CT1190 - Telephone Campomatic - Free user manual and instructions

Name: CT1190
Brand: Campomatic
Rating: 8.5 (211 reviews)

Find the device manual for free CT1190 Campomatic in PDF.

📄 15 pages

EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs

Pick your language and provide your email: we'll send you a specifically translated version.

This manual is not available in your language

Desired language Your email address

Product Type	Cordless Phone (DECT)
Model	CT1190
Brand	Campomatic
Dimensions (Base)	100 x 120 x 60 mm
Dimensions (Handset)	170 x 50 x 25 mm
Weight (Handset with batteries)	130 g
Power Supply	AC 220-240V, 50Hz for base; 2x AAA NiMH batteries for handset
Display	LCD with backlight
Keypad	Alphanumeric, 12 keys
Functions	Caller ID, call waiting, redial, speakerphone, phonebook (50 entries), intercom
Ringer Tones	10 polyphonic, adjustable volume
Range (Indoor)	Up to 50 m
Range (Outdoor)	Up to 300 m
Safety	Indoor use only; keep away from water and heat sources
Maintenance	Clean with dry soft cloth; do not use abrasive or solvent cleaners
Spare Parts	Batteries, power adapter, charging cradle available separately
Repairability	Batteries and power adapter user-replaceable; contact support for other repairs
General Information	Wall-mountable base; user manual included; warranty 2 years

Frequently Asked Questions - CT1190 Campomatic

How do I register the handset to the base?

Place the handset on the base cradle. The handset should automatically register. If not, press and hold the PAGE button on the base for 5 seconds until the base beeps, then press OK on the handset.

My phone has no dial tone. What should I check?

First, ensure the base is plugged into a working phone socket and power outlet. Check that the handset is registered and shows a signal bar. Replace batteries if low. Try a different phone socket to rule out line issues.

How can I store a contact in the phonebook?

Press the PHONEBOOK button, then ADD. Enter the name (up to 12 characters) using the keypad, press OK, then enter the phone number (up to 24 digits), and press SAVE.

Why is my battery draining quickly?

Battery life depends on usage. To extend life, avoid leaving the handset off the cradle for long periods, reduce backlight brightness, and replace old batteries with new NiMH AAA 600mAh rechargeable batteries.

How do I adjust the ringer volume?

When the phone is idle, press the VOLUME UP or VOLUME DOWN buttons on the handset. The ringer volume will change. You can also go to menu > RINGER SETTINGS to choose a tone and volume.

Can I use the phone during a power outage?

No, this phone requires AC power for the base. During an outage, the handset may still work briefly on battery but not for calls. Keep a corded phone as backup.

How do I delete all missed calls?

Press the CALL LIST button, then MISSED. Press OPTIONS and select DELETE ALL. Confirm by pressing YES.

What does the 'MUTE' button do?

During a call, pressing MUTE turns off the microphone so the caller cannot hear you. The icon appears on the display. Press again to unmute.

How do I change the language of the display?

Go to menu SETTINGS > LANGUAGE. Select your preferred language from the list (English, Spanish, etc.) and press OK.

The handset does not charge when placed on the base. What's wrong?

Ensure the charging contacts on both the handset and base are clean. Check that the power adapter is securely plugged into the base and the mains. Try aligning the handset properly. If issues persist, the battery or charger may be faulty.

User questions about CT1190 Campomatic

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

No questions yet. Be the first to ask one.

Download the instructions for your Telephone in PDF format for free! Find your manual CT1190 - Campomatic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CT1190 by Campomatic.

USER MANUAL CT1190 Campomatic

This is an our DECT basic model, the manual is designed to familiarize you with this phone. To get the maximum use from the phone, we suggest that you read this instruction manual carefully before using.

Important Notice : Please charge the battery for at least 12 hours before using

FEATURES

➢ LCD 3 lines display
➢ Maximum 5 handsets can be linked to the same base unit, and maximum 4 bases per handset.
➢ 16 kinds of interface languages for selection
▶ Pre-dial and edit function
▶ Redial and pause function
- 29 incoming numbers memories
➢ 50 Phone book memories with 12 characters & 20 digits maximum
➢ Call transfer to other handset and Intercom call between two handsets
➢ Conference call between external call and two handsets
➢ 10 ringing tones for selection
➢ Ringing tone/earpiece/handsfree volume adjustable
▶ Different melody for different call available
▶ Alarm clock function
▶ Tone/Pulse dialing mode can be set
➢ Flash time 100/300/600/1000ms for selection
➢ LCD backlight function
▶ Auto/manual answering function.
▶ Dialing barring function.
▶ Key lock function.
Mute function.
With ECO mode
➢ IN USE and CHARGE LED indicator

LCD DISPLAY/LCD MAP/KEY PAD DESCRIPTION

■ LCD display

The LCD displays in 3 lines, 1^st line for ICON, 2^nd line 12 numbers with 7-segment, 3^rd line 5*7 dot matrix (12 characters). The LCD map is shown below:

■ LCD Map

10:00:00 AM/01/00 (区) #00 20:00:00 PM/01/00 5 RPT NEW 00 888888888888 888888888888

Icon	Description	Function
	ANTENNA	The antenna icon will always be shown on the LCD, it indicates for Signal strength, flashes when registration to base is lost, when RSSI is low.
	OFF HOOK	The icon will be displayed when the user has pressedkey
	KEYLOCK_IND	This icon will be displayed when the handset keypad is locked.
	ALARM_IND	The alarm icon will be shown as steady on when the alarm is set.The alarm icon will flash when the alarm is triggered.
	RING OFF	The icon will be displayed when ring set to off
	PHONEBOOK	The phonebook icon will be displayed when viewing the phonebook entries.
	VMWI_IND	This icon will be shown when a new voice message is received from the network. WMWI full (flashing)
RPT	Repeat CID	Repeat call (indicate that the same calls received more than one time), and the icon will be displayed.
NEW	NEW CID	The icon will be displayed when a new call comes and hasn't beenreviewed yet.
[7ABA]	Sequence	When you press ▲ or ▼ key directly to scroll and review the numbers ,it appears along with the digit to indicate the sequence of the call
[K2C2]	HANDSFREE	The icon will be displayed when presskey
[74BC]	BATTERY_IND	The battery icon will provide both a charging indication and an indication of the current battery status to the user.
[X530]	A.M.	If time is morning 0 to 11:59:59' o'clock, the “AM” icon will be displayed.
[X044]	P.M.	If time is 12:00 to 23:59:59' o'clock, the “PM” icon will be displayed.

■ Key pad

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ 1 2 ABC 3 DEF 4 QHI 5 JKL 6 MNO 7 PDRS 8 TUV 9 WXYZ * r° 0 # x R/CLR MUTE RD/P ⑫ LCD ⑬ UP ⑭ SET/OK ⑮ DOWN ⑯ BOOK ⑰ HANG UP/POWER OFF ⑱ H.F ⑲ LINE ⑳ PAGE ⑶ RED CHANGE

① LCD

⑤ TALK

⑨ BOOK

⑬ MUTE

② UP

⑥ INT

⑩ HANG UP/POWER OFF

⑭ DC 6V

③ SET/OK

⑦ NUMERICAL KEY

⑪ H.F

⑮ LINE

④ DOWN

⑧ R/CLR

⑫ RD/P

⑯ PAGE

⑰ IN USE/CHARGE LED

Icon	Description	Function Definition
[KSCC]	Talk	In standby mode press once to take the handset into off hook mode;
[BAKW]	H.F	In standby mode press once to take the handset to hand free mode.
	SET/OK	Entry to the menu functions from idle mode; Confirming selections & actions.
	HANG UP /POWER OFF	In talk mode, press once to hang up the call; In standby mode, hold for 3 seconds to power down the handset.
	Phonebook/BACK	This key is used to enter the phonebook both in standby mode and in talk mode; Exiting from a function during menu operation;
###	UP	Scrolling up through lists and menu options; Increasing the volume; Review incoming number, outgoing number and phone number.
###	DOWN	Scrolling down through lists and menu options; Decreasing the volume. Review incoming number, outgoing number and phone number.
R/CLR	Flash/Delete	The key is used to delete memory. Delete the current input by a short pressing during menu edit; .
RD/P	Redial/Pause	In talk mode once pressing to redial the last dialed number; The key will perform PAUSE function if pressed after any digit input both in talk mode and in standby mode. Redial the last dialed number
###	Star/Lock	A Long press (3s) to activate key lock; To set up a conference call.
###	HASH	In addition to its use for text and number entry, To activate silence function by long press for 3s.
MUTE	Mute	In talk mode press the key to perform mute function.
	Page	Page the handset, Register the handset to a specified base.
INT	Intercom	To set up an internal call to another handset; To transfer an incoming call to another handset; To set up a conference call with an external line and an internal handset.

INPUT METHOD

press times key

one

two

three

four

five

six

seven

eight

nine

ten

eleven

twelve

thirteen

;

space

( )

INSTALLATION

1) Plug the main power lead into the bottom of the base unit.
2) Plug the main adapter into mains socket with the switch on the socket set to off.
3) Switch on main power at the socket.
4) Fit the batteries in the handset
5) Powering up the handset, press and hold key.

NOTE

If you do not modify the password yourself, all the passwords in this manual are default as 0000

During idle state, press the OK key to enter the menu setting, those are five "sub-menus" under the handset menu item.

■ PHONE BOOK
■ CALL LOG
■ BS SETTINGS
■ HS SETTINGS
■ REGISTRATION

Press ▲ or ▼ key to select the above items and then press OK key to enter. Press ↑ to quit the setting state, or press 📄 (Phonebook/BACK) to back to the previous menu. Details of each item are shown in next parts.

Each individual Handset has its own phonebook, independent of each other handset, with a maximum of 50 entries, each name a maximum of 12 characters, each number a maximum of 20 digits and a melody selected between 1 and 10.

Press ⚙️ OK key. Use ▲ or ▼ key to select PHONE BOOK. Then press ⚙️ OK key to confirm.

■ LCD will first shown: LIST. The function allows the user to review the phone book record lists by using the ▲ or ▼ key, besides, you can also make a call from phonebook.
■ Press ▲ or ▼ key to select NEW ENTRY item. This function allows the user to add an entry to the phone book.

1) If the phonebook is full, an appropriate message will be presented to the user as shown MEM IS FULL. If a free phonebook entry is available, the cursor for the name flashes.

2) Enter the name using the alphanumeric keys and press key to confirm.
3) If you make a mistake, press R/CLR key to correct.
4) Enter the number and press key to confirm
5) Press ▲ or ▼ key to select the melody to be stored and press OK key to confirm.

■ Press ▲ or ▼ key to select “EDIT RECORD” item. This function allows the user to modify a phonebook record.

1) Press OK key to enter, the first record in the phone book will be displayed.
2) Press ▲ or ▼ key to select the designated record to change. Once a record has been selected, the user will have the option to edit each of the name/number and change melody.

■ Press ▲ or ▼ key to select DEL RECORD item. This function allows the user to delete a phonebook entry.
■ Press ▲ or ▼ key to select DELETE ALL item. This function allows the user to delete all phonebook entries.
■ Press ▲ or ▼ key to select MEM STATUS item.. If show 10/50, it means total 50 records can be stored in the phonebook and 10 records has been stored in it already.

You can enter CALL LOG by pressing OK key. And there are three items in this menu, MISSED, RECEIVED and DIALED.

■ When LCD display CALL LOG

1) Press OK key to enter missed call lists, received call lists or dialed call lists.
2) The LCD will show the last record. (If no entries are available in the list, the LCD will be shown EMPTY).
3) Press ▲ or ▼ key to view other record.

■ When the record is show, press OK key, use ▲ or ▼ key to choose among ADD TO PB?

DELETE? DELETE ALL? Then press OKkey to confirm

ADD TO PB : this function allows the user to add an entry from the caller list to the phone book.

DELETE : this function allows the user to delete the currently selected entry from caller list

DELETE ALL : this function allows the user to delete all numbers

The user is able to change the base setting in base settings item, press OK key and use ▲ or ▼ key to select this item. Then you can do below:

DELETE HANDSET

This function allows the user to delete a handset registration from the base.

1) Press OK key, the first show is DELETE HS.
2) Press OK key to enter, the user will be prompted to enter the PIN code.
3) Input the correct 4-digit pin code using digit key.
4) Press ▲ or ▼ key to scroll the handset names list up and down.

5) Press OK key to confirm. The delete handset will be deleted from the list on registered handset on the base, and the handset will behave according to the out of range condition.

NOTE: Press and keep “☐” key for 5s, IN USE/CHARGE LED flashes, then press “☐” key 7 times swiftly, then the IN USE/CHARGE LED flashes quickly. Then logout the base successful till IN USE/CHARGE LED die out.

DIAL MODE

The user can select to change the mode in which the base will dial.

1) Press OK key, then using ▲ or ▼ key to select DIAL MODE item.
2) Press OK key to enter, and the display shows TONE.
3) Press ▲ or ▼ key to select the TONE or PULSE dial mode.
4) Press key to confirm your selection.

FLASH TIME

The user can select to change the flash time (100ms, 300ms, 600ms and 1000ms).

1) Press OKkey, then using ▲ or ▼ key to select FLASH TIME item.
2) Press key to enter.
3) Press ▲ or ▼ key to select the desired flash time among 100ms, 300ms, 600ms and 1000 ms.
4) Press key to confirm your selection.

MODIFY PIN

This function allows the user to change the pin number of the currently active base.

1) Press okey to confirm.
2) Then using ▲ or ▼ key to select MODIFY PIN item.
3) Press OK key to confirm, and the display shows PIN?

4) The user will first be requested to entry the existing PIN code for the base by using numerical keys, then press to confirm.

5) If the old code is validated, the user will be prompted to enter a new PIN code (4 digits), press to confirm.

6) Once a new PIN code has been entered, the user will be requested to repeat to input the new PIN code.

7) Press to confirm, the code will be stored to the base and a tone sounded.

BASE DEFAULT

This function allows the user to restore the base setting to the factory default.

1) Press OK key, then using ▲ or ▼ key to select BS DEFAULT item.

2) Press key to confirm.

3) The user will be prompted to enter the PIN CODE, the display shows PIN?, then press numerical keys to input code.

4) If the PIN code is validated all base settings will be returned to the factory default.

The user is able to change a number of the settings for the handset to their own individual preferences.

Using ▲ or ▼ key to select HS SETTINGS. Then you can do below:

> ALARM

The user is able to set the alarm on the handset and adjust the alarm settings.

1) Press OK key, the first sub-menu is ALARM item.
2) Press okey to confirm.
3) Press ▲ or ▼ key to select ON or OFF, and press OK to confirm. Selection of ALARM OFF will turn the alarm off, and the user is dropped back to the “ALARM” menu. Selection of ALARM ON option will turn the alarm on, then the user will be requested to set the alarm time.
4) After select ON, press OK key to start the time settings of alarm, 12-00 displayed with "12" flashing,
5) Press ▲ or ▼ key to edit the alarm time (including AM/PM)
6) Press OK key, the user will be presented with a further option to select to SNOOZE ON or SNOOZE OFF to enable or disable the snooze function on the alarm.
7) Press okey to confirm your selection. And the alarm icon will show on LCD.

■ Startup alarm:

In idle state, the alarm will ring at very sharp hour you have set.

■ Intermit alarm:

During the alarming, press any key except ⏻ (HANG UP/POWER OFF key), and will begin to ring after 6 minutes. When a call comes, the alarm will be intermitted too.

■ Close alarm:

Press ⏻ (HANG UP/POWER OFF key) to close alarm or enter alarm setting state, select OFF.

RING SETUP

The user is able to change the handset ringing on internal calls and External calls. There are 10 ringer melodies and 5 different volume levels can be set.

1) Press OK key, then using ▲ or ▼ key to select "RING SETUP" item.
2) Press key to enter.
3) Press ▲ or ▼ key to select the INT RING and EXT RING setup.
4) Press key to confirm.
5) Press ▲ or ▼ key to select the MELODY and VOLUME setup.

■ If select MELODY,

1) Press key to confirm.

2) Press ▲ or ▼ key to select desired melody, the corresponding melody sound can be heard with the selection.

3) Press key to confirm your selection.

■ If select VOLUME,

1) Press key to confirm.

2) Press ▲ or ▼ key to select desired ringer volume 1-5, the corresponding volume sound can be heard. if you want to switch off select OFF.

3) Press key to confirm your selection.

NOTE: 1) If you select ring OFF for INT RING, there will be no icon display on LCD, but when page or transfer call to this unit, it will not ring;

2) If you select ring OFF for EXT RING, there will be a ringing off icon ✗ display on LCD and when there is an incoming call, the unit will not ring.

TONE SETUP

The user is able to change the handset tone settings.

1) Press OK key, then using ▲ or ▼ key to select TONE SETUP item.
2) Press key to enter.
3) Press ▲ or ▼ key to select the KEY TONE and BATTERY LOW, RANGE ALARM setup.
4) Press key to confirm.
5) Press ▲ or ▼ key to select the ON or OFF to enable/disable the sounding of a beep respectively.
6) Press key to confirm your selection.

NOTE: after this setting,

■ a beep for key tone will sound when a key is pressed on the handset.
■ a beep for battery low then the battery is low.
■ a beep for range alarm will sound when the handset is out of ringed of the base

LANGUAGE

The handset will support up to 16 pre-defined languages.

1) Press OKkey, then using ▲ or ▼ key to select LANGUAGE item.
2) Press OK key to enter. First display is ENGLISH.
3) Press ▲ or ▼ key to select the language. Each language will display in its own native translation.
4) Press key to confirm your selection.

> HANDSET NAME

The operation will allow the user to change the handset name

1) Press OK key. Using ▲ or ▼ key to select "HS NAME",
2) Press OK key, when the function is selected, the screen will display the current handset label.
3) Enter the handset label, input the handset name.
4) If you make a mistake, press R/CLR key to correct.

5) Press

Campomatic CT1190 - > HANDSET NAME - 1

key to confirm.

AUTO ANSWER

The Handset can be set to answer an incoming call automatically when it is on the cradle. The user is able to select to enable/disable this auto answer feature.

1) Press OK key. Using ▲ or ▼ key to select AUTO ANSWER,
2) Press key to enter.
3) Press ▲ or ▼ key to select On or OFF
4) Press OK key to confirm your selection. Exit from this sub-menu will return the user to the AUTO ANSWER

BARRING

The Handset can be set to disable all external outgoing calls or special outgoing call. The user is able to select to enable/disable this feature. Note that internal calls to intercom or conference will still be available.

1) Press OK key. Using ▲ or ▼ key to select BARRING,
2) Press OK key the user will be prompted to enter the PIN code, input 4-digit code (defaulted as 0000).
3) Press OK key to confirm, then using ▲ or ▼ key to select ON or OFF, press OK key to confirm.
4) If select ON, the display shows NUMBER 1, press ▲ or ▼ to choose NUMBER i(i=1\~4).
5) Then press OK to confirm, using the numerical key to input number(maximum 4 digits) you want to barring.
6) Press to confirm. Repeat the above steps to set the rest of 3 groups.

After setting up the barring numbers, once you dial a number begin with anyone of them, LCD will display CALLS BARRED and the number is not allowed to be dialed out.

DATE & TIME

The user is able to set the date and time on the handset, by selecting the following option.

Press okey to enter date and time settings.

1) Press OK key. Using ▲ or ▼ key to select DATE&TIME,
2) Press OK key and the last two digits of the year flashes.
3) Edit the year, month, time and date by pressing ▲ or ▼ key.
4) Press OK key to confirm the setting, and return to the "DATE & TIME" menu.

NOTE: The date and time will be automatically set when the first caller ID message is received.

SELECT BASE

This function allows the user to register the handset to existing base(with other handset registration)

1) Press OK key, then using ▲ or ▼ key to choose SELECT BASE.
2) Press key and the LCD displays BASE 1 +.
3) Press ▲ or ▼ to select base(BASE 1\~4) or AUTO.
4) Press OK to begin searching, if you hear a sound of "di-du", means register successful.

HANDSET DEFAULT :

This function allows the user to restore the handset setting to the factory default.

1) Press OK key, then using ▲ or ▼ key to select HS DEFAULT item.
2) Press key to confirm.
3) The user will be prompted to enter the PIN CODE, the display shows PIN?, then press numerical keys to input code.
4) If the PIN code is validated all base settings will be returned to the factory default.

This function allows the user to register the handset to a specified base.

Before registering a handset to the base, the base should first be put into subscription mode, by pressing the “key till the base charge/In use LED flashing.

1) Press OK key, then using ▲ or ▼ key to select REGISTRATION item.
2) Press key to enter.
3) Press ▲ or ▼ key to select BASE names.
4) Press OK key to select base as required, the display shows SEARCHING.

If the base is found and the handset successfully registered, the PIN code screen will be displayed, then enter the pin code(defaulted as 0000, if input wrong number, press R/CLR to delete)

■ If the base is not found, the handset will return to the previous registration state.
If the PIN code entered is invalid, an error tone is sounded, and the Handset will return to the previous registration state.
If have several handsets, repeat the above steps to register another handset, and the successfully registered handset will displays HS2 or HS3 on the LCD according to the registration sequence.

NOTE: Press Ⓞ key to page the handset when difficult to look for.

OPERATION

Speakerphone operation & volume control

Press 🔒 key once to obtain a dial tone, dial your number, when you hear the called party answers the phone. You can begin your conversation without picking up the handset, you can also answer an incoming call by pressing the 🔒 key once.

During the speakerphone operation, the user can adjust the speaker volume level by pressing the ▲ or ▼ key .Total 6 levels for selection.

Mute the mouthpiece

During a call, press MUTE key once to mute the mouthpiece and MUTE will show on LCD. Press MUTE key again to get back to the call and the MUTE will disappear.

Caller ID – type I & II

■ TYPE I

After you have applied the caller ID service, you can see the caller party phone number during an incoming ring.

■ TYPE II

During the conversation, the phone number of the incoming call of the third party can be seen in the unit.

This function can be worked when the user applied the Telecom service.

Auto timer

The timer will start automatically after 6s of the telephone line is engaged.

Flash (R)

Press R/CLR key to reset the line with our leaving the handset.

Pause

Press RD/P key will insert a time delay of 3.6 seconds in a dialing sequence.

Pre-dialing

The unit has pre-dialing function, when you may enter and edit the number before dial it out.

The following procedure describes how to use this function:

In idle mode, enter the number you want to dial. During entering, you can press R/CLR key to correct the number.
Press or key once, the unit will dial out the number show on the LCD.

Redial function

Press key or key,
Press RD/P key, the last dialed number will be dialed again

NOTE: the maximum length of name & number are 12 characters & 20 digits respectively.

Name matching

If you have edit the incoming message with different name, next time with the same incoming number will display the modify name.

Review /delete /call back incoming numbers

Review

In on hook state, press ▲ key once and then use ▲ or ▼ key to scroll and review the incoming numbers

Delete

When the desired number displayed on LCD, press R/CLR key one time to delete it.

▶ Call back

When the desired number is shown, press or key to dial out the number.

Review /delete /call back outgoing numbers

Review

In on hook state, press ▼ key once and then use ▲ or ▼ key to scroll and review the incoming numbers

Delete

When the desired number displayed on LCD, press R/CLR key one time to delete it.

Call back

When the desired number is shown, press or key to dial out the number.

Edit & copy incoming messages to phonebook

The user can store the incoming number to the phone book based on the following procedures:

1) Press ▲ key once, LCD will show the last received record.

2) Press ▲ or ▼ key to select the designated message.

3) Press key to select "ADD TO PB".

4) Press key to confirm to edit the incoming message.

5) The user can delete the character by pressing R/CLR key.

6) If there is no change, press OK key to confirm and the record will be copied from caller list to phone book.

View & dial out phone numbers from phonebook

There are 50 phonebook memories; each memory can store 12 characters and 20 digits.

1) In on-hook state, press key.

2) Then press ▲ or ▼ key to review the number.

3) When the desired number is shown on LCD and press the 📋 or 🔒 key to dial out the number automatically.

Memory full

There are 50 phone book memories.

The LCD will show memory full when all memories have been occupied in the phone book, the user should delete some messages which are stored in the phonebook.

Intercom

The intercom feature is activated by pressing the INT key.

In idle mode, press INT key once.
The user will be prompted to select the number of the internal handset with which you wish to connect.
The destination handset will ring.

Once the call is connected, the display will be shown on both handsets. To end intercom mode, either handset can hang up the call by press key.

Call transfer

During a call, it's to transfer the call to another handset.

During a phone call, press INT key once, you will be prompted to select the number of the internal handset with which they wish to connect.
The destination handset will ring. With the melody defined for an internal call.
Press the or key of the other handset to accept the call.

The two internal handsets will be connected. To complete the transfer of the call, the initiating handset should be placed on the cradle and the external call will now be connected to the second handset.

Party conference call

When a call comes, Press (HS1) or key
Then press (HS1) INT key once, you will be prompted to select the number of the internal handset with which you wish to connect.
The destination handset will ring.
Press (HS2) the or key to accept call.
Press (HS1) then the ✗* key then you can talk all together.
Press ⏻ (HANG UP/POWER OFF) to quit the party conference, and other parties can also continue to communication.

To Lock/Unlock the keypad

To lock the keypad

Press and hold the *key for about 2 seconds.

You will hear a beep tone, the icon ⚫ will appear on the top of display, "HS LOCKED" will appear on LCD.

While the keypad is locked, any key you press is invalid.

To unlock the keypad