Hydro Beam X12 - Lighting American DJ - Free user manual and instructions
Find the device manual for free Hydro Beam X12 American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Beam Light |
| Brand | American DJ |
| Model | Hydro Beam X12 |
| Light Source | 400W LED |
| Beam Angle | 2° |
| Pan Range | 540° |
| Tilt Range | 270° |
| Colors | 14 dichroic filters + white |
| Gobos | 17 rotating gobos + open |
| Prism | 8-facet prism rotating |
| DMX Channels | 16 or 18 selectable |
| Control Modes | DMX512, Sound Active, Master/Slave, Auto |
| Display | LCD menu with touch buttons |
| Power Consumption | 500W max |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 330 x 250 x 500 mm |
| Weight | 12 kg |
| IP Rating | IP20 (indoor use only) |
| Housing | High-impact plastic and metal |
| Cooling | Active fan cooling |
| Maintenance | Clean lens with soft cloth; check fans monthly |
| Safety | Use safety cable; mount on stable truss |
| Spare Parts | LED module, gobos, color wheels, fans, power supply |
| Repairability | Modular design; user-replaceable parts |
| General Information | Professional beam light for stage and events |
Frequently Asked Questions - Hydro Beam X12 American DJ
How do I reset the Hydro Beam X12 to factory settings?
Press and hold the MENU button for 3 seconds to access the main menu. Navigate to SETTINGS > FACTORY RESET and confirm. The fixture will restart.
What DMX channels does the Hydro Beam X12 use?
The fixture supports 16 or 18 DMX channels depending on the mode. Refer to the channel chart in the manual for detailed mapping.
How do I set the DMX address?
Press MENU to enter setup, select DMX ADDRESS, then use UP/DOWN to set the desired address (001-512). Press ENTER to confirm.
Can I use the Hydro Beam X12 outdoors?
No, the fixture has an IP20 rating and is designed for indoor use only. Exposure to moisture may damage the unit.
How do I clean the lens?
Use a soft, dry cloth to gently wipe the lens. For stubborn dirt, slightly dampen the cloth with water or a mild glass cleaner. Avoid abrasive materials.
What is the replacement procedure for the LED module?
Disconnect power, remove the back cover, unscrew the LED module, disconnect cables, and replace with a new module. Ensure proper thermal paste application. Contact American DJ support for exact instructions.
How do I enable sound active mode?
Press MENU, navigate to SOUND ACTIVE and select ON. The fixture will respond to built-in microphone. Adjust sensitivity in SOUND SENS.
Why is my fixture not moving?
Check that PAN/TILT LOCK is off in the menu. Also verify DMX cable connection and that the correct control mode is selected. If still not moving, a motor or board issue may exist.
Can I use a different bulb?
No, the fixture uses a built-in LED module that is not user-serviceable. Only replace with an authorized American DJ LED module.
How do I update the firmware?
Firmware updates are not user-performed. Contact American DJ technical support for latest firmware and update procedures.
User questions about Hydro Beam X12 American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Hydro Beam X12 - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Hydro Beam X12 by American DJ.