SN28350 - Dishwasher SIEMENS - Free user manual and instructions
Find the device manual for free SN28350 SIEMENS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Model | SN28350 |
| Brand | Siemens |
| Dimensions (H x W x D) | 84.5 cm x 60 cm x 60 cm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Efficiency Class | A++ |
| Capacity | 13 place settings |
| Noise Level | 44 dB(A) re 1 pW |
| Programs | Eco, Auto, Intensive, Normal, Quick, Rinse |
| Water Consumption per Cycle | 9.5 L (Eco program) |
| Annual Energy Consumption | 260 kWh |
| Annual Water Consumption | 2660 L |
| Drying Performance | Condensation drying |
| Noise Emission Class | C |
| Safety Features | AquaStop, Anti-flood system, Child lock |
| Maintenance | Clean filter, rinse aid refill, spray arm cleaning, descaling |
| Spare Parts Availability | Serviceable, spare parts for 10 years after discontinuation |
| Repair Index | 8.5/10 (based on user rating) |
| Installation Type | Built-in, adjustable feet |
Frequently Asked Questions - SN28350 SIEMENS
How to install the dishwasher?
Ensure the dishwasher is placed on a level floor. Connect the water inlet hose to the cold water supply (max 60°C). Connect the drain hose to the sink drain. Plug into a grounded outlet. Level the appliance using the adjustable feet. Refer to the manual for detailed steps.
Which programs are available?
The dishwasher offers Eco, Auto, Intensive, Normal, Quick, and Rinse programs. Eco is for energy-saving, Auto adjusts to soil level, Intensive for heavily soiled items, Normal for everyday, Quick for light loads, and Rinse for pre-rinse.
What should I do if the dishwasher does not start?
Check if the door is closed properly. Ensure the appliance is plugged in and the circuit breaker is on. Verify that the water supply is open. Press the start button for 3 seconds to reset. If the issue persists, contact customer service.
How to clean the filter?
Remove the lower basket. Turn the filter system counterclockwise and lift out. Rinse under running water. Reassemble and turn clockwise to lock. Clean the filter after every few cycles.
How to refill rinse aid?
Open the rinse aid dispenser lid. Fill with rinse aid up to the 'max' mark. Close lid. Adjust the dosage setting (usually 1-6) according to water hardness. Check the indicator on the control panel.
What does the AquaStop feature do?
AquaStop is a safety system that prevents water damage. It includes a double-walled hose with a safety valve. In case of a leak, the system shuts off the water supply automatically.
How to load the dishwasher for best results?
Place items so water can reach all surfaces. Include items upside down. Do not block spray arms. Place large items in lower basket and delicate glasses in upper basket. Use cutlery basket for utensils.
Why is there water left in the bottom after a cycle?
Check if the filter is clogged. Ensure the drain hose is not kinked. The drain pump may be faulty. Run a rinse program to clear any blockage. If problem persists, service is needed.
How to descale the dishwasher?
Use a dishwasher descaler. Place it in the detergent compartment and run an empty hot program (e.g., Intensive 70°C). Alternatively, use citric acid. Descale every 3-6 months depending on water hardness.
Is the dishwasher suitable for built-in installation?
Yes, the model SN28350 is designed for built-in installation. It fits under a standard countertop with adjustable feet for leveling. A ventilation gap is required. Ensure the surrounding cabinetry is heat resistant.
User questions about SN28350 SIEMENS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SN28350 - SIEMENS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SN28350 by SIEMENS.