AT-5000 - Detector Amprobe - Free user manual and instructions

Product Type	Wire Tracer & Circuit Breaker Finder
Brand	Amprobe
Model	AT-5000
Dimensions (approx.)	9.0 x 3.5 x 2.0 inches
Weight (approx.)	1.2 lbs (with batteries)
Power Supply	2 x 9V alkaline batteries
Main Functions	Tracing wires, locating breaks/shorts, identifying circuit breakers, detecting live/meter circuits
Trace Depth	Up to 5 feet (1.5 m) depending on conditions
Frequency Selection	Multiple frequencies (e.g., Low, High, Auto)
Signal Output	Selectable: High, Low, or Auto
Display Type	Digital LCD with backlight
Audible Indication	Variable tone based on signal strength
Safety Rating	CAT III 600V (receiver), CAT IV 300V
Water/Dust Resistance	IP54 (splash proof, limited dust ingress)
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Maintenance	Replace batteries as needed; clean with dry cloth; store in dry place
Spare Parts & Repairability	Contact Amprobe support for replacement probes, batteries; unit is not user-serviceable internally
Included Accessories	Transmitter, receiver, test leads, alligator clips, carrying case, user manual
Warranty	2 years limited warranty

Frequently Asked Questions - AT-5000 Amprobe

What is the Amprobe AT-5000 used for?

The Amprobe AT-5000 is a wire tracer and circuit breaker finder used to locate wires, identify breakers, and find breaks or shorts in energized or de-energized circuits.

What type of batteries does the AT-5000 use?

The AT-5000 uses two 9V alkaline batteries (one for the transmitter, one for the receiver).

Can the AT-5000 trace wires through walls?

Yes, it can trace wires through walls, floors, and ceilings up to a depth of about 5 feet, depending on the material and signal frequency used.

How do I identify a specific circuit breaker with the AT-5000?

Connect the transmitter to the circuit (using the test leads or alligator clips), select a mode, then scan the breaker panel with the receiver. A strong signal indicates the correct breaker.

What does the LCD display show?

The LCD shows signal strength graphically and numerically, battery status, frequency setting, and mode (e.g., High, Low, Auto).

Is the AT-5000 safe for live circuits?

Yes, it is rated CAT III 600V (receiver) and CAT IV 300V, making it safe for use on live residential and commercial circuits when used properly.

How do I clean and maintain the AT-5000?

Wipe the unit with a dry, soft cloth. Do not use liquids or abrasives. Remove batteries when not in use for extended periods. Store in a dry location.

Can I replace the test probes?

Yes, the test leads and alligator clips are detachable and can be replaced if damaged. Contact Amprobe or an authorized dealer for spare parts.

What does the audible tone indicate?

The receiver emits a variable tone that changes in pitch and volume based on the signal strength. A higher pitch indicates a stronger signal, helping you locate the target wire.

Why is my AT-5000 not turning on?

Check that both batteries are installed correctly and have sufficient charge. Replace old batteries as needed. If the unit still does not power on, contact Amprobe support.

USER MANUAL AT-5000 Amprobe

Person in brown overalls standing on grass next to a red measuring tool and a digital device (no visible text or symbols)

No hassle warranty

No waiting.

No shipping charges.

Our commitment to high-quality products and customer service is demonstrated by our industry exclusive "No Hassle" warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.

(note: \$500 MSLP limit)

AT-5000 Professional Underground Cable / Pipe Locator System

Buried Utilities represent a major challenge to electricians who need to trace and trouble shoot such systems. They also represent a hazard to excavation crews. Improperly performed digging can cause cable or pipe damage resulting in personal injury, costly repairs and penalties. This product is faster and more accurate than what's available on the market today.

Using superior design and powerful software, the AT-5000 offers several new performance features, establishing them as the new standard for locating and pinpointing faults in the underground systems. Distance sensitive Left / Right indication guides the user to the exact location of the buried utilities which saves time and effort not available on standard locators.

The Signal Select and Distortion Alert provide superior accuracy by visually indicating a clean signal of the traced line, versus "ghost" and 'return' path of false signals coming from the neighboring lines, and keeping the user on the target line.

The core of the AT-5000 Utility Locating Systems is the ergonomically designed handheld receiver. Designed for comfort, the lightweight receiver is balanced for all day use. The receiver's bright color display is complete with intuitive, easily read graphics that can be viewed in all lighting conditions.

AMPROBE®

Data Sheet

Locates underground energized and de-energized wires, cables and ■ pipes, eliminates exploratory digging in parking lots or under floors for buried pipes and wires

New technology makes tracing much faster, accurate and unambiguous when compared to standard locators:

• Signal Select and Distortion Alert icon indicates clean signal of the traced line, versus "ghost" and 'return' path signals coming from the neighboring lines
• Forward-looking Guidance Coil alerts for bends and "T"
• Distance Sensitive Left / Right Guidance guides the user to the exact location of the buried utilities and eliminates "blind" searches for the line

Three testing modes for best accuracy:

• Passive Power Mode (50, 60, 100 and 120 Hz) – tracing energized lines conducting current
• Passive Radio Mode (RF) – using surrounding radio waves to trace underground object
• Active Mode - T-5000 signal generator with broad frequency selection between 491 Hz and 166 kHz with induction mode or directly connected to the cable with test leads or optional clamp

Active Mode Depth measurement up to 20' (6m) ■

Bright Color ¼ VGA receiver graphical display and audible signal indicators provide clear reading to the user

■ Strong testing signal generated by 10 Watt variable output transmitter for dependable depth and distance locating

■ Powerful Digital Signal Processing in both receiver and transmitter provides outstanding performance in tracing when compared to analog devices

■Automatic or manual gain mode allows respectively quick and easy tracing of the line or precise pinpointing of the fault

■ Receiver Bluetooth® wireless communication for downloading relevant images and archiving of meaningful digital information (previous survey results)

■Ground Fault Locating with A-Frame adapter for power and telecom cables (optional for AT-5000)

■ Precise pinpointing of buried services and exceptionally fast sound and meter response

■ Rugged durable construction, weatherproof and drop resistant to 3'

■ Includes receiver (R-5000), transmitter (T-5000), connection cable, ground stake, ground cable, and carrying case

Person holding a red handheld device on a grassy field, no visible text or symbols

Red and black handheld metal detector with a matching case (no visible text or symbols)

AT-5000 Professional Underground Cable / Pipe Locator System

Data Sheet

Specifications

Depth Measurement 16 ft
Passive Tracing Frequencies 50, 60, 100 and 120 Hz
Transmitter frequency Adjustable from 491 to 166 kHz
A-Frame Ground Fault Locating Optional
R-5000 Active Frequencies (Hz)	491, 982, 8.44k, 9.82k, 35k, 82k, 83k (North America)491, 512, 577, 640, 982, 8k, 8.44k, 9.82k, 35k, 65.5k, 82k, 83k
R-5000 Passive Frequencies (Hz)	50, 60, 100, 120, RF (14k-21k)Extended and special frequency sets available
R-5000 Depth Display Accuracy	0-10ft: ±(5%+2") under ideal field conditions10-20ft: ±10% under ideal field conditions
R-5000 Depth Range	Maximum 20ft (600 cm)
R-5000 Gain Adjustment	Automatic & manual with pushbutton centering
R-5000 Controls	Four-way navigation key and soft keys
R-5000 Display Indicators	Frequency Audio volume, battery condition, Guidance CompassTM, Distortion AlertTM, Signal SelectTM, signal strength, Distance Sensitive Left/Right GuidanceTM, menu softkey, frequency softkey
R-5000 Line ID	Signal Select, Guidance Compass, Distortion Alert
R-5000 Display	1⁄4 VGA Bright Color
R-5000 Antenna	Distance Sensitive Left/Right Guidance
R-5000 Data Acquisition	Internal data logging memory
R-5000 Operating Temperature	-4°F to +122°F (-20°C to +50°C)
R-5000 Battery Type	Li-ion rechargeable9 AA Alkaline
R-5000 Battery Life	30 hours continuous
R-5000 Battery Check	Continuous display
R-5000 Dimensions	8 1⁄4" W x 13 1⁄4" H x 29" L (21.0cm x 33.7 cm x 74.3cm)
R-5000 Weight	4.9 lb (2.2 kg)
R R-5000 regulatory Compliance	FCC, CE
R-5000 Environmental	IP54
T-5000 Output Frequencies (Hz)	491, 982, 8.44k, 9.82k, 35k, 82k, 83k (North America)491, 577, 640, 982, 8.192k, 8.44k, 9.82k, 35k, 82k, 83kExtended and special frequency sets available
T-5000 Output Power	Variable to 10W
T-5000 Simultaneous Output	Up to three active frequencies
T-5000 Controls	Frequency select, measurement units (mA, Volts, Ohms, Watts), output power, Signal SelectTM, menu, 4-way navigation, select, SFL, On/Off
T-5000 Display Indicators	Battery status, audio volume, output mode, frequency setting, frequency output, % output in SFL or induction mode, output graph, loop resistance graph
T-5000 Display	1/8 VGA monochrome
T-5000 Battery Type NiMH rechargeable or six (6) D alkaline
T-5000 Battery Life	6 - 12 hours continuous use, depending on power level and line conditions
T-5000 Operation Temperature	-4°F to +122°F (-20°C to +50°C)
T-5000 Dimensions	11" W x 6 3⁄4" H x 9" L (27.9 cm x 17.1 cm x 22.9 cm)
T-5000 Weight	8.24 lbs. (3.7 kg)
T-5000 Regulatory Compliance	FCC, CE
T-5000 Environmental	IP54

AT-5000 Professional Underground Cable / Pipe Locator System

Data Sheet

Included Accessories

Receiver (R-5000), Transmitter (T-5000), connection cable, ground stake, ground cable, and carrying case

Optional Accessories

A-5000 A-Frame Ground Fault Locator

SC-5000 4" Signal Clamp for AT-5000 series

M-5000 Sonde Pipe transmitter for AT-5000 series

BT-5000 Rechargeable battery pack for transmitter AT-5000 series (requires EPS-5000 charging kit)

Assorted electrical testing equipment including a red clamp, black box, and various probes (no visible text or symbols)

Amprobe® Test Tools

website: www.Amprobe.com

email: [e-mail]

Everett, WA 98203

Tel: 877-AMPROBE

Amprobe® Test Tools Europe

Amprobe Test Tools Europe

Beha-Amprobe GmbH

In den Engematten 14

79286 Glottertal, Germany

Tel.: [phone] - 0

©2009 Amprobe Test Tools. All rights reserved. 09/2009 3520648A