NA4520W - Washing machine Speed Queen - Free user manual and instructions
Find the device manual for free NA4520W Speed Queen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Top-load washing machine |
| Brand | Speed Queen |
| Model | NA4520W |
| Capacity | 3.2 cubic feet |
| Dimensions (W x D x H) | 27 x 27 x 44 inches |
| Net Weight | 120 lbs |
| Power Supply | 120 V, 60 Hz, 10 A |
| Controls | Mechanical timer with rotary dials |
| Cycle Selection | Permanent Press, Delicate, Normal, Heavy Duty |
| Water Levels | Auto load sensing with manual adjustment |
| Wash Action | Agitator (dual-action) |
| Spin Speed | 710 RPM |
| Tub Material | Stainless steel |
| Cabinet Finish | White enamel |
| Energy Efficiency | ENERGY STAR qualified |
| Water Usage | Approx. 19 gallons per load (normal cycle) |
| Noise Level | 65 dB (wash), 72 dB (spin) |
| Safety Features | Lid lock, unbalanced load detection, overflow protection |
| Maintenance | Clean lint filter monthly; check hoses annually |
| Repairability | Modular design with replaceable belts, pumps, and motors |
| Warranty | 3 years parts and labor, 10 years on tub |
| Included Accessories | Hot and cold water hoses, installation manual |
Frequently Asked Questions - NA4520W Speed Queen
How do I start a wash cycle on my Speed Queen NA4520W?
Select the desired cycle and water level using the rotary dials, then pull the timer knob outward to start. The machine will fill, agitate, drain, and spin automatically.
What should I do if the machine doesn't drain?
First, check the drain hose for kinks or clogs. Ensure the drain standpipe height is between 36 and 96 inches. If the problem persists, the pump may be blocked or faulty.
How can I clean the lint filter?
The lint filter is located inside the wash basket near the top. Remove it by pulling upward, rinse under warm water, and snap it back into place. Clean after every 10 loads.
What does the lid lock feature do?
The lid lock prevents the lid from being opened during the spin cycle for safety. It engages automatically at high spin speeds. The lid can be opened during filling or when the machine is paused.
Why is my machine vibrating excessively?
Ensure the machine is level on a sturdy floor. Adjust the leveling legs under the machine. Also, avoid overloading or large imbalances in the load.
How do I pause or cancel a cycle?
To pause, push the timer knob in. Wait for the lid to unlock (if lid lock is engaged). To cancel, turn the timer dial to 'Off' or advance it to the end of the cycle.
What type of detergent should I use?
Use high-efficiency (HE) detergent for best results. Regular detergent can cause excessive sudsing. Use about 2 tablespoons for a normal load.
How do I winterize my washing machine?
Disconnect hoses and drain any water from the machine. Pour antifreeze (RV type) into the tub and run a short cycle. Store in a frost-free area if possible.
What are the recommended maintenance steps?
Monthly: clean lint filter and check hoses for leaks. Yearly: inspect belts and pump for wear, and run a cleaning cycle with hot water and a washing machine cleaner.
How long does a typical wash cycle take?
A normal cycle with heavy soil typically takes about 45 minutes including fill, wash, rinse, and spin. Delicate cycles are shorter, about 30 minutes.
User questions about NA4520W Speed Queen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual NA4520W - Speed Queen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NA4520W by Speed Queen.