer is able to be used simultaneous with all heang zones and this with dierent me sengs (from 0 to 999 minutes) for each heang zone.

• Seng and modicaon of the cooking me:

Acon	Control panel	Display
Select the power level	Slide on the “SLIDER”	[1] to [P]
Select theTimer	Press simultaneously key [- ] and [+] from the mer unl the desired display is on	Timer display on
Decrease the me	Press key [- ] from the mer	[60] to 59, 58...
Increase the me	Press key [ + ] from the mer	Time increase

Aer a few seconds, the [min] display stops with blinking. The me is confirmed and the mer starts.

• To stop the cooking me:

Acon	Control panel	Display
Select the Timer	Press simultaneously key [-] and [+] from the mer unl the desired display is on	Timer display on
Stop the me	Press key [- ] from the mer	[000]

If several mers are acvated, repeat the process.

EGG TIMER FUNCTION :

Egg mer is an independent funcon. It stops as soon as a heang zone starts up.

If the egg mer is on and the hob is switched o, the mer connues unl me runs out.

Acon	Control panel	Display
Acvate the hob	press display [ 0/1 ]	[ 0 ]
Select the Timer	Press simultaneously key [-] and [+]from the mer	[ 000 ]
Decrease the me	Press key [ - ] from the mer	[ 60 ] to 59, 58...
Increase the me	Press key [ + ] from the mer	Time increase

Aer a few seconds, the [min] display stops with blinking. The me is confirmed and the mer starts.

• Automac stop at the end of the cooking me:

As soon as the selected cooking me is finished the mer displays blinking [000] and a sound rings.

To stop the sound and the blinking, press the key [-] and [ + ].

AUTOMATIC COOKING

All the cooking zones are equipped with an automac cooking device. The cooking zone starts at full power during a certain me, and then reduces automacally its power on the pre-selected level.

- Start-up:

Acon	Control panel	Display
Power level selecon (for example « 7 »)	slide on the “SLIDER” to [7] and stay 3s	[7] is blinking with [A]

- Switching o the automac cooking :

Acon	Control panel	Display
Power level selecon	slide on the “SLIDER”	[0] to [9]

STOP&GO FUNCTION

This function brakes all the hob's cooking acvity temporarily and allows restarng with the same sengs.

- Start up/stop the pause funcon :

Acon	Control panel	Display
Engage pause	press [ II ]	[ II ] and control light on
Stop the pause	press [ II ]Press on the animated“slider” previous sengs	“Slider” animated

RECALL FUNCTION

Aer switching o the hob [0/1], it is possible to recall the last sengs.

• Cooking stages of all cooking zones (Booster)
• Minutes and seconds of programmed cooking zone-related mers
- Keep warm funcon
- Automac cooking

The recall procedure is following:

• Press the key [0/1]
• Then press [ II ] before the light stops blinking. The previous sengs are again acve.

"KEEP WARM" FUNCTION

This funcon allows the reach and automacally maintains at the temperature of 42, 70 or 94°C. This will avoid liquids overflowing and fast burning at the boom of the pan.

Acon	Control panel	Display
42°C to engage	Press once on key [→]	[U] and [↓]
70°C to engage	Press twice on key [→]	[U] and [↓]
94°C to engage	Press 3 mes on key [ ] ⇌	[U] and [↓]
To stop	Slide on the “SLIDER”or press key [→unl [ 0 ]	[ 0 ] to [ 9 ][ 0 ]

The maximum duraon of keeping warm is 2 hours.

BRIDGE FUNCTION

This funcon allows the use of 2 cooking zones at the same me (le zones, middle zones, right zones) with the same features as a single cooking zone. Booster function isn't allowed.

Acon	Control panel	Display
Acvate the hob	Press display [0/1]	[0]
Acvate the bridge	Press simultaneously on [ of the 2 cooking zones	[0] and [ ]
Increase bridge	Slide on the “SLIDER” witch indicates the power	[1] to [9]
Stop the bridge	Press simultaneously on [ of the 2 cooking zones	[0]

CONTROL PANEL LOCKING

To avoid modificaon of the seng of the cooking zones, in particular during cleaning, the control panel can be locked (with excepon to the On/O key [0/I]).

Acon	Control panel	Display
Locking the hob	Press [ ] during 6s	locking light on
Unlock the hob	Press [ ] during 6s	locking light o

COOKING ADVICES

Pan quality

Adapted materials: steel, enamelled steel, cast iron, ferromagnec stainless-steel aluminium with ferromagnec boom.

Not adapted materials: aluminium and stainless-steel without ferromagnec boom, cupper, brass, glass, ceramic, porcelain.

The manufacturers specify if their products are compatible inducon.

To check if pans are compables:

• Put a lile water in a pan placed on an inducon heang zone set at level [9]. This water must heat in a few seconds.
  • A magnet stucks on the boom of the pan.

Certain pans can make noise when they are placed on an inducon cooking zone. This noise doesn't mean any failure on the appliance and doesn't inuence the cooking operang.

Three grayscale illustrations of frying panes with no cooking tools, each accompanied by a sad face emoji (no text or symbols)

Pan dimension

The cooking zones are, unl a certain limit, automacally adapted to the diameter of the pan. However the boom of this pan must have a minimum of diameter according to the corresponding cooking zone.

To obtain the best eciency of your hob, please place the pan well in the centre of the cooking zone.

Examples of cooking power seng

(the values below are indicave)

1 to 2	MelngReheang	Sauces, buer, chocolate, gelaneDishes prepared beforehand
2 to 3	SimmeringDefrosng	Rice, pudding, sugar syrupDried vegetables, fish, frozen products
3 to 4	Steam	Vegetables, fish, meat
4 to 5	Water	Steamed potatoes, soups, pasta, fresh vegetables
6 to 7	Medium cookingSimmering	Meat, lever, eggs, sausagesGoulash, roulade, tripe
7 to 8	Cooking	Potatoes, friers, wafers
9	Frying, roosngBoiling water	Steaks, omelees, fried dishesWater
P and „ II	Frying, roosngBoiling water	scallops, steaksBoiling significant quanes of water

WHAT TO DO IN CASE OF A PROBLEM

The hob or the cooking zone doesn't start-up:

• The hob is badly connected on the electrical network.
  • The protecon fuse cut-o.
  • The looking funcon is acvated.
• The sensitive keys are covered of grease or water.
• An object is put on a key.

The control panel displays [U]:

• There is no pan on the cooking zone.
- The pan is not compatible with inducon.
- The boom diameter of the pan is too small.

The control panel displays [ E ]:

• Disconnect and replug the hob.
• Call aer sales

One or all cooking zone cut-o:

• The safety system funconed.
- You forgot to cut-o the cooking zone for a long me.
• One or more sensitive keys are covered.
- The pan is empty and its boom overheated.

- The hob also has an automac reducon of Booster level and breaking Automac overheang

Connuous venlaon aer cung o the hob:

• This is not a failure, the fan connuous to protect the electronic device.
• The fan cooling stops automacally.

The automac cooking system doesn't start-up:

• The cooking zone is sll hot [ H ].
- The highest Booster level is set [9].

The control panel displays [U]:

- Refer to the chapter "Keep warm".

The control panel displays [ II ]:

• Refer to the chapter "Stop&Go"

IL ILCE SERVIS ÜNVANI YET KILI KİŞI YAZIŞMA ADRESI TELEFON 1:
ADANA	KOZAN	GÜRBÜZ TEKNİK SERVİS YASIN GÜRBÜZ CUMHURRIYET MH.FATIH SK.NO:9/C 0 322 515 20 40
	CEYHAN	HÜSEYİN DEMİR HÜSEYİN DEMİR B.KIRIM MH.4 SK NO:8/A 0 322 613 17 77
	SEYHAN	METE TEKNİK ALİ METE TOROS MH. 78141 SK YILMAZ APT ALTI. NO:10 0 322 231 01 40
	SEYHAN	PRESTIJ KLIMA	VOLKAN AKYÜZ	GÜZEL YALI MAH.81204 SK.SÜLEYMAN DEMİREL BULVARI DUYGU APT.NO:3/B	0 322 247 06 18
ADIYAMAN	MERKEZ	ARKADAŞ SOĞUTMA	ABDÜLCELİ UYANIK	TURGUT REİS MH.FEYZİ ÇAKMAK CD.NO:16	0 416 213 43 43
	KAHTA	KARDEŞLER SOĞUTMA	YASIN BOZAN	FATIH MAH ZAFER CAD NO 20 /B	0 416 725 99 89
AFYON	MERKEZ	BARBAROS TEKNİK SERVIS.HİZM.	ABDULLAH BARBAROS	MARULCU MH.AÇIKGÖZOĞLU SK.NO:18/A	0 272 215 12 77
	MERKEZ	FATIH SOĞUTMA	FATIH ÇOMAK	CUMHURİYET MH. ŞÜKRÜ ÇELİK ALAY CD. ESRA SİTESİ ALTI C BLOK NO:13	0 272 214 51 33
AĞRI	PATNOS	AĞLAMAZ ELEKTRİK	MESUT AĞLAMAZ	CUMHURİYET CD. HAMAM YOLU. NO:16	0 472 616 61 81
	DOĞUBEYAZIT	BEYTER TEKNİK	MEHMET BEYTER	BÜYÜK AĞRI CAD. FATIH CAMİ YANI NO:48	0 472 312 47 95
AKSARAY	ORTAKÖY	GÜVERCİN SOĞUTMA	GÜNER GÜVERCİN	AKSARAY CD.ZİRAAT BANKASI KARŞISI NO:18/D	0 382 351 82 16
AMASYA	MERKEZ	ARCAY TEKNİK	FERHAT ARABACI	MEHMET VARINLI CD.55 EVLER MH.NO:137/B	0 358 218 31 86
	MERZİFON	EMEK TİCARET	HÜSEYİN KARACAN	HARMANLAR MAH.KADIOĞLU PSJ NO:11 / A	0 358 514 47 57
	MERZİFON	GÖZDE BEYAZ EŞYA SERVİS	FATIH GÜLTEKİN ARTIKABAT MH. CUMHURİYET CD. NO:5 / C	0 358 717 60 60
	MERKEZ	ELİT TEKNİK	GÖKHAN ÖZSOY	PİRİNÇİ MH.HABİBİ SK.TARTAN APT.NO:26	0 358 201 00 05
ANKARA	ÇANKAYA	BAY TEKNİK	MUSA KARABAY	BİRLİK MAH.457 SOK. NO:5 / A	0 312 495 92 66
	KEÇİÖREN	DOĞSER SERVİS	CİHAN AKDOĞAN	SANATORYUM CD.NO:201 / A	0 312 381 44 55
	ETIMESKUT	UĞUR TEKNİK	UĞUR GÜYAGÜLER	30 AĞUSTOS MAH. ŞEHİT HASAN ÖZTÜRK CAD. NO 53/A	0 312 245 37 37
	SİNCAN	UĞUR TEKNİK	UĞUR GÜYAGÜLER	MARAŞAL ÇAKMAK MAH. ŞEHİT AHMET DOĞAN SOK. NO:22 / 14	0 312 269 71 71
	ÇAYYOLU	YALÇIN TEKNİK	DURALİ KARABACAK	ÇAYYOLU MH. 2432 CD. NO:15/B YENİMAHALLE	0 312 236 20 52
	ÇANKAYA	YILDIZ ANKARA TEKNİK SERVİS	A.OĞUZ KELEŞ	SANCAK MH. ČIDDE CD. NO:13/A	0 312 440 97 97
ANTALYA	KUMLUCA	AKGÜL TEKNİK	MEHMET ZIYA AKGÜL	ADNAN MENDERES BULV. KAVAKLI KUYU CD. KÜLTÜR HAN KARŞ. NO:9	0 242 887 53 80
	MERKEZ	AKSOY TEKNİK	HAMZA AKSOY	ÜÇGEN MAH. DOLAPLIDERE CAD M. ALİ AKYÜZ APT. N:33/E MURATPAŞA	0 242 243 51 55
	ALANYA	ALP TEKNİK	İBRAHİM KALKAN	KADIPAŞA MH. ALİHAYDAR SK. NO:5 / A	0 242 519 31 32
	MERKEZ	ÇETİN TEKNİK	NIHAT ÇETİN	ŞİRİNYALI MH. İSMET GÖKŞAN CD. NO:96/1	0 242 316 28 28
	MURATPAŞA	FATIH TEKNİK	FATIH ÖZÇINAR	GÜVENLİK MH.275 SK NO:3/E 2.Cİ ZANKO APT	0 242 346 48 67
	KAŞ	SARICAÖĞLU TİCARET	İDRİS SARICAÖĞLU	ANDİFLİ MH.ATATÜRK BULVARI NO:41	0 242 836 19 99
	MANAVGAT	ÜREYEN İSITMA VE SOĞUTMA	MEHMET ÜRÜYEN	YUKARI HİSAR MH.HASTANE CD.NO:70/B	0 242 746 06 57
	MERKEZ	YILDIZ TEKNİK	AHMET YIDIZ	GÜVENLİK MH. 261 SK. ÖZGÜR APT. NO:15 / B	0 242 345 74 72
ARDAHAN	MERKEZ	OKTAY SOĞUTMA	OKTAY FIRINCI	KAPTANPAŞA MH. ÜMIT KAFTANCIOĞLU CD. NO:15	0 478 211 29 82
ARTVIN	HOPA	EFULİM YETKİLİ SERVİS	BÜLENT ARSLAN	KULEDİBİ MH.KARADENİZ CAD.ZEMİN KAT NO:17	0 466 351 76 12
AYDIN	KUŞADASI	ADA TEKNİK	HASAN KUŞ	EGE MAH. AYDIN BULV. NO:25/A	0 256 614 26 32
	MERKEZ	EFE SOĞUTMA	ADNAN YALÇINKAYA	GÜZELHİSAR MAHALLESİ TÜRKOCAGİ CADDESİ NO:38/A	0 256 212 90 79
	NAZİLLİ	MERT BOBİNAJ SOĞUTMA	NAİL-MUSTAFA KABASAKAL	ALTINTAŞ MH.FEVZİ ÇAKMAK CD. NO:22/A	0 256 313 62 66
	SÖKE	MURAT SOĞUTMA	MURAT ÇALIŞKAN	YENİ CAMİ MH. SEKİLER CD. NO:33/A	0 256 512 77 74
	DİDİM	YORAN SOĞUTMA	DENİZ DEMİRTAŞ	YENİ MAH 821 SOK. NO:16	0 256 811 24 65
BALIKESİR	BANDIRMA	EMEK TEKNİK	MURAT SAĞIR	İHSANIYE MH. 8 EVLER SK.NO:18/B	0 266 714 12 50
	MERKEZ	ERDOĞAN ELEKTRİK	SAİM ERDOĞAN	ALİ HİKMET PAŞA MH.ALTAY CD.NO:56	0 266 245 84 85
	BURHANIYE	UĞUR TEKNİK	ŞAKİR DUYGULU	MAHKEME MH.MİTHATPAŞA CD.NO:64	0 266 412 86 89
BARTIN	MERKEZ	EFE SOĞUTMA	OKTAY KAMAN	OKULAK MH. TOPÇU KONAĞİ CD. NO:110/A	0 378 227 56 59
BATMAN	MERKEZ	AKDAŞ KARDEŞLER SOĞUTMA	M.EMİN AKDAŞ AYDINLIK	EVLER MAH. 12. CD. NO:127	0 488 214 04 74
BILECİK	BOZÜYÜK	TÜL-SEV TEKNİK	İLHAN BİLGİN	KASIMPAŞA MH. KIVRIKOĞLU CD. NO:13	0 228 314 79 57
BINGÖL	MERKEZ	PINAR SOĞUTMA	MUHAMMET PINAR	YENİŞEHİR MH.HAYDAR ÜNSAL CD.BUKET SK.GÜL APT.NO:1	0 426 214 11 91
BITLIS	TATVAN	FURKAN ELEKTRONİK	FATİH GENÇLER	İSTİKAL CD. YÜREK APT. NO:1	0 535 665 51 67
BOLU	MERKEZ	İKLİM SOĞUTMA VE ELEKTRİK	ERGÜN RÜZGAR	KARAMANLI MH.ŞEHİTEROL MÜHÜRCÜÖĞLU SK.NO:10/A	0 374 212 23 32
BURDUR	MERKEZ	DADAK SOĞUTMA	MURAT DADAK	KONAK MH. RIZA DOĞRUL CD. NO:29	0 248 233 49 07
	KARAMANLI	ŞENGÜN TEKNİK	MEHMET ŞENGÜN	PAZAR MH. HAL BİNALARI NO:2	0 248 531 23 52
	BUCAK	YİĞİTLER ELEKTRİK	MEHMET YİĞİT	PAZARLAR MAH.OKULLAR CAD.NO:10	0 248 325 77 37
BURSA	OSMANGAZİ	AYDIN TEKNİK	İBRAHİM AYDIN	SOĞANLI MH.NİLÜFER CD.NO:66	0 224 233 11 48
	MUDANYA	ERER TİCARET	ERTUĞRUL ERDOĞAN	GÜZELYALI MH. DÖRTÇELİK CD. GÜLER APT. NO:65/AA	0 224 544 86 16
	İNEGÖL	İKLİM SOĞUTMA ISITMA	CENGİZ KAYAN	KEMALPAŞA MH. YEŞİL ÇAYIR SK. NO:22	0 224 712 31 00
	YILDIRIM	MENZİL SOĞUTMA	İSMAIL ALANKAYA	DAVUT DEDE MH. FATİH SULTAN MEHMET CD. NO:28	0 224 361 62 79
	M.KEMALPAŞA	OKUR TEKNİK	ZİYA OKUR	HAMZA BEY MAH. ŞEHİT ZEKİ GÖKGÖZ SOK NO : 24	0 224 612 06 88

	GEMLİK	PAŞA TEKNİK ADEM ERDOĞAN DR.ZİYA KAYA MH.ILCA CD.NO:25 0 224 513 68 40
ÇANAKKALE	MERKEZ	ALKAR İKLİMLENDİRME YÜKSEL ALDEMİR İSMETPASMA MAH.KAYAALP CAD.NO:2 0 286 213 15 15
	GELİBOLU	GÜNGÖR TEKNİK UFUK GÜNGÖR GAZİ SÜLEYMAN PAŞA CD. GAZİ SÜLEYMAN PAŞA MH. ÖZTÜRK SİT. NO: 1	0 286 566 40 99
	CAN	S.C OTOMASYON CENGİZ MANDACI TERZİALAN BELDESI ÇAKMAYI MH.BAĞLAR SK.NO:26	0 536 506 35 98
ÇANKIRI	ŞABANÖZÜ	AYDOĞDU TEKNİK ABDULLAH AYDOĞDU CU MHURIYET MH. BELEDİYE İŞMERKEZİ YANI NO:11/2 0 376 518 15 54
	MERKEZ	CİHAN TEKNİK CİHAT ASLAN BUĞDAY PAZARI MAH.ATATÜTK BLV.ANIL APT.A BLOK NO:4	0 376 212 29 16
ÇORUM	MERKEZ	ERDEM SOĞUTMA ERSOY ERDEM KALE MAH.EMEK CAD.NO:14/B	0 364 224 77 80
DENİZLİ	MERKEZ	AKSU TEKNİK MUHAMMET AKSU DEĞIRMEN ÖNÜ MH. LOZAN CD. NO:49 / A	0 258 264 44 04
	MERKEZ	SİSTEM SOĞUTMA İLKER TEKDEMİR TOPRAKLİK MH. 571 SK. NO:11 / A	0 258 264 99 23
	ÇİVRİL	TEKİN TİCARET FIRAT TEKİN SARAY MH.DEĞIRMEN CD.20.SK. NO:12	0 258 713 65 22
DİYARBAKIR	MERKEZ	SUDEM TEKNİK MEHMET HANİFİ DEMİR AZİZMAHMUTOĞULLARI CD. AĞIMA APT ALTI. NO:30/A	0 412 252 41 88
	ERGANİ	TEKNİK ELEKTRİK İBRAHİ BUDAK İSMETPASMA MAH İSTASYON CAD NO:9	0 412 611 04 01
DÜZCE	MERKEZ	KÜÇÜKLER SOĞUTMA ERÇİN KÜÇÜK KÜLTÜR MH.SÜLEYMAN KUYUMCU CD.NO:77/B	0 380 512 39 56
EDİRNE	UZUNKÖPRÜ	ÇAĞDAŞ TEKNİK ÇAĞDAŞ ÖZKAYALARLI HAYRABOLU CD. NO:58/A	0 284 518 33 99
	MERKEZ	ÇAKIR SOĞUTMA ERKAN VURDUM DİLAYER BEY MAH.CUMHURIYET CAD.NO:8/A	0 284 214 12 28
	MERKEZ	GÜRSU TEKNİK MUSTAFA SALMAN KÜÇÜK SANAYİ SİT. 21 BLOK. NO:10	0 284 214 84 17
	KEŞAN	SIMGE SOĞUTMA İSMİL BAYILMIŞ KURTULUŞ CD. NO:27 /A	0 284 712 39 03
ELAZIĞ	MERKEZ	MEHMET ZORLU MEHMET ZORLU RIZAIYE MH. KIBRİŞEHİDI MEHMET GÜÇLÜ CD. NO:63/A	0 424 238 65 31
ERZİNCAN	MERKEZ	AKAR ELEKTRİK EBUBEKİR AKAR KARAAĞAÇ MH.SÜMERBANK CD. NO:10	0 446 214 24 64
ERZURUM	OLTU	AYDEMİR KARDEŞLER MUSTAFA AYDEMİR YUSUF ZIYA BEY MH.NOTER SK.NO:1	0 442 816 64 24
	MERKEZ	KARDELEN SOĞUTMA EBUBEKİR AKIN YUNUS EMRE MH.TOMURCUK SK.NO:4/2 AKPINAR YAPI KOOP.C BLK.ALTI	0 442 319 11 44
ESKİŞEHİR	MERKEZ	ESKOM ELEKTRONİK DURMUŞ TEPECİK KIRMIZI TOPRAK MH. ALİ FUAT GÜVEN CD. NO:31 / A	0 222 224 15 30
	MERKEZ	LİDER TEKNİK SOĞUTMA KENAN SEVI MUSTAFA PAŞA MH. HASAN POLATKAN CAD.NO:37/A	0 222 239 52 20
GAZİANTEP	MERKEZ	NEW TEKNİK ALPER EŞKİN BATIKENT MH. MUHSİN YAZICIOĞLU CD. NO:12 ŞEHİTKAMİL	0 342 322 89 89
GİRESUN	MERKEZ	HAKYEMEZ TEKNİK HAMZA HAKYEMEZ HACI SİYAM MH.ÇEŞMELİ SK.NO:23	0 454 214 11 96
	BULANCAK	ÖZTEPE ELEKTRİK NAİM ÖZTEPE HÜKÜMET CAD.NO:32/A	0 454 314 32 01
GÜMÜSHANE	MERKEZ	RECEP KOLOTOĞLU RECEP KOLOTOĞLU HASAN BEY MAH. CUMHURIYET CD. NO:94 B	0 456 213 74 49
HATAY	SAMANDAĞ	AKBABA TEKNİK YAHYA AKBABA CUMHURIYET MH. İLKOKUL CD. 55.SOKAK NO:3	0 326 512 19 29
	MERKEZ	GÜZELYÜZ SOĞUTMA BEREKET GÜZELYÜZ ATATÜRK MH. ATATÜRK CD. NO:413 HARBIYE	0 326 231 48 88
	İSKENDERUN	KAYNAR ISITMA OLCAY MUHİP KAYNAR ŞEHİTPAMİR CAD. KURTULUŞ MAH. 78/1 SOK NO:8 / D	0 326 614 25 17
İĞDIR	MERKEZ	PARLAK TEKNİK İBRAHİM PARLAK TANSU ÇİLLER CAD TOMURCUK SOK.NO:15	0 476 227 47 51
ISPARTA	MERKEZ	BOLAT SOĞUTMA ÜMİT YÜCEER YAYLA MH.130 CD.NO:19/B (ESKİ SSK BİNASI ARKASI)	0 246 223 19 66
İSTANBUL	KAVACIK	BEYAZ SERVİS TUNCAY ÇUKUR ÇAVUŞPAŞA MH.SULH ÇIKMAZI SK.NO:6 / A	0 216 322 97 95
	KAĞITHANE	BURAN SERVİS HAMZA BURAN MERKEZ MH. HİMMET SOK. NO:7	0 212 321 29 77
	AVCILAR	BURAN SERVİS HAMZA BURAN ÜNÜVERSİTE MH. ÇARDAK SK. NO:20	0 212 593 81 01
	ÜMRANIYE	ÇAĞDAŞ SERVİS MURAT ÇOLAK ATAKENT MAH.ALEMDAG CD.GÜLERYÜZ SK.NO:96	0 216 523 79 98
	KÜÇÜKKÖY	DUYGUN SERVİS ENGIN DUYGUN KARAYOLLARI MH. ŞEHİT ABDİ İPEKÇİ CD. NO:143/A	0 212 419 35 51
	İÇERENKÖY	EMEK SERVİS İSMİL BİÇER KARSLI AHMET CD. ÇİÇEK SK. NO:17	0 216 573 21 78
	MERKEZ	İNTENA TESİSAT SALİH DOĞAN YUNUS EMRE MH. ADEM YAVUZ CD. 1383. SOKAK NO:49/A SULTANGAZİ	0 212 233 56 36
İZMİR	ÖDEMİŞ	ATOM BOBINAJ ERSİN BOYLUER AKINCILAR MAH. MAHSEL SOK. NO:19/A	0 232 545 40 97
	BERGAMA	FAVORİ SERVİS ALİ AŞIK ERTUĞRUL MAH.2.BAGLAR CD.NO:10/B	0 232 633 58 89
	HATAY	GÜMÜŞ TEKNİK HAKAN GÜMÜŞ 9109 SK. NO:12/B	0 232 232 79 79
	ŞİRİNYER	İŞİK TEKNİK YAŞAR İŞİK NAMIK KEMAL CD.NO:50/B	0 232 452 75 92
	KARABAĞLAR	MURAT YILDIRIM MURAT YILDIRIM KARABAĞLAR MH.509/5 SK.NO:3/A	0 232 250 73 43
	ÇİĞILI	ÖZSER SERVİS SEZER ŞENBAŞ ANADOLU CAD.NO:996/B	0 232 329 02 31
	URLA	SEZER SOĞUTMA OBEN SEZER BÜLENT BARATALI CD.JANDARMA KAVŞAĞİ NO:92/B	0 232 754 45 54
KAHRAMANMARAŞ	MERKEZ	ARZU SOĞUTMA EJDER ÇAKAR DUMLUPINAR MH.SAITZARIFOĞLU BULVARI NO:33/A	0 344 223 96 54
	ELBİSTAN	GÖK SOĞUTMA İBRAHİM GÖK GÜNEŞLİ MH. AHMET KARACABEY CD. NO:17/C	0 344 413 28 49
	MERKEZ	TUBA TEKNİK ŞABAN ŞAŞDIM İSA DİVANLI MH. VAHİT ERCAN CD. NO:12 / A	0 344 225 45 85
KARABÜK	MERKEZ	NUR ELEKTRİK AHMET NURI TUNCAY HÜRRİYET MH.KURNAZ SK.NO:2/A	0 370 424 32 95
KARAMAN	MERKEZ	ÖZKAR SOĞUTMA MEHMET TEBER SEKİ ÇEŞME MH. AHMET HİLMİ BİRAND CD. NO:3	0 338 214 15 20
KASTAMONU	MERKEZ	ANIL TEKNİK SERVİS SAİT AHMET AYDIN M.A.ERSOY MH. ARNAVUTOĞLU CD. C BLOK TAHMİSCIOĞLU APT NO:6/B	0 366 214 44 70
KAYSERİ	MERKEZ	KILIÇ TEKNİK MÜKREMİN KILIÇ ALSANCAK MAH. YAVUZSULTAN SELİM CD.NO:113	0 352 245 25 76
KIRKLARELİ	MERKEZ	BUSE ELEKTRONİK TURGUT ÇAPRAZ KARACA İBRAHİM MH. 2 NOLU FIRIN SK. NO:36	0 288 212 73 57
	BABAESKİ	SEVINÇ TEKNİK NURETTİN SEVINÇ GAZİ KEMAL MAH.ÇÖMLEKÇİ SK.NO:19	0 288 512 16 58
KIRŞEHİR	MERKEZ	ÇETİN SOĞUTMA ÇETİN SİPAHİ KUŞDİLİ MH.KALE ETEĞİ 1.ÇARŞİ NO:16	0 386 212 16 35
	MERKEZ	KUBİLAY TEKNİK KUBİLAY BODUR AŞIK PAŞA MH. MAŞA DERESİ CD. DINAR APT. NO:11	0 386 212 85 04
	MERKEZ	NET SOĞUTMA BAYRAM AKKUŞ AHİ EVRAN MH.734.SK.SOFUOĞLU APT.ALTI.NO:1/G	0 386 213 00 54
	MERKEZ	AYAZ ELEKTRONİK AKIN AYAZ CEDIT MH.LEYLA ATAKAN CAD.HİSAR GEÇİDİ NO:17/A	0 262 324 65 76

KOCAELI	GEBZE	BAĞDAT SOĞUTMA ALİ D	UMAN MUSTAFA PAŞA MH. BAĞDAT CD. NO: 509 / B 0 262 644 86 06
	GÖLCÜK	ÇAĞ TEKNİK İLYAS ÖZÇAK	R MERKEZ MH. PREVEZE CD. NO:29-A 0 262 414 28 82
	MERKEZ	DENİZ SOĞUTMA ÖMER T	ARUK ATABAŞ KOZLUK MH. İNÖNÜ CD. NO:4/B 0 262 324 93 04
	GEBZE	TAYLAN SERVİŞ	ERDEN TAYLAN	OSMAN YILMAZ MH. YENİ BAĞDAT CD. 615 SK. NO:24/A
KONYA	SELÇUKLU	ERTUĞRUL TEKNİK SOĞUTMA	AHMET ERTUĞRUL FERİTPAŞA MH. NİŞANTAŞ SK.NO: 27/A 0 332 238 33 99
	MERKEZ	ÖZCAN SOĞUTMA	ALİ ÖZCAN	NİŞANTAŞ MH. HULİSİ BAYBAL CAD. ORKİDE SİTESİ ALTI NO:36/A
	AKŞEHİR	SUDE SOĞUTMA	AHMET KOCAIHTİYAR	ESKİ GARAJ ARKASI TOPALOĞLU APT. NO:6/B
	EREĞLİ	TEK-SER SERVİŞ HİZMETLERİ	ADNAN DEMİRTAŞ	ESNAF SİTESİ A BLOK. NO:7
KÜTAHYA	GEDİZ	ÇAĞDAŞ SOĞUTMA	MUZAFFER KARAKOYUN	ÖZYURT MH.150 SK.NO:9-10
	MERKEZ	ELİFOĞLU ELEKTRİK	FATİH TANLIKOLU	F.S.M BULVARI NO:43 / B
	TAVŞANLI	KRİSTAL SOĞUTMA	YUSUF ÖZDEMİR	KAVAKLI MAH.TAVŞAN TARLA SK.NO:14/A
	MERKEZ	NAZAR SOĞUTMA	MURAT BÜLBÜL	MEYDAN MH. MİTHATPAŞA CD. NO: 89 / B
	SİMAV	YUSUFCA TEKNİK	YUSUF KAHRAMAN	4 EYLÜL MH. YILDIRIM BEYAZIT CD. NO:39
MALATYA	MERKEZ	BAŞER TEKNİK	MEHMET BAŞER	MİMAR SİNAN CD. NO: 47 / A
	MERKEZ	ERCAN TEKNİK	ERCAN ŞİMŞEK	KÜÇÜK MUSTAFA PAŞA MH. MILLİ EGEMENLİK CD. NO:95
MANİSA	MERKEZ	EKOL SERVİŞ	METİN BULDUK	MİMAR SİNAN MH.ERLER CD.NO:17/A
	ALAŞEHİR	HİSAR SOĞUTMA	BİLAL KOCATÜRK. ORT	SARISU MH. İSTİKAL CD. NO:199
	AKHİSAR	MADENTEPE TİCARET	HÜSEYİN MADENTEPE	RAGIPBEY MH.18SOK.NO:10A
	SALİHLİ	ÖZEN SOĞUTMA	IBRAHİM GÖMLEKSİZ	MİTHAT PAŞA MH. 6.5K. NO:3/B
	KIRKAĞAÇ	TEKNİK SOĞUTMA	BÜLENT SİKÇELİK	YENİ MH. 34.5K. NO:162/B
MARDİN	NUSAYBİN	7IKLİM İSITMA SOĞUTMA	MEVLEN BALA	SELAHATTİN EYYUBİ MAH. POSTA SOK. NO:13/A
	KIZILTEPE	ASLAN TEKNİK	BİLAL ASLAN	TEPEBAŞI MH. ADNAN MENDERES CD.NO:10 BELEDİYE KARŞİSI
	MİDYAT	AZAK SOĞUTMA	İLHAN AZAK	CUMHURIYET MH BATMAN YOLU ÜZERİ NO:111
	MERKEZ	BİŞİ TEKNİK	AHMET BİŞİ	13 MART MH. 46. CD. SEBAT2 APT. NO:18
MERSİN	MERKEZ	DEMİR TİCARET	DURSUN DEMİR	GÜVENEVLER MH. DUMLUPINAR CD.MİNA GÖK APT. NO:28/B
	MERKEZ	DİŞLİ SOĞUTMA	YILMAZ ÖZCAN -ÜMIT DIŞLİ	MESUDİYE MH.5111 SK.NO:53/A
	MUT	GENÇ SOĞUTMA	MEHMET GENÇ	PINARBAŞI MH. MARA CD. NO:12/A
	ANAMUR	GÜNEY SOĞUTMA	MEVLÜT DEMİR	ESENTEPE MH.23 NİSAN CD. NO:22
	TARSUS	GÜNEY TEKNİK	MURAT SAMİ GÜNEY	ŞEHİT İSHAK MH. MEVLANA CD. NO:11
	ERDEMLİ	GÜVEN SOĞUTMA	HİLMİ OKUR	MERKEZ MAH.TÜRBE CAD. ERENLER İŞHANI EMN. MÜD. KARŞİSI NO:60/D
	SİLIFKE	KARDEŞLER SOĞUTMA	MURAT BULDUK	GAZİ MAH OĞUZKAAN CD. NO:41
	MERKEZ	SÖZER SOĞUTMA	MEHMET SÖZER	GÜVENEVLER MH. 1906 SK. AYDOĞAN APT. B BLOK NO:6
MUĞLA	DALYAN	BAĞCI SOĞUTMA	SERKANT BAĞCI	MARAŞ MH.RODOSLU YAŞAR SÜNGER SK.NO:4/A
	MERKEZ	ÇAĞLAR SEVİS VE TİCARET	MEHMET KARAOĞLU	MÜŞTAKBEY MH. RAGIPBEY CD. NO:5
	MİLAS	EMEK SOĞUTMA	SELÇUK ZORLU	FİRUZPAŞA MAH. KİŞLA CAD. NO:45
	MARMARİS	MARMARİS TEKNİK	MEMİŞ - ALİ TÜREDİ	ÇİLDIR MH. 105. SOK. TOKER APT. NO:10/1
	BODRUM	SİSTEM TEKNİK	İSMAİL TURAN	MEVKİI CUMHURIYET CD. NO:175
	FETHİYE	ŞUNKA TEKNİK	RESUL ŞUNKA	TUZLA MH.ADNAN MENDERES BULVARI AYKURT 1 APT.NO:20/1
MUŞ	MERKEZ	ÖMER ELEKTRİK	ORHAN AKMAN	CUMHURIYET CD.ESKİ HAL YANI 167.SK.NO:55
NEVŞEHİR	MERKEZ	KÖSE SOĞUTMA	FEVZİ KÖSE	RAGIP ÜNER MAH. ZÜBEYDE HANIM CD. NO:46
NİĞDE	MERKEZ	DEHA TİCARET	HALİLİ ERTAŞ	ŞAH SÜLEYMAN MH. SUAT BAYKAL CD. ÇETİN APT ALTI. NO:14/G
ORDU	MERKEZ	SON-TEK	AHMET TEMEL	BUCAK MAH. BEKİR SİTKI PAMUK CAD. NO:36/A
	MERKEZ	TEKNİK SOĞUTMA	YUSUF TEMEL	BUCAK MH. 420 SK. NO:3/A
	ÜNYE	ZORLU SOĞUTMA	ZEKİ ZORLU	LİSELER MH. DEĞIRMEN YOLU. 1.SK. NO:14/A
OSMANİYE	MERKEZ	BİRLİK SOĞUTMA	İLYAS GÜZEL	RAUFBEY MAH AKYAR CAD NO:204
	KADİRLİ	SADI AYDIN	SADI AYDIN	ATATÜRK CD.SAVRUN MH.18.SK.NO:3
RIZE	ARDEŞEN	EVRİM ELEKTRONİK	CAHİT DEMİRÇELİK	YENİ MH.ATATTÜRK CD.NO:85/B
	MERKEZ	TOPRAK TEKNİK	FATİH TOPRAK	TOPHANE MH.KACKAR CD.NO:19
SAKARYA	MERKEZ	KUZEY SOĞUTMA	ZEKİ BULUT	SEMERCİLER MAH.A. NECDET GÜVEN CD. 786.SK.NO:1
SAMSUN	UZUNKÖPRÜ	MERKEZ TEKNİK SERVİŞ	HAŞİM EMİRBUYURAN	ZEYTİNİK MH.BARIŞ BULV.NO:118/A
	BAFRA	KARATAŞ TİCARET	İLHAN KARATAŞ	KIZILIRMAK MH. FEVZİ ÇAKMAK SK. NO:18
	MERKEZ	SAYLOR ELEKTRONİK	MUSTAFA KÜÇÜKYILMAZ	FEVZİ ÇAKMAK MH. LİSE CD. NO:52
SİIRT	KURTALAN	AKSOY SOĞUTMA LTD.STİ.	FIRAT AKSOY	ULU CAMİ ALTI NO:20
SINOP	MERKEZ	DEMİREL TİCARET	RAFET DEMİREL	MEYDANKAPI MH.NALBANT SK.NO:5
	AYANCIK	İLKAY SOĞUTMA	MEHMET YILMAZ	YALI MH.ŞADIRVAN CD.NO:46
	BOYABAT	ÖZTÜRK BEYAZ EŞYA	BAYRAM ÖZTÜRK	GÖKDERE MH. YUSUF KEMAL BEY CD. NO:24 PTT KARŞİSI

SİVAS	MERKEZ	SOĞUK TEKNİK	AHMET ÜSTÜNDAĞ	ESKİ KALE MAH. SARAY YOLU SK. BÜYÜK DOĞU APT. ALTI. NO:8 /A	0 346 221 17 89
ŞANLI URFA	VIRANŞEHİR	POYRAZ BEYAZ EŞYA EYYÜP ÇAKAN YENİŞEHİR MH.	1619 SK. NO:8/B 0 414 511 68 47
	ÇEYLANPINAR	ASAN SOĞUTMA MUZAFFER	ASAN CUMHURİYET CD.	NO:120 0 414 471 44 10
	MERKEZ	SERVAN BOBİNAJ HALİL ŞEKER YENİŞEHİR MAH. 225	SK EMİR APT. ALTI NO:19/A 0 414 312 93 27
	BİRECİK	YARAŞİR SOĞUTMA FATİH	YARAŞİR MEYDAN MH. KÖPRÜ ÇIKIŞI NO:9 0 414 652 36 38
ŞIRNAK	MERKEZ	ZEYREK SOĞUTMA	SAMİ ZEYREK	BAHÇELİEVLER MH A . GAFFAR OKAN CAD .NO 3	0 486 216 21 53
	CİZRE	SAÇAN SOĞUTMA	HÜSEYİN SAÇAN	ŞAHDERE SK.NO:15	0 486 616 50 01
TEKİRDAĞ	SARAY	BATI TEKNİK	BÜLENT BARLAS	YENİ MH.TAKSİM CD.NO:9	0 282 768 69 34
	ÇORLU	BEYAZ TEKNİK	ŞÜKRÜ İREZ	REŞADIYE MAH.ŞINASI KURŞUN CD.3.SK.NO:15/A	0 282 653 83 43
	MERKEZ	KURAL SOĞUTMA	NURKAN KURAL	ERTUĞRUL MAH. GÜNEŞ SK. TÜFEKÇİ KENAN USTA PSJ. NO:7/8	0 282 262 55 46
TOKAT	ERBAA	EREL SOĞUTMA	ERKAN CİVELEK	GAZİOSMAN PAŞA MAH.HÜKÜMET CD.NO:84	0 356 716 17 70
	TURHAL	GÜÇLÜ SOĞUTMA	YAŞAR ALEMDAR	CELAL MH. TUNA SK. NO:11	0 356 276 39 66
	MERKEZ	ÖZGÜL TEKNİK SERVİS	RIZA ÖZGÜL	YEŞİL IRMAK MH. ÇAĞ GÖLÜ CD. NO:21/B	0 356 214 60 70
TRABZON	VAKFIKEBİR	COŞKUN BIYIKLI	COŞKUN BIYIKLI	KEMALİYE MAH.FATİH CD. NO:32	0 462 841 48 31
	MERKEZ	KENAN TEKNİK	HAMİ KENAN	TOKLU MH.KURAN KURSU CD.HASAN TAHSİN SK.TÜRKLER APT.ALTI NO:2/B	0 462 224 31 63
	AKÇAABAT	TOPALOĞLU SOĞUTMA	VELİ TOPAL	İNÖNÜ CD. NO:51	0 462 228 51 98
UŞAK	MERKEZ	METİN SOĞUTMA	HAKAN METİN	2.CANSEL SK. NO:3	0 276 223 96 35
VAN	ERCİŞ	ETALAR SOĞUTMA	EROL ETA	ESKİ EMNİYET KARAKOLU ARKASI	0 432 351 38 38
	MERKEZ	YILMAZ TEKNİK	ÜBEYT YILMAZ	ZÜBEYDE HANIM CD. ÖZ DOLUNAY SİTESİ ALTI NO:6	0 432 212 03 14
YALOVA	ALTINOVA	DOĞAN TEKNİK SOĞUTMA	ORHAN DOĞAN	CUMHURİYET MH. MERKEZ DURAK KARŞ. NO:29/ A	0 226 461 26 21
	MERKEZ	EVSAN SERVİS	MELİH - SERAP DOĞAN	CUMHURİYET CD.YILDIZ SK NO:27	0 226 811 18 11
YOZGAT	SORGUN	SES SOĞUTMA	AHMET TAŞKINOĞLU	BAHÇELİEVLER MAH.ATATÜRK BULVARI OKULLAR APT.NO:1	0 354 415 80 81
	MERKEZ	TUNCER SOĞUTMA	SİNAN-METİN TUNCER	MEDRESE MAH.MAHMUT TURAN SK.SARGIN APT.ZEMİN KAT NO:2	0 354 212 68 19
ZONGULDAK	MERKEZ	EROL ELEKTRONİK	İSMAİL EROL	MEŞRUTİYET MH.TAHİRKARAOĞUZ SK.UZUN ÇARŞI K1 NO:104	0 372 253 76 06
	EREĞLİ	ERŞAN SOĞUTMA	YAŞAR ARSLAN	BAĞLIK MAH. ŞEHİT RIDVAN CD. .NO: 37 / D	0 372 316 10 05
	ÇAYCUMA	UĞUR SOĞUTMA	AYNUR-GÖKHANKOYMAT	YENİ MH. HANIMELİ SK. BİLKENT SİTESİ YANI. KOYMAT APT. NO:1	0 372 615 68 07

Silverline End. ve Tic. A.Ş.