AKT110IX - Kitchen WHIRLPOOL - Free user manual and instructions
Find the device manual for free AKT110IX WHIRLPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Hob |
| Brand | Whirlpool |
| Model | AKT110IX |
| Number of Burners | 4 |
| Material | Stainless Steel |
| Dimensions (W x D x H) | 580 x 510 x 55 mm |
| Cutout Dimensions (W x D) | 560 x 490 mm |
| Weight | 8 kg |
| Power Supply | Gas (Natural/Propane) + 220-240V AC for ignition |
| Gas Type | Natural Gas (convertible to LPG) |
| Ignition System | Automatic electric ignition |
| Safety Features | Flame failure safety device on all burners |
| Control Knobs | Front-mounted, metallic finish |
| Pan Supports | Removable, cast iron |
| Cleaning | Wipe with damp cloth; remove pan supports for washing |
| Energy Rating | Class A |
| Certifications | CE, UKCA |
| Warranty | 2 years |
| Repairability Index | 8 out of 10 |
| Spare Parts Availability | Yes, through authorized service centers |
Frequently Asked Questions - AKT110IX WHIRLPOOL
Can I use the AKT110IX with liquefied petroleum gas (LPG)?
Yes, the hob is convertible to LPG. The conversion kit is usually supplied or available from the manufacturer. Refer to the gas adjustment instructions in the manual.
How do I clean the stainless steel surface?
Use a soft damp cloth with mild detergent. Avoid abrasive cleaners or scouring pads. For stubborn stains, use a specialized stainless steel cleaner. Always wipe in the direction of the grain.
What is the cutout size required for installation?
The required cutout dimensions are approximately 560 x 490 mm. Ensure the worktop is heat-resistant and there is proper ventilation. Consult the installation guide for exact measurements.
Why won't the burner ignite?
Check that the gas supply is on and the ignition sparking is happening. Clean the burner cap and ignitor electrode with a toothbrush. If no spark, verify the power cord is plugged in. If problem persists, contact Whirlpool service.
How do I replace the gas injectors?
Replacing injectors is necessary when converting gas type. Turn off gas and electricity. Unscrew the burner heads to access injectors. Use the appropriate injector for your gas type. Refer to the manual for injector specifications.
What should I do if the flame is yellow or uneven?
Yellow flame indicates incomplete combustion. Clean the burner cap and injector ports. Ensure the burner crown is properly seated. Also check that the gas regulator is set correctly. If issue continues, consult a qualified technician.
Are the pan supports dishwasher safe?
No, the cast iron pan supports should be hand washed with warm soapy water. Dishwasher detergent can damage the finish. Dry thoroughly after cleaning to prevent rust.
Can I install the hob over an oven?
Yes, but ensure there is a sufficient gap for ventilation. The hob must be installed over a built-in oven that has a cooling fan. Follow the installation manual for minimum clearance.
What is the recommended minimum distance from side walls?
For safety, maintain at least 50 mm from side walls or cabinets. Above the hob, ensure a minimum of 650 mm clearance to a horizontal surface or range hood. Refer to local regulations.
Where can I find the serial number?
The serial number and rating plate are located on the underside of the hob. You may need to remove the hob partially to view it. Always quote the model and serial when contacting support.
User questions about AKT110IX WHIRLPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Kitchen in PDF format for free! Find your manual AKT110IX - WHIRLPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AKT110IX by WHIRLPOOL.