WTN86200GC - Tumble drier BOSCH - Free user manual and instructions
Find the device manual for free WTN86200GC BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Bosch |
| Model | WTN86200GC |
| Energy Class | A+++ |
| Capacity | 8 kg |
| Dimensions (H x W x D) | 842 x 598 x 613 mm |
| Weight | 46 kg |
| Power Supply | 220-240 V / 50 Hz |
| Power Consumption (Annual) | 176 kWh |
| Noise Level | 64 dB (A) |
| Drying Technology | Heat Pump Condenser |
| Number of Programs | 15 |
| Anti-Crease Function | Yes |
| Self-Cleaning Condenser | Yes |
| Drying Sensor System | PerfectDry Sensor |
| Lint Filter Indication | Yes |
| Water Tank Full Indication | Yes |
| Child Lock | Yes |
| Door Opening Angle | 180° |
| Height Adjustment | Via adjustable feet |
| Reversible Door | Yes |
| Appliance Care | Clean lint filter per cycle; clean condenser monthly |
| Repair Index (Spare Parts Availability) | 7 years |
| Installation Type | Freestanding or Stackable (with kit) |
Frequently Asked Questions - WTN86200GC BOSCH
How do I clean the lint filter on my Bosch WTN86200GC dryer?
Open the door and pull the lint filter upward from the door opening. Rinse under running water or use a soft brush to remove lint. Dry completely before reinserting. Clean after each drying cycle.
Where is the condenser and how do I clean it?
The condenser is located at the bottom front behind the kickplate. Open the flap, pull out the condenser unit, rinse with warm water, and let it drain thoroughly. Replace after cleaning. Perform monthly.
Why does my dryer stop before clothes are dry?
This may be due to a full water tank, blocked lint filter, or overloaded drum. Empty the water container, clean the filter, and reduce load size. If persists, check the condenser for blockage.
What is the maximum load capacity for cotton programs?
The maximum load for cotton programs is 8 kg (dry weight). Overloading can cause poor drying performance and increase energy consumption.
Can I stack my dryer on top of a washing machine?
Yes, if you use the appropriate stacking kit (Bosch part number: WTZ11400). Ensure the washing machine has a stable top and the dryer is securely mounted.
How do I activate the child lock?
Press and hold the 'Start/Pause' button for approximately 3 seconds until the child lock symbol appears on the display. Repeat to deactivate.
What does the 'PerfectDry' sensor do?
The PerfectDry sensor continuously measures moisture levels in the drum and adjusts drying time automatically to achieve the selected dryness level, preventing over-drying.
How often should I empty the water tank?
Empty the water tank after each drying cycle or when the 'Water Tank Full' indicator lights up. The tank holds enough water for a full cycle, but draining prevents overflow.
My dryer takes too long to dry. What's wrong?
Check if the lint filter and condenser are clean. Ensure the room temperature is above 5°C and the venting is not blocked (if vented variant). For heat pump models, low ambient temperature can increase drying time.
How do I reset the dryer after a power cut?
Simply turn the program selector to 'Off' and then select your desired program again. Press 'Start/Pause' to resume. The dryer will restart from the beginning if interrupted.
User questions about WTN86200GC BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual WTN86200GC - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WTN86200GC by BOSCH.