GS 605 B - Dishwasher Elektra Bregenz - Free user manual and instructions
Find the device manual for free GS 605 B Elektra Bregenz in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Elektra Bregenz |
| Model | GS 605 B |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | Approximately 50 kg |
| Place Settings | 12 place settings |
| Energy Efficiency Class | A+ (typical) |
| Annual Energy Consumption | Approximately 270 kWh |
| Water Consumption per Cycle | Approximately 12 liters |
| Noise Level | 49 dB(A) |
| Number of Programs | 6 (Eco, Intensive, Normal, Quick, Rinse, Glass) |
| Power Supply | 220-240 V, 50 Hz |
| Total Power Consumption | 1900-2100 W |
| Water Softener | Built-in with adjustable hardness setting |
| Delay Start | Up to 24 hours |
| Rinse Aid Dispenser | Yes, adjustable dosage |
| Detergent Dispenser | Yes, with pre-wash compartment |
| Rack System | Stainless steel, adjustable upper basket |
| Cutlery Basket | Yes, removable |
| Filter System | Three-part filter (self-cleaning) |
| Drying System | Condensation drying |
Frequently Asked Questions - GS 605 B Elektra Bregenz
How do I start a wash cycle on the Elektra Bregenz GS 605 B?
Load the dishes, add detergent and rinse aid, select a program using the program selector knob, press the Start button. The machine will start after a few seconds.
What should I do if the dishwasher does not drain?
Check the filter for blockages, clean it under running water. Also inspect the drain hose for kinks or clogs. Ensure the drain pump is not jammed by small objects.
How can I clean the filters of the GS 605 B?
Remove the lower rack, unscrew the cylindrical filter, lift out the flat filter. Rinse all parts under running water with a soft brush. Reassemble in reverse order.
Why does the dishwasher leave water spots on glasses?
This may be due to hard water. Adjust the water softener setting according to your water hardness. Also ensure rinse aid is filled and the dosage is adequate.
What does the error code E1 mean?
Error E1 indicates a water inlet problem. Check that the water tap is open, the inlet hose is not kinked, and the water pressure is adequate. If the problem persists, contact service.
How do I set the water hardness level?
Refer to the manual to find the water hardness in your area. Press and hold the Program button for 3 seconds, then use the program selector to choose the appropriate level (0-5). Confirm by pressing Start.
Can I use tablet detergents in the GS 605 B?
Yes, you can use all-in-one tablets. Place them in the detergent dispenser. If the program is short, tablets may not dissolve completely; consider using powder for shorter cycles.
How do I clean the spray arms?
Remove the spray arms by unscrewing the nut (upper arm) or pulling upward (lower arm). Rinse under water and use a toothpick to clear clogged nozzles. Reinstall securely.
What is the maximum load for the upper basket?
The upper basket is designed for glasses, cups, and small plates. Do not overload; max load is approximately 8 kg evenly distributed. Avoid blocking the spray arm.
How do I activate the delay start feature?
After selecting a program, press the Delay button repeatedly to set the desired delay (1-24 hours). Then press Start. The display will show the remaining time including delay.
User questions about GS 605 B Elektra Bregenz
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual GS 605 B - Elektra Bregenz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS 605 B by Elektra Bregenz.