Instant IAP-104 - Access Point Aruba - Free user manual and instructions
Find the device manual for free Instant IAP-104 Aruba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Instant Access Point |
| Model | IAP-104 |
| Brand | Aruba |
| Dimensions (W x D x H) | 150 x 150 x 30 mm |
| Weight | Approximately 0.5 kg |
| Power Supply | 802.3af PoE or 12V DC adapter |
| Wireless Standard | IEEE 802.11a/b/g/n/ac Wave 2 |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | Up to 867 Mbps (5 GHz) + 300 Mbps (2.4 GHz) |
| Number of Antennas | 2 internal antennas (2x2 MIMO) |
| Physical Interfaces | 1 x 10/100/1000 Ethernet port (PoE IN) |
| Management | Web-based GUI, Aruba Instant UI |
| Security Features | WPA2/WPA3, 802.1X, MAC filtering |
| Mounting | Wall or ceiling mount (kit included) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, Ethernet, Wireless activity |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - Instant IAP-104 Aruba
How do I set up the Aruba Instant IAP-104 for the first time?
Connect the access point to your network via PoE or power adapter. Power it on and connect to the default SSID labeled on the device. Open a web browser and navigate to the default IP (typically 192.168.1.1) to access the setup wizard. Follow the on-screen instructions to configure your network.
What is the default login username and password for the IAP-104?
The default username is admin and the default password is password (or as printed on the device label). You should change these upon first login for security.
Can the IAP-104 be used with a non-Aruba switch?
Yes, it can be used with any standard 802.3af PoE switch or injector. However, for full management features, an Aruba controller or Aruba Instant cluster is recommended.
How do I reset the IAP-104 to factory defaults?
Press and hold the reset button (usually a small pinhole) on the device for at least 10 seconds while power is on. The LEDs will flash, indicating a reset. Release the button and the access point will reboot with factory settings.
What wireless security modes are supported?
The IAP-104 supports WPA2-PSK, WPA3-PSK, WPA2-Enterprise (802.1X), and WPA3-Enterprise. You can configure these in the wireless security settings of the web interface.
Can I mount the IAP-104 on a wall?
Yes, the device comes with a mounting bracket compatible with standard wall plates or ceiling mounts. Use the provided screws and anchors for secure installation. Ensure the mount is fixed firmly to avoid dropping.
What is the maximum range of the IAP-104?
Typical indoor range is up to 100 meters (328 feet) in open space, but actual performance depends on building materials and interference. For best results, place the access point centrally and away from obstructions.
How many clients can the IAP-104 support simultaneously?
It can support up to 100 wireless clients under normal conditions. However, performance may degrade with heavy traffic. For higher density, consider adding more access points.
How do I update the firmware on the IAP-104?
Download the latest firmware from the Aruba Support Portal. Log into the web interface, go to Administration > Firmware Upgrade, upload the file, and follow the prompts. Do not power off during the update.
What should I do if the IAP-104 LED is not lit?
Check the power source (PoE or adapter) and cable connections. Ensure the switch port is providing PoE. If using PoE, verify the switch supports 802.3af. If still not lit, try a different cable or power source.
User questions about Instant IAP-104 Aruba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual Instant IAP-104 - Aruba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Instant IAP-104 by Aruba.