5050A - Subwoofer GENELEC - Free user manual and instructions
Find the device manual for free 5050A GENELEC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Genelec |
| Model | 5050A |
| Dimensions (H x W x D) | 508 x 380 x 400 mm (20 x 15 x 15.7 in) |
| Weight | 20 kg (44 lbs) |
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Amplifier Power | 250 W |
| Driver Size | 10" (254 mm) woofer |
| Frequency Response | 30 Hz - 100 Hz |
| Low-Pass Filter | Adjustable, 50-100 Hz |
| Input Connections | XLR balanced (2), RCA (2) |
| Maximum SPL | 110 dB |
| Cabinet Material | Aluminum |
| Placement | Floor-standing, near monitors |
| Usage | Professional studio monitoring |
| Cleaning | Use a dry cloth. Avoid liquids. |
| Safety Precautions | Do not expose to rain or moisture. Ensure adequate ventilation. |
| Spare Parts & Repairability | Contact Genelec authorized service centers. |
Frequently Asked Questions - 5050A GENELEC
How do I connect the Genelec 5050A to my studio monitors?
Connect the line-level output from your audio interface to the XLR inputs on the subwoofer. Then use the XLR outputs on the subwoofer to connect to your monitors. Adjust the crossover frequency and level using the controls on the rear panel.
What is the ideal placement for the 5050A subwoofer?
Place the subwoofer on the floor, preferably centered between your main monitors or slightly off to one side. Avoid corners to prevent excessive bass buildup. Maintain at least 10 cm (4 in) clearance around the amplifier vents.
Can I use the 5050A with consumer audio equipment?
Yes, the 5050A accepts RCA inputs in addition to XLR. However, ensure the signal level is appropriate. The subwoofer is designed for professional line-level signals (+4 dBu) but can work with consumer levels (-10 dBV) with reduced output.
How do I set the crossover frequency on the 5050A?
Use the low-pass filter knob on the rear panel. Set it to match the lower frequency limit of your main monitors. A typical starting point is 80 Hz. Adjust based on room acoustics and personal preference.
What should I do if the subwoofer produces no sound?
Check the power cable connection and ensure the subwoofer is powered on. Verify that the input cables are securely connected and the audio source is active. Also inspect the fuse on the rear panel; replace if blown.
Is the 5050A subwoofer magnetically shielded?
Yes, the 5050A features magnetic shielding to allow safe placement near CRT monitors and other sensitive equipment without interference.
Can I daisy-chain multiple 5050A subwoofers?
Yes, you can connect multiple subwoofers via the XLR outputs. Use the LINK output to daisy-chain. However, ensure the total load does not exceed the amplifier's capability.
How do I clean the Genelec 5050A?
Use a soft, dry cloth to gently wipe the cabinet. Do not use solvents, abrasive cleaners, or water. For the grille, a vacuum with a soft brush attachment can remove dust.
What is the warranty period for the 5050A?
Genelec offers a 5-year limited warranty from the date of purchase. Warranty terms may vary by region. Keep your receipt for service requests.
Can I repair the 5050A myself?
No, internal components are not user-serviceable. Opening the unit voids the warranty and can be dangerous. Contact an authorized Genelec service center for repairs and spare parts.
User questions about 5050A GENELEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual 5050A - GENELEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5050A by GENELEC.